1 / 53

Technical Theater

Technical Theater. Terms, Movement, Safety, Practices. PROSCENIUM - the arch that separates the stage from the auditorium. STAGE WINGS: the spaces on either side of the stage. STAGE DIRECTIONS:. CURTAINS:. GRAND DRAPE:. TRAVELLER:. In PAC - located Center Stage and Upstage.

stuart-hale
Télécharger la présentation

Technical Theater

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Technical Theater Terms, Movement, Safety, Practices

  2. PROSCENIUM - the arch that separates the stage from the auditorium

  3. STAGE WINGS: the spaces on either side of the stage

  4. STAGE DIRECTIONS:

  5. CURTAINS: GRAND DRAPE:

  6. TRAVELLER: In PAC - located Center Stage and Upstage

  7. TEASER, TORMENTOR, LEG, BORDER

  8. APRON: PAC apron is 10’ deep

  9. Continental Seating:

  10. American Seating:

  11. CYCLORAMA - a drop (sky drop) that provides the illusion of open sky. Hung far upstage.

  12. NOTICE: Cross-grain direction (perpendicular to joint) on keys and corners to improve strength. Same applies to straps on cornerbraces

  13. For a 4’ x 12’ Flat: Rails = 4’ Stile = 12’ minus the width of the 2 rails (2 @3 1/2) = 7”… SO… ?

  14. NOTICE: the two cornerbraces are on the same side - never opposite sides For a 4’ x 12’ Flat: Rail = 4’ Stile = 12’ minus the width of the 2 rails (2 @3 1/2) = 7”… SO… 11’ 5” NOTICE: keys, corners, and straps are INSET the width of the stock (3/4”) to allow butt-up

  15. Cornerblocks and keystones are secured using an 11 nail/screw pattern for cornerblocks, and a seven to 10 nail/screw pattern depending on fastener and usage.

  16. TOOL QUIZ: WHAT IS IT CALLED?

  17. TOOL QUIZ: WHAT IS IT CALLED? TAPE RULE OR TAPE MEASURE

  18. TOOL QUIZ: WHAT IS IT CALLED?

  19. TOOL QUIZ: WHAT IS IT CALLED? PUTTY KNIFE

  20. TOOL QUIZ: WHAT IS IT CALLED?

  21. TOOL QUIZ: WHAT IS IT CALLED? BALL PEIN HAMMER (pound metal, cut gaskets and seal rivets)

  22. TOOL QUIZ: WHAT IS IT CALLED?

  23. TOOL QUIZ: WHAT IS IT CALLED? WOOD CHISEL

  24. TOOL QUIZ: WHAT IS IT CALLED?

  25. TOOL QUIZ: WHAT IS IT CALLED? CLAW HAMMER

  26. TOOL QUIZ: WHAT IS IT CALLED?

  27. TOOL QUIZ: WHAT IS IT CALLED? NAIL SET

  28. TOOL QUIZ: WHAT IS IT CALLED?

  29. TOOL QUIZ: WHAT IS IT CALLED? PRY BAR

  30. TOOL QUIZ: WHAT IS IT CALLED?

  31. TOOL QUIZ: WHAT IS IT CALLED? WRECKING BAR

  32. TOOL QUIZ: WHAT IS IT CALLED?

  33. TOOL QUIZ: WHAT IS IT CALLED? SPEED SQUARE OR QUICK SQUARE

  34. TOOL QUIZ: WHAT IS IT CALLED?

  35. TOOL QUIZ: WHAT IS IT CALLED? CARPENTERS SQUARE

  36. TOOL QUIZ: WHAT IS IT CALLED?

  37. TOOL QUIZ: WHAT IS IT CALLED? CHALKLINE

  38. TOOL QUIZ: WHAT IS IT CALLED?

  39. TOOL QUIZ: WHAT IS IT CALLED? I-BEAM LEVEL

  40. TOOL QUIZ: WHAT IS IT CALLED?

  41. TOOL QUIZ: WHAT IS IT CALLED? TORPEDO LEVEL

  42. TOOL QUIZ: WHAT IS IT CALLED?

  43. TOOL QUIZ: WHAT IS IT CALLED? SPRING CLAMP

  44. TOOL QUIZ: WHAT IS IT CALLED?

  45. TOOL QUIZ: WHAT IS IT CALLED? BAR CLAMP

  46. TOOL QUIZ: WHAT IS IT CALLED?

  47. TOOL QUIZ: WHAT IS IT CALLED? C- CLAMP

  48. TOOL QUIZ: WHAT IS IT CALLED?

  49. TOOL QUIZ: WHAT IS IT CALLED? ADJUSTABLE WRENCH OR CRESCENT WRENCH

  50. TOOL QUIZ: WHAT IS IT CALLED?

More Related