1 / 19

Report 7 Two flasks

Report 7 Two flasks. Team Taiwan Franklin Liou. Problem # 7. H. H. h. ?. ?. Investigate and describe in which tube the water goes up faster and in which the final height is greater. How does this effect depend on the time of heating?. Overview. Introduction Experiment

reyna
Télécharger la présentation

Report 7 Two flasks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Report 7Two flasks • Team Taiwan • Franklin Liou

  2. Problem # 7 H H h ? ? Investigate and describe in which tube the water goes up faster and in which the final height is greater. How does this effect depend on the time of heating?

  3. Overview • Introduction • Experiment • Experimental Setup • Experiment • Results and Discussion • Conclusions & Summary

  4. Experiment Setup The heating apparatus and sensors • Pressure sensor • Thermocouple • 1300ml flask (200ml water) • Hot plate • Oil bath (for heating dry flask)

  5. Experiment Setup Water reservoir Transparent tube and long ruler

  6. Experiment • Initial conditions: 100 oC • Conditions • Flask with and without water • Heating time after reaching 100 oC(1min, 2min, 5min) • Data • Temperature-Time curve • Pressure-Time curve • Water height-Time curve

  7. Experiment Results: Dry Flask • Height-Time curve is roughly a saturation curve • Maximum height: 1.72m • Temperature-Time curve is roughly an exponential decay • Max: 103oC, Min:31oC • Decay rate:0.0026

  8. Experiment Results: Dry Flask • Pressure-Time curve is roughly an exponential decay • Maximum pressure: 103 kPa • Minimum pressure: 84 kPa

  9. Experiment Results: Wet Flask • Temperature-Time curve is roughly an exponential decay • Max: 100oC, Min:31oC • Decay rate:0.0011 • Height-Time curve is roughly a saturation curve • Maximum height: 8.6m

  10. Experiment Results: Wet Flask • Pressure-Time curve is roughly an exponential decay • Maximum pressure: 101 kPa • Minimum pressure: ~ 5 kPa

  11. Results and Discussion • Newton’s Law of Cooling: We can obtain the decay rate , and hence the approximate T(t) function Square of residual: 0.99974

  12. Dry flask • Ideal gas law: expansion of dry air~1900Pa h h • A cross section of tube • R: Ideal gas constant • T: temperature at a given time • V0: initial volume • P0:initial pressure • N1: initial mole of gas

  13. Dry Flask Results H=64.86-5.00*Sqrt(159.67+7.36*Exp(-0.0312t))

  14. Wet flask • Water vapor can fill almost all volume -> condense -> large pressure difference~101300Pa • Antoine equation: • Assuming water vapor replaces all air

  15. Wet Flask Results

  16. Comparison of Wet and Dry Flask

  17. Results and Discussion

  18. Conclusions & Summary • Two flaks : two mechanisms • Dry flask: expansion of air~ 1.9 kPa • Wet flask: condensation of vapor~ 101300 Pa • Water rises faster in wet flask condition • Maximum water height is greater in wet flask • Maximum water height and water rising speed is independent of time of heating

More Related