1 / 4

Yuri Ermoline Level-1 Calorimeter Trigger General Meeting, CERN December 15, 2011

VME test card for VME/ACE/TTC interface for CMX. Yuri Ermoline Level-1 Calorimeter Trigger General Meeting, CERN December 15, 2011. Initial idea. VME CPLD. VME/TTC/ACE parts of CMM 2 CPLDs + 1 FPGA Redesign HW with new components Parts obsoleteness Merge VHDL a single design

ronda
Télécharger la présentation

Yuri Ermoline Level-1 Calorimeter Trigger General Meeting, CERN December 15, 2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. VME test card for VME/ACE/TTC interface for CMX Yuri Ermoline Level-1 Calorimeter Trigger General Meeting, CERN December 15, 2011

  2. Initial idea VME CPLD • VME/TTC/ACE parts of CMM • 2 CPLDs + 1 FPGA • Redesign HW with new components • Parts obsoleteness • Merge VHDL a single design • FW porting on new HW • Fit design into (single?) newer XILINX CPLD • Implement on a daughter card • Different implementations • Use later on CMX • 6U VME test card for • Hardware implementation • FPGA re-configuration • Software TTC FPGA ACE CPLD TTCrx FC CPLD SystemACE Daughter card FPGA 6U VME card

  3. Preliminary studies Two CPLDs merged in one design and compiled in new CPLD XILINX CoolRunner-II XC2C256-6-PQ208 Macrocells: 160/256(63%); Pins: 137/173(80%) TTC FPGA complied in XILINX Spartan-3AN XC3S200AN-FTG256 Slices: 131/1792(7%); Pins: 69/195(70%) TTC FPGA use internal memory and can’t be complied in CPLD 2 CPLDs and TTC FPGA merged in a single FPGA design Spartan-3AN XC3S200AN-FTG256 Slices: 286/1792(15%); Pins: 165/195(84%) Do we need to keep the CPLD safeguard against a malfunction in the FPGA configuration process Single FPGA implementation Configuration from EEPROM Configuration from internal flash memory (Spartan-3AN) Configuration from Flash Card (System ACE)

  4. Next steps Development process: CADENCE schematics of the 6U VME card based on CMM schematics Launch PCB layout/production/assembly Design daughter card(s) In parallel work on FW Different daughter card implementations CPLD (CoolRunner-II) + FPGA (Spartan-3AN) Single FPGA (Spartan-3AN) Test of FPGA configuration failure Procedure? Re-configuration On time-out? Via DCS?

More Related