1 / 4

1. Thermo-optic switch based on total internal reflection

Calculate the angle and length increments for a thermo-optic switch, array waveguide grating, and splitter in a waveguide system.

sstamper
Télécharger la présentation

1. Thermo-optic switch based on total internal reflection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. n1 n2 1. Thermo-optic switch based on total internal reflection The refractive index n1 of the waveguide is 1.459. The material has the temperature effect: If we want effective switch at T = 30K what’s the  angle between the two waveguides?

  2. L0 +(m-1)L d D L0 2. Array waveguide grating (AWG) The refractive index of the waveguide is Nc=1.459, and the refractive index of the slab is ns=1.462. D = 250µm, and d = 50µm. The wavelength  =1.5µm. What’s the length increment L if we want the AWG has the resolution of 1nm. f = 1cm

  3. 3. Splitter  = 100µm-1 1 3 For A1(0) = A1, A2(0) =0 A1(z) A2(z) Un-connected port 4 What’s the coupling length needed to have 20% splitting ratio?

  4. 4. Waveguide gratings A1(z)|z=0 = A1(0) A1(z)  = 100µm-1 A2(z) )|z=L = 0 A2(z) What’s the length of the grating needed to achieve 98% reflections?

More Related