1 / 4

TBE 2730 PBX Software

TBE 2730 PBX Software. PBX Software. Switching systems – software intensive Processor, software tables control hardware functions Routing and features Built in IP router Alarms and Maintenance are software driven. PBX Software. Call Scenario (analog)

roanna-watkins
Télécharger la présentation

TBE 2730 PBX Software

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TBE 2730 PBX Software

  2. PBX Software • Switching systems – software intensive • Processor, software tables control hardware functions • Routing and features • Built in IP router • Alarms and Maintenance are software driven

  3. PBX Software • Call Scenario (analog) • Circuit pack monitor port for change of state • Sense off hook (loop closure for analog loop start) • Dialtone applied to port • Listens for tones (digits, *, #) • Digits collected and sent to processor via timeslot on backplane/bus • Processor looks at dialplan and routing tables • If digits dialed matches on-net extension in dialplan then processor checks extension/port database • If it finds match then it looks at port location • Processor sends message through Proc. Int. Card to Network Control Card to reserve timeslot on bus/backplane • Processor then sends message via timeslot on backplane/bus to port circuit packs to send ringing voltage down ports • When port circuit pack senses off hook on called stations port, timeslot that was reserved is cut through to both ports • Port circuit packs monitor ports for disconnect • When on hook is sensed port sends message to processor via bus to free up timeslot on bus • Processor sends message via Proc. Int. Card to Network Control Card to free up timeslot on bus • Same process if call if off net except trunk port is utilized and digits are outpulsed via Tone card to far end switch

  4. PBX Software • Avaya Command Structure • Action • Add • Remove • Change • Object • Station • Hunt group • Qualifier • 1234 • 99 • Help is your friend. Use it!

More Related