1 / 13

6.1: Solid Shapes

6.1: Solid Shapes. Expectation: G2.2.1 : Identify or sketch a possible three-dimensional figure, given two-dimensional views (e.g., nets, multiple views). Create a two-dimensional representation of a three-dimensional figure. Isometric Drawing.

shiela
Télécharger la présentation

6.1: Solid Shapes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 6.1: Solid Shapes Expectation: G2.2.1: Identify or sketch a possible three-dimensional figure, given two-dimensional views (e.g., nets, multiple views). Create a two-dimensional representation of a three-dimensional figure. 6.1: Solid Shapes

  2. Isometric Drawing • An isometric drawing is a drawing in which the horizontal lines of the object are drawn at 30° angles to the horizontal. This gives us the appearance of 3 dimensions. 6.1: Solid Shapes

  3. Isometric Drawing 30º 30º 6.1: Solid Shapes

  4. Draw a cube on isometric dot paper. 6.1: Solid Shapes

  5. For edges that exist but cannot be seen, we draw dashed lines. These dashed lines are called hidden lines. 6.1: Solid Shapes

  6. Make an isometric drawing of a stack of cubes that is 3 cubes tall. 6.1: Solid Shapes

  7. Complete Activity #1 on page 373 (first 2 drawings in #1 & 2). Complete Activity #2 on pages 373. 6.1: Solid Shapes

  8. Orthographic Projections • Orthographic projections are views of an object in a direction perpendicular to the plane of the object. 6.1: Solid Shapes

  9. Orthographic Views • There are 6 basic orthographic projection views: • front, back, top, bottom, right and left side views 6.1: Solid Shapes

  10. Draw the six basic orthographic projection views of the figure below. 6.1: Solid Shapes

  11. Draw the six basic orthographic projection views of the figure below. 6.1: Solid Shapes

  12. Draw the 6 orthographic projection views of the figure below. What are the volume and surface area of the figure? 6.1: Solid Shapes

  13. Assignment • pages 375-377, • # 12-16 (evens), 21-26 (all), 28, • 31-34, 38-43 (except 41) 6.1: Solid Shapes

More Related