1 / 39

i DCS 100

i DCS 100. Cabinet construction based on existing Compact 2 3 Expansion slots in main cabinet 2 types of types of expansion cabinet Expn A Expn B. MISC. DCS slot. 2SLI. MEM. Universal Slots. Universal Slots. Ringer. PSU. System Structure. Main Cabinet. Expansion Cabinet.

shawna
Télécharger la présentation

i DCS 100

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. iDCS 100 • Cabinet construction based on existing Compact 2 • 3 Expansion slots in main cabinet • 2 types of types of expansion cabinet • Expn A • Expn B

  2. MISC DCS slot 2SLI MEM Universal Slots Universal Slots Ringer PSU System Structure Main Cabinet Expansion Cabinet • 6 Universal slots • 6 x 8 ch slots • 1 slot for TEPRI or • SVMi-8 • 32 ch slot

  3. Basic Cabinet • Expanded memory size • from 2MB to 3MB • Support both existing cards • and new cards • (Backward Compatibility) MISC 2SLI MEM Slots for expansion cards Ringer PSU

  4. Power Supply Unit • 110V/220V Free Voltage • Accommodate up to 48 KTS • 40 KTS when using the SVMi-8 PSU

  5. Expansion Cabinet A • Highway channel relocation • First 3 Slots support 8 port • cards • Last Slot(4th) supports 32 port • cards – PRI, TEPRI or SVMi-8 • Support both existing cards • and new cards • (Backward Compatibility) Slots for CII & iDCS100 cards Slot for DCS card

  6. Expansion Cabinet B • Highway channel relocation • First 2 Slots support 8 port • cards • Slot 3 for SVMi-8 • Last Slot(4th) supports 32 port • cards – PRI or TEPRI • Support both existing cards • and new cards • (Backward Compatibility) Slots for CII & iDCS100 cards Slot for DCS card

  7. YES YES YES NO NO NO 9.6K NO YES YES YES YES YES 19.2K 19.2K YES Memory Cards • Memory Card - Two Options: • MEM 3 (EPROM) - 3MB • MEM 4 (flash memory) - 8 MB plus LAN and SIO interface Windows PCMMC VoIP TEPRI Q-SIG LAN SIO LAN SIO MISC S/W Upload MEM 3 3MB EPROM MEM 4 Flash memory w/ LAN

  8. TEPRI Card • Same card with iDCS 500 • TEPRI card required for • networking features (Q-SIG) • Plus MEM4 • TEPRI card must be placed on • the last (4th) slot • Available to use existing PRI T E P R I

  9. VoIP Board I T M 3 iDCS 100 Sized Card • New ITM3 card for iDCS 100 • H.323 V3 • 8 Channels maximum Minimize

  10. Total Capacity - approximately 100 ports Extensions Digital - 48 max Analogue - 48 max OPX – 2 PSTN trunks – 36 BRI - 24 channels PRI - 30 channels VoIP - 8 channels System Capacities

  11. System Capacities • Auto Attendant - 4 channels • 12 levels • ACD group comfort messages • I/O ports • 2 serial on MISC card • LAN 10/100 base T plus extra I/O port- MEM 4 Card required • Internal Modem for remote system access • Voicemail • SVMi-4 (Flash memory) - 4 ports • SVMi-8 (HDD) - 8 ports • takes up last slot in Expansion cabinet

  12. System Capacities • DECT • 3 Base Stations • 24 Handsets • Miscellaneous • MOH • 1 internal, 2 External, Voicemail • Internal Paging - 4 groups • External Paging - 4 groups • Common Bell • Alarm Contact

  13. Motherboard • 8 Digital keyphone Interfaces [2B + D] • 1 External MOH port • 1 Internal MOH source • 1 Paging Port • 3 Universal Slots • Provision for PLL board • Provision for Ringer Module

  14. Interface Cards • 2 SLI • Memory Board • Misc. 1 Card • Misc. 2 Card • Modem Card • PLL

  15. Interface Cards • 3 TRK - loop start + 2 PFT • 6 TRK - loop start + 2 PFT • 8 DLI [1B + D] • 8 SLI • AA Card

  16. Interface Cards • PRI • TEPRI • 2 BRI • 4 BRI • ITM3 • AC 15

  17. Misc. 1 card • Additional 4 DTMF receiver/senders • 2 x RS232 ports (3 ports with MEM4) • Additional BGM port • Additional Page port • 3 Common purpose relays • provision for modem card

  18. Misc. 2 card • As per the Miscellaneous 1 • Plus a 4 port AA

  19. Keyphone Daughter Boards • KDB-DLI for extra keyphone • KDB-SLI for extra SLI • Can only be fitted to keyphone on Motherboard • Don’t install with keyphone “live”

  20. iDCS 100Installation • P1 for connections on motherboard

  21. iDCS 100Installation • P2 for connections on the 3 expansion slots

  22. iDCS 100Installation • Ringer Unit required for any SLI extensions

  23. iDCS 100Installation • PLL card required for any ISDN card

  24. iDCS 100Installation • 2 cct SLI card

  25. iDCS 100Installation • MISC slot for either MISC 1 or 2

  26. iDCS 100Installation • MEM slot for either MEM3 or MEM4

  27. iDCS 100Installation • 3 expansion slots for DLI card, SLI card, BRI card etc

  28. iDCS 100Installation • Connection leads to main cab

  29. iDCS 100Installation • Earth lead

  30. iDCS 100Installation • Illustration of connected expn cabinet • DON’T FORGET THE SCREWS

  31. iDCS 100Installation • P5 for connections on 3 expansion cards

  32. Doorphone Interface Module • DPIM can be fitted to all systems • Connects to DLI port

  33. 24 Button Display Keyphone

  34. 12 Button Display Keyphone

  35. 6 Button Display Keyphone

  36. 6 Button Basic Keyphone

  37. DS 2100B

  38. 48 Button AOM

  39. The End

More Related