1 / 4

NSQP MEETING 20-01-2011

NSQP MEETING 20-01-2011. Laminate the NTC-HV and PS harnesses. Assembly Name: PP1 Penetration Tape Parts requires : ISP HV –NTC PCB ISP PS PCB.

rguadalupe
Télécharger la présentation

NSQP MEETING 20-01-2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NSQP MEETING 20-01-2011

  2. Laminate the NTC-HV and PS harnesses Assembly Name: PP1 Penetration Tape Parts requires: ISP HV –NTC PCB ISP PS PCB Tools/Consumables: 1. supporting block for NTC-HV 2. supporting block for PS 3. alcohol 4. roller 5. 3M™ VHB™ Tape 25mm 6. Kapton (thickness 0,17mm) 7. Kapton Tape 25mm

  3. Laminate the NTC-HV and PS PSB 3M™ Tape Inspect HV PCB visually. Remove label. Clean PCB surface with alcohol. Attach 3M™ Tape (See diagram) (use a roller). Attach Kapton(use a roller) Attach 3M™ Tape (See diagram) (use a roller.) Install the HV PCB in the supporting block. remove the foil and set the following PCB. Follow task from 2 to 8. Kapton 3M™ Tape

  4. Laminate the NTC-HV and PS PSB Inspect PS PCB visually. Remove label. Clean PCB surface with alcohol. Attach 3M™ Tape (See diagram) (use a roller). Attach KaptonTape Attach 3M™ Tape (See diagram) (use a roller.) Install the PS PCB in the supporting block. Remove the foil and set the following PS PCB. Follow task from 2 to 8. 3M™ Tape Kapton Tape

More Related