'Assembly sequence' diaporamas de présentation

Modular Coil Assembly Bolted Joint PDR 2/22/07

Modular Coil Assembly Bolted Joint PDR 2/22/07. Objectives. The review objectives include... Define the location of additional inboard bolts Finalize the material selection and design of the shim and washers Establish the minimum bolt preloads for both types of joint

593 views • 40 slides

Cryomodule Concept for the ODU RF Dipole Crab Cavity

449 views • 33 slides

NCSX Field Period Assembly

NCSX Field Period Assembly. October 31, 2007 Mike Viola Field Period Assembly Manager. +. +. =. FPA is Accomplished in Four Stages. Station 1 - VV Prep. Station 2 - MC Half Period Assembly. Station 3 - MCHP installation over VV Period. Station 5 - Final Assembly in NCSX Test Cell.

367 views • 26 slides

CS 326 A: Motion Planning

CS 326 A: Motion Planning. http://robotics.stanford.edu/~latombe/cs326/2003 Assembly Planning. Problem. Discriminator (42 parts): mechanical safety device designed to prevent accidental operation of a system. Levels of Problems.

308 views • 15 slides

Phase 1 FPIX Cooling

Concept for routing and assembly sequence for the cooling lines beyond the Half-Disks and through mount blocks for POH/Portcards and the DC-DC converter assemblies. Phase 1 FPIX Cooling. Return Tubes. Supply Tubes (between HDs and POH / Portcards). DC-DC Converter Bus boards.

363 views • 13 slides

Status of the AFC at RAL

Status of the AFC at RAL. Tom Bradshaw John Cobb Win Lau Matt Hills Elwyn Baynham Mike Courthold Victoria Bayliss. 7 th February 2011. Introduction. Talk will cover Recent progress at TESLA Staffing Changes Test Plan for AFC at RAL. Recent Progress.

206 views • 13 slides

Assembly Sequence Analysis

Assembly Sequence Analysis. Liaison diagrams lead to assembly sequence Assumptions: parts are rigid liaison stays put once made. Generating Feasible Sequences. Make drawing and parts list Generate liaison diagram Answer precedence questions local constraints on movement

87 views • 5 slides

An Analytical Method for the Planning of Robust Assembly Tasks of Complex Shaped Planar Parts

An Analytical Method for the Planning of Robust Assembly Tasks of Complex Shaped Planar Parts. Stemmer, A. Albu-Schaeffer, and G. Hirzinger Institute of Robotics and Mechatronics, German Aerospace Center (DLR), Germany. The assembly sequence is automatically generated and parameterized.

91 views • 1 slides