1 / 28

Powered Industrial Truck 29 CFR Part 1910.178 How to Comply

Powered Industrial Truck 29 CFR Part 1910.178 How to Comply. Powered Industrial Truck. Defined A mobile, power-propelled truck used to carry, push, pull, lift, stack, or tier materials. Excluded Vehicles designed for earth moving or over the road haulage. Reasons for Standard.

susanclark
Télécharger la présentation

Powered Industrial Truck 29 CFR Part 1910.178 How to Comply

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Powered Industrial Truck29 CFR Part 1910.178How to Comply

  2. Powered Industrial Truck • Defined • A mobile, power-propelled truck used to carry, push, pull, lift, stack, or tier materials. • Excluded • Vehicles designed for earth moving or over the road haulage.

  3. Reasons for Standard • 100 fatalities and 36,340 serious injuries in general industry and construction annually. • 20 - 25% of the accidents are, at least in part, caused by inadequate training.

  4. Fatalities by Age Group

  5. Operator Training • Must consist of a combination of: • Formal Instruction • Practical Demonstration • Operator Evaluation

  6. Who Should Conduct the Training • Must have necessary knowledge, training and experience to train operators and evaluate their competency

  7. Trainees • Must be under the direct supervision of persons who have the knowledge, training and experience to train operators and evaluate their performance • Where operation does not endanger the trainee or others

  8. Refresher Training & Evaluation • Observed operating unsafely • Occurrence of accident or near miss • Evaluation reveals unsafe operation

  9. Refresher Training Needed?

  10. Refresher Training & Evaluation Cont… • Operator assigned to a different type of truck • Workplace condition changes that could affect safe operation • Evaluation must be conducted once every three years & after refresher training

  11. Avoidance of Duplicative Training • If an operator has previously received training in a topic, and the training is appropriate to the truck and working conditions encountered, additional training in that topic is not required if the operator has been evaluated and found competent to operate the truck safely.

  12. Certified Operator • Each employer must certify that each operator has been trained and evaluated • Certification must include: • Name of the operator • Date of the training • Date of the evaluation • Identity of the trainer(s)

  13. Training Content • HANDOUT of required training program content

  14. Truck Capability and Limitations • Information plates • Type of truck • Truck capacity • Truck weight • Truck Manual • Gauges • Controls • Switches

  15. Pre-Operational Inspection • Leaks • Tires • Hoses/belts/cables • Mast/forks • Safety equipment • Gauges/controls • Horns/Alarms • Brakes

  16. Serious Defects • Defects that would put the truck out of service • Faulty brakes • Steering problems • Fuel system complications • Hydraulic leaks

  17. Pre- Operation • Mount and dismount facing the lift truck • Adjust seat, mirrors and apply seat belt • Familiarize yourself with the controls and gauges • Survey your surroundings

  18. Picking up the Load • Make sure the load is within the rated load capacity • Check the load for stability • Approach the load slowly and straight on • Ensure the forks are centered to evenly distribute the weight of the load • Make certain the load is balanced and secure

  19. Picking up the Load Cont… • Drive forward until the forks are into the load all the way so the load is resting against the carriage • Raise the load high enough only to clear the traveling surface, then tilt the mast back • Check behind, to both sides and above prior to moving

  20. Traveling with a Load • Keep the load tilted back slightly • Travel with forks low as possible • If load blocks view, travel in reverse • Make smooth controlled turns and stops • Pedestrians have the right of way • Lift or lower load only when completely stopped

  21. Placing a Load • Inspect the area for load placement • Stop and slowly raise the load to desired height • Place the load squarely • Look and then back up slowly • Lower the forks

  22. STAY IN YOUR TRUCK

  23. Stability Triangle • Support points for the truck are located at points A, B, and C

  24. Stability Triangle • How can the center of gravity shift outside the triangle? -Carrying too heavy a load -Moving with an elevated load -Turning the lift truck while moving too fast -Operating the truck on an incline -Starting/Stopping too fast -Jerky operation of the hydraulic system

  25. Parking • Fully lower forks and neutralize controls • Shut power off • Set parking brake • Chock wheels if parked on an incline • Do not block exits

  26. Refueling & Recharging • Park in a designated area • Wear PPE • Ensure there is sufficient ventilation • No Smoking • Have a fire extinguisher near by

  27. Training Summary • Each forklift operator must be trained • Designate forklift trainer(s) and put together an effective training curriculum • Maintain accurate training records • Evaluate operators performance as required

  28. Questions • For more information, refer to www.osha.gov, or • Contact your local area OSHA office

More Related