1 / 12

Dia Casting And Its Types By Alpha Metal Industries

Dia Casting And Its Types By Alpha Metal Industries

roshanipatel
Télécharger la présentation

Dia Casting And Its Types By Alpha Metal Industries

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dia Casting And Its Types By Alpha Metal Industries

  2. The casting process is subdivided into two distinct subgroups: 1 - Expendable mold casting (sand, plastic, shell, and investment (lost-wax technique) mouldings.) 2 - Nonexpendable mold casting (permanent, die, centrifugal, and continuous casting). Classification of die casting: (a)Gravity Die Casting (also called permanent mould process) (b)Pressure Die Casting

  3. Aluminum Pressure Die Casting [ pressure die Casting Techniques] [Die casting Fence fittings] [Die cast Part of automobile]

  4. There are two basic types of die casting machines: (1)hot-chamber machines (2) cold-chamber machines (Hot Die Casting machine)

  5. cold-die-casting machine

  6. ALUMINUM GRAVITY DIE CASTING

  7. Structure: (Intermediate cooling rates from melt result in a dendritic microstructure.

  8. Minimum wall thicknesses and minimum draft angles for die casting are :

  9. Die casting materials: • Zinc: the easiest alloy to cast; high ductility; high impact strength; easily plated; economical for small parts; promotes long die life. • Aluminum: lightweight; high dimensional stability for complex shapes and thin walls;. • Magnesium: the easiest alloy to machine; excellent strength-to-weight ratio; lightest alloy commonly die cast. • Copper: high hardness; high corrosion resistance; highest mechanical properties of alloys die cast; excellent wear resistance.

  10. Common aluminum alloys for die casting are summarized as follows:

  11. Advantages: • Excellent dimensional accuracy • Smooth cast surfaces (1—2.5 μm rms). • Thinner walls can be cast • Inserts can be cast-in (such as threaded inserts, heating elements ) • Reduces or eliminates secondary machining operations. • Rapid production rates. • tensile strength as high as 415 MPa . Disadvantages: • Casting weight must be between 30 grams and 10 kg • Casting must be smaller than 600 mm • High initial cost. • Limited to high-fluidity metals. • A certain amount of porosity is common. • Thickest section should be less than 13 mm • A large production volume is needed to make this an economical .

  12. Created by www.alphametalind.com

More Related