1 / 26

Just-In-Time (JIT)

Just-In-Time (JIT). JIT : an integrated set of activities designed to achieve high-volume production using minimal inventories of raw materials, finished goods & work in process. JIT ………………………………………….

rory
Télécharger la présentation

Just-In-Time (JIT)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Just-In-Time (JIT) JIT: an integrated set of activities designed to achieve high-volume production using minimal inventories of raw materials, finished goods & work in process. JIT

  2. JIT ………………………………………… AIPCS “a philosophy of manufacturing based on planned elimination of all waste and on continuous improvement of productivity”. “JIT objective “ To produce the ‘right part’ in the ‘right place’ at the ‘right time’ “

  3. Introduction(Cont……….) “JIT “ also called “lean manufacturing “ “stockless production “ JIT targets to improve profits and return on investment by reducing inventory levels (increasing the inventory turnover rate).

  4. JIT Revolution Just in time revolution –Japan became the international economic power . JIT –Term applied for only production scheduling and inventory management where the products are produced only to meet actual demand and material for each stage of production are received and produced just in time for the use of next stage of production and delivery to the customer . jit : the entire way product were designed work was organized responsibility were assigned was transformed and constant striving for improvement and elimination of waste was instilled.

  5. An ideal production system and JIT One product to produce Demand is constant at rate one unit every t units of time Customers and recourses are available at the production site No defects in the material No operational defects and no breakdown Production process time is in multiple of purchases

  6. Symptoms…… • Excess Inventory • Product have to be scrapped (poor quality and over production) • Poor product quality and late delivery to the customer JIT not only reduces inventory and scrap but also eliminates demand variation, unreliable delivery of material, defects, machine break down, processing time variation and excessive setup time.

  7. JIT and classical production system JIT differ from the classical system in two ways Scheduling of production related to demand The size of production(Lot size) Classical System—Speculative demand Demand is folded back based upon the procurement or production lead time of each step in a production process to determine when production has to begin. To determine demand , production is initiated by scheduling the first production stage and the output is pushed throughout the production stage.(pushed production system)

  8. Contd…… JIT System Short term is not based on demand forecast, rather it is based on replenishing stocks that are depleted by actual sales .specially when inventory f the product drops to the certain level the final stage of the production process signals that more of the product is needed soon . The final stage of the process then begin production as soon as possible . This requires that inventory of the input to the final stage to be maintained . This process continue all the way back to the first production stage .

  9. Contd…. • With the approach production of specific is entitled by the final stage of production in response to the actual or assured demand the production process is pulled through the system.

  10. Charataristics ……….. PROCESS DESIGN ……………………… Small lot size :: “ideal lot size “—single unit “small lot size enable JIT to operate efficiently”

  11. Setup time reduction………… “in JIT ‘workers are trained to do their own setups’ “multipurpose equipment and setup procedures must be simple and standardized”. “group technology are used to reduce setup costs and time”

  12. Small lot size • Goal is to reduce lot sizes as much as possible. • Small lot size both in operation and delivery allow JIT system to operate effectively. • Benefits • In process inventory becomes less in JIT. • it reduces the carrying costs, space requirements and clutter in work spaces . • Inspection and rework costs when problem with quality occur (few items to inspect ).

  13. Manufacturing cells …………………… Cells contains machine and tools Process similar processing requirements . Cells are highly standardized and efficient production centers. Benefits……………….. “Reduce changeover times “ “High utilization of equipment” “Ease of cross training operator “

  14. Quality improvement…………………….. “Finding and eliminating the cause of problem so they do not continually crop up”. “JIT system minimize defects through use of ‘AUTOMATION’ “ “”JIDOKA””-automatic detection of defects during production Jidoka uses two machine --- For detecting defects To correct the cause of the defects

  15. Inventory storage …………………….. “JIT system – designed to minimize inventory storage “ “inventory storage is wastage “- JIT philosophy Benefits Less carrying costs Less space needed Less rework if defects is needed Less tendency to rely on buffer

  16. Cont………………… Close vendor relationship— “vendors should supply high quality goods with frequent delivery” “poor quality of goods cause disruption in smooth flow in work” “Goal – to identify a vendor as a producer of high quality goods”

  17. PULL VERSUS PUSH SYSTEM:: “Push system”: when work is finished at a workstation ,the output is pushed to the next workstation. “Pull system” : control of moving the work rests on the following operation. each workstation pulls the output from preceding work station as it is needed. In pull system work moves on in response to demand from the next stage in process ,in push work moves on as it is completed ,without regards to the next station readiness for the work.

  18. Pull System • Produce only when material is needed downstream…(cue from the user not the planning source) • Pull materials sequentially through the factory. • Orders placed at end item level. • Idle material is waste. • Need discipline…(Good practices reinforced through training) JIT

  19. Push System • Production authorized in anticipation of needs downstream…(cue is a work order from the planning system) • Orders launched to meet due dates. • Keep machines & people busy. JIT

  20. KANBAN???? A kanban is a card that is attached to a storage and transport container.  It identifies the part number and container capacity, along with other information, and is used to provide an easily understood, visual signal that a specific activity is required

  21. KANABAN ………………………………………….. • Kanban scheduling systems are among the most simple, effective and inexpensive means for manufacturing production and inventory control • they reduce inventory, eliminate stockouts, displace massive computers and slash overhead. • They improve both service and quality. • Kanban scheduling systems are useful when lot sizes differ between process steps, processes are unbalanced or when distance introduces time lag or variability. These systems slightly de-couple the processes

  22. Benefits of Kanban Systems • Visual Production • Scheduling • Improved Inventory Control • Increased Inventory Turns • Lower Inventory Dollars • Improved Orderliness on the factory floor • Reduce wasted time looking for material

  23. Setup Reduction • Setup reduction is the process of reducing the time required to convert from production of the last good piece of unit A to the first good piece of unit B. • use methods engineering/common sense. • Ideal lot size = 1. JIT

  24. Setup Reduction (Cont.) • Setup activities: • External: Operations performed while the machine is running. • Internal: Operations performed after the machine is stopped. • Setup…responsibility of the operator. JIT

  25. Where JIT is feasible? JIT applies primarily to repetitive manufacturing processes in which the same products and components are produced over and over again. E.g... MacDonald. JIT focus on establishing the flow process by linking the workstation so that there is an even, balance of materials between the workstation and throughout the entire production process. “work station are assembles like assembly line balancing”

  26. . Thanks

More Related