1. BTP-650 • All Weather Design • Main Patio + Patio Pairing Speakers • Includes 30 foot Speaker Cable • “State of the Art” Bluetooth Operation • Connect to any Bluetooth enabled device • AC Power 100-240V Transformer Extra Long Power Cord to • Main Patio Speaker needed for Internal Bluetooth Receiver and • Stereo Power Amplifier found in Main Patio Speaker Black White Speaker Type: Woofer: Tweeter: Internal Power: Frequency Response: Impedance: Bluetooth Range: Dimensions: Pack Weight: Unit: 6.5” 2-way Indoor/Outdoor Patio Speaker 6.5” Polypropylene Cone with Butyl Rubber Sound 1.0” Soft Dome Tweeter 10-50 Watts 38Hz – 20KHz 8 Ohm 120 to 150 feet (unobstructed) 50’ to 75’ (obstructed) 17.7”L x 13.4”W x 12.8”H 19.8 lbs Pair Ideal for Patios, Decks, and Pool Areas Patio Speakers

2. Contents: 30’ Speaker Wire To connect the speakers together for stereo R&L 110-240V Power Supply for Master Speaker Pairing Speaker Master Speaker Bluetooth Receiver Internal Stereo Amplifier Range you get may differ… Distances both unobstructed and obstructed may differ depending on Device you are trying to use to sync up to the BTP-650. Make sure both your Bluetooth device and the OSD BTR-800 are turned on… This may seem obvious, but people often overlook the most glaring issue. To pair two Bluetooth enabled devices, both of them must be turned on and fully powered or charged, if they use batteries Only one connection at a time… The BTR-800 syncs with only one device at a time, you must disconnect the current device before Syncing to another device 30’ Speaker Wire To connect the speakers together for stereo R&L Patio Speakers