'Load cases' diaporamas de présentation

AMS Thermal Control System (TCS): A Status Report

644 views • 46 slides

AMS Thermal Control System (TCS): A Status Report

468 views • 46 slides

Wind Turbine Control Design to Reduce Capital Costs

Wind Turbine Control Design to Reduce Capital Costs. P. Jeff Darrow (Colorado School of Mines) Alan Wright (National Renewable Energy Laboratory) Kathryn E. Johnson (Colorado School of Mines). Overview. Introduction Wind Turbine Description Baseline Controller Description

518 views • 39 slides

TE/MSC/CMI Section meeting Guidelines for mechanical design and fabrication of cryostats

TE/MSC/CMI Section meeting Guidelines for mechanical design and fabrication of cryostats Conformity with pressure regulations May 21, 2013 by D. Ramos. Scope and Outline. Why are cryostats bound to regulations and their implications Designing and checking the design

363 views • 35 slides

S taple P in S imulation

S taple P in S imulation. MSC.Patran 2005 r2 MSC.Marc 2005 r2. Estimated Time for Completion: ~35min Experience Level: Lower. Topics Covered. Topics covered in Modeling Defining the system of units. Importing Geometry file. Parasolid format (.x*t*)

390 views • 30 slides

Peer Review Evaluation of Revised Cross Section TF Winding Pack

Peer Review Evaluation of Revised Cross Section TF Winding Pack. Kalish 9/15/04. Charge / Outline. Design Evolution and Comparison Analysis Cost / Schedule/ Vendor Impact Design Comparison. Original TF Wedged Winding Pack Cross Section vs New Design. Existing Design. New Design.

362 views • 29 slides

National Wind Technology Center

Wind Turbine Design According to IEC 61400-1 (Onshore) and -3 (Offshore) Standards Overview for NWTC November 8 , 2005 Sandy Butterfield NREL. National Wind Technology Center. Outline. Overview of design process IEC standards organization Load cases Determination of design load

476 views • 28 slides

Offshore wind turbine design Addressing uncertainty drivers

Sten Frandsen Niels Jacob Tarp-Johansen Erik Asp Hansen Michael Høgedal Lars Bo Ibsen Leo Jensen. Risø National Laboratory Risø National Laboratory DHI – Water and Environment Vestas Wind Systems Aalborg University ELSAM Engineering.

376 views • 24 slides

Structural Analysis of Mechanical Modules For Modular Designed Nuclear Plants June, 2011

Structural Analysis of Mechanical Modules For Modular Designed Nuclear Plants June, 2011. By: Steven K. Sherfey, P.E. Presented By: Ankit (Andy) J. Patel. Agenda . Modular Construction Mechanical Modules Design & Analysis of Mechanical Modules Design Requirements Special Modeling Techniques

321 views • 23 slides

CAESAR II STATIC LOAD CASE EDITOR

1.08k views • 22 slides

Wind Turbine Certification in Turkey ICCI 2010 - 13.05.2010

Wind Turbine Certification in Turkey ICCI 2010 - 13.05.2010. ACCREDITATION. ISO 17021 SWEDAC. TS EN ISO 17021 TURKAK. TS EN ISO/IEC 17020 TURKAK. Total Installed Capacity (World). 2020 (EU Plan). 2009. 159.213MW. Total Capacity:. ???. 350.000 MW. 550.000 employed p.

312 views • 18 slides

317 views • 16 slides

PIPE FEA USING ANSYS

PIPE FEA USING ANSYS. FEA and ANSYS. Finite Element Analysis (FEA) A numerical technique used for finding approximate solution of physical problems Only through the use of modern day computers, FEA becomes effective and practical ANSYS

796 views • 14 slides

PIPE FEA USING ANSYS

PIPE FEA USING ANSYS. FEA and ANSYS. Finite Element Analysis (FEA) A numerical technique used for finding approximate solution of physical problems Only through the use of modern day computers, FEA becomes effective and practical ANSYS

457 views • 14 slides

MSC.Fatigue 2000 Wheels Module

MSC.Fatigue 2000 Wheels Module. DEVELOPED IN COLLABORATION WITH BFG AEROSPACE AND nCODE. MSC.Fatigue- Wheels PROCEDURE. QSG - Demo Model. Multiple Results - Travel. N=36 Static Load Cases. Stress-time history created for each load condition.

317 views • 14 slides