1 / 13

BASIC TELCOMMUNICATIONS 66 BLK

BASIC TELCOMMUNICATIONS 66 BLK. 66 blocks are prevalent in the telecommunications industry Today they are used primarily for phone applications only. 66 block . BASIC TELCOMMUNICATIONS 66 BLK.

tadhg
Télécharger la présentation

BASIC TELCOMMUNICATIONS 66 BLK

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BASIC TELCOMMUNICATIONS 66 BLK • 66 blocks are prevalent in the telecommunications industry • Today they are used primarily for phone applications only 66 block

  2. BASIC TELCOMMUNICATIONS 66 BLK • There are many variations of 66 blocks we’re going to focus on the two most commonly used type of 66 block which is the 66B for CAT 3 and 66M for CAT 5 applications

  3. BASIC TELCOMMUNICATIONS 66 BLK • The 66B/M is a split block that provides the capacity to terminate a 50 pair cable or (2) 25 pair cables or (12) 4 pair cables

  4. BASIC TELCOMMUNICATIONS 66 BLK • 66 blocks come with a separate mounting bracket that is labeled for a specific orientation

  5. BASIC TELCOMMUNICATIONS 66 BLK • The 66 bracket provides a stand off from the back board so that cables can be passed behind the block • The openings on the side are provided to route cables and pairs from behind the block up to the termination point on the face of the block

  6. BASIC TELCOMMUNICATIONS Here is an example of 4 pair cables fanned out from the sides of the block and terminated on the front of the 66 block

  7. BASIC TELCOMMUNICATIONS 66 BLK • All multi-pair cables are terminated on the first row of a 66 block • The adjacent column is used for cross wiring.

  8. BASIC TELCOMMUNICATIONS 66 BLK Here is an example of cross connects between 66 blocks, note the wires that are stretched diagonally across the blocks that is an example of what not to do.

  9. BASIC TELCOMMUNICATIONS We are going to build a link similar to the one below, however we will concentrate on only the wall jack to the 66 block by the end of the course we will install this same system from beginning to end.

  10. BASIC TELCOMMUNICATIONS You will mount a 66 block on the backboard and run a quad cable to a biscuit jack also mounted on the backboard.

  11. BASIC TELCOMMUNICATIONS • Any time you terminate a communications cable onto a screw terminal device in the telecommunications industry it is automatically considered a category 3 device • As you recall a POTS line is considered category 1 • We will go through the steps of terminating a POTS line onto a CAT 3 jack and the other end will terminate to a 66 block

  12. BASIC TELCOMMUNICATIONS Components and tools needed for wiring a basic phone link:

  13. BASIC TELCOMMUNICATIONS Preparing the wire ends for termination onto screw terminals It is important not to wrap the wire around the screw, it will break when the screw is tighten down INCORRECT CORRECT

More Related