Download
1 / 7
70 likes | 75 Vues
It is much better to opt for a sprinkler system that can be prefabricated on the ground and installed in one piece than having one installed section by section at the location.
E N D
Overview Typically most of the pipe hangers and supports manufacturersproduce similar loop hangers as they are a stock product. Though they have marginal material cost and are adequate at holding the pipe, they can be very expensive due to the long and tedious process of installation. Constructors usually place a pipe by sliding each section through the pipe hanger individually and then add turns, sprinkler heads, and branch lines later. The whole process is time-consuming and involves hours of dangerous overhead work.
1. More time to prepare As many different professionals need to work in the same space for their separate tasks, there usually is a short time limit for the sprinkler installers to accomplish their entire project. They need to start quickly, finish the whole system and leave the site, all within a strictly scheduled time. However, if prefabricating, they do not require waiting for access to the location to start their work and can attach sprinkler heads and branch lines at a different location. After that, they can simply carry the assembled parts and install it quickly and conveniently.
2. Profit margin Prefabrication saves a lot of time that the contractors spend on a particular worksite for installation, thus letting them earn higher profits by accomplishing more work in less time. In most sprinkler systems, labor makes up for the most significant part in the final cost of the entire project. As the parts are assembled earlier, the labor cost is reduced hence benefiting both the contractor as well as the customer.
3. Scrap reduction On the worksites, pieces of pipe and small quantities of other hardware are often discarded if they are not immediately utilized. When components are assembled at the shop prior to installation, they significantly bring down the number of wasted materials as unused pieces of hardware can easily be stored for use in future projects. Minimization of waste helps cost savings and once again saves money for both the contractors as well as the customers.
Contact Details: Visit the website: https://www.nut-clamps.com/ https://www.facebook.com/SakethExim/ https://twitter.com/sakethexim1 https://plus.google.com/113801728045258482907 https://www.pinterest.com/sakethexim0454/ https://www.instagram.com/sakethexim/
