1 / 44

Transmission Basics ITNW 1325, Chapter III

Transmission Basics ITNW 1325, Chapter III. OSI Physical Layer. Physical Layer. Overview : Facilitates transmission of signals over network media – copper cable, fiber optics cable, or a wireless medium

tannar
Télécharger la présentation

Transmission Basics ITNW 1325, Chapter III

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Transmission Basics ITNW 1325, Chapter III

  2. OSI Physical Layer

  3. Physical Layer Overview: • Facilitates transmission of signals over network media – copper cable, fiber optics cable, or a wireless medium • Signals travel as electrical current in a copper cable, as light pulses, and as EM waves in these media • Defines and implements physical communications principles – signaling, multiplexing, duplex modes, etc. • Communications problems that occur have affect all other layers and thus security of communications • Better understanding of its principles and technologies enables fast recovery from network failures

  4. Physical Layer Network Media:

  5. Physical Layer Network Media (continued):

  6. Physical Layer Network Media (continued):

  7. Signaling Types

  8. Signaling Types Analog: • Implies continuously changing voltage or intensity – signal appears as a wavy line when graphed over time • Possesses four common characteristics – amplitude, frequency, wavelength, and phase • Amplitude – the measure of the wave’s strength at any given point in time (maximum deviation from center) • Frequency – the number of full cycles of the amplitude in a second (measured in Hz, KHz, MHz, GHz, etc.) • Wavelength – the distance between consequent similar points on a wave (measured in length units)

  9. Signaling Types Analog (continued): • Phase – a measure of the progress of a wave over time in relation to a fixed initial point • Quite variable – can convey greater subtleties with less energy (human vs. computer voice) • Continuous in nature – carry imprecise signal levels that are further affected by interference and environment

  10. Signaling Types Analog (continued):

  11. Signaling Types • Digital: • Implies encoding logical bits – binary zeroes and ones – into precise levels of voltages or medium intensities • Fit perfectly the binary nature of computer data – both wired and wireless LANs use digital signaling only • Transmission of discrete pulses is more resistant to interference – brings lower compensation overhead • Requires more complex communication equipment

  12. Signaling Types Compared:

  13. Analog Modulation

  14. Analog Modulation Overview: • Enables modification of analog signals to carry useful data – not all media can carry digital signals • Employs two devices – transmitter and receiver – and two waves – a carrier wave and a data wave • Acarrier wave has well-known wavelength, frequency, amplitude, and phase – conveys information • Adata wave carries data to be transmitted – used for alteration of one of the carrier wave’s parameters • A transmitter combines the two waves for data – by modifying one of the the carrier wave’s parameters

  15. Analog Modulation Overview (continued): • Alterations of the carrier wave’s amplitude, frequency, or phase produce AM, FM, or PM analog modulations • The resultant analog wave carries useful information – transmitted over the medium to the receiver • The receiver is aware of the carrier wave’s original parameters – reads information from it by comparing the actual wave received to the original one

  16. Analog Modulation • Amplitude (AM): • Implies modifying the maximum amplitude at each peak of the carrier wave – with higher peaks standing for logical 1s and lower peaks representing logical 0s • Susceptible to interference • Frequency (FM): • Implies modifying the duration of consequent carrier wave’s cycles – with shorter cycles representing logical 1s and longer cycles representing logical 0s • Less susceptible to interference than AM

  17. Analog Modulation Amplitude, Illustration:

  18. Analog Modulation Frequency, Illustration:

  19. Analog Modulation • Phase (PM): • Implies modifying the carrier wave’s phase according to bit changes between 1 and 0 in the data signal • Requires most complex equipment types of all

  20. Analog Modulation • Use Examples: • Radio broadcast stations use AM or FM • Television broadcast stations use AM for video, FM for sound, and PM for color

  21. Digital Modulation

  22. Digital Modulation Overview: • Employs three techniques that are similar to AM, FM, and PM – abbreviated ASK, FSK, and PSK • Relies on discrete signal levels – not affected by interference as much as analog signals • Digitally modulated signals enable effective error-correcting techniques and require less power • Used broadly by modern communication systems

  23. Digital Modulation • Amplitude Shift Keying (ASK): • Carrier signal (positive voltage or intensity) encodes a binary 1 and no carrier signal encodes a binary 0 • Resembles analog amplitude modulation

  24. Digital Modulation • Frequency Shift Keying (FSK): • Higher frequency (tighter wave) encodes a binary 1 and lower frequency (wider wave) encodes a binary 0 • Resembles analog frequency modulation

  25. Digital Modulation • Phase Shift Keying (PSK): • One change in phase encodes transition to a binary 1 while other change encodes transition to a binary 0 • Resembles analog phase modulation

  26. Duplex Modes

  27. Duplex Modes Overview: • Reflect possible directions of a data flow – as well as possible utilization of both directions at a time • Simplex – signals can travel in only one direction (example – a broadcast radio station) • Half-duplex – signals can travel in both directions but in only one direction at a time (example – a walkie-talkie) • Full-duplex – signals can travel in both directions simultaneously (example – a telephone conversation) • The duplex mode can be specified by humans or negotiated between computer devices

  28. Duplex Modes Overview (continued):

  29. Duplex Modes Full Duplex: • Maximizes data rates in both directions – beneficial for modern computer networks that use it widely • One physical channel would commonly be used for transmitting data while another one – for receiving it • Example – multiple wires used for sending and receiving data combined into single network cable • Must be supported by both communication peers in order for them to communicate – may be negotiated too

  30. Duplex Modes Full Duplex (continued):

  31. Relationships

  32. Relationships • Overview: • Reflect possible numbers and types of hosts sending and receiving data over a network • Point-to-Point (PtP, Unicast) – implies one specific sender and one specific intended receiver (example – a WAN connection between business locations) • Point-to-Multipoint (PtM) – implies one specific sender and multiple defined or undefined receivers • Broadcast – a point-to-multipoint relationship that implies one specific sender and multiple undefined receivers (example – TV and radio stations)

  33. Relationships • Overview (continued): • Multicast – a point-to-multipoint relationship that implies one specific sender and multiple defined receivers (example – audio and video conferences)

  34. Relationships Overview (continued):

  35. Relationships Overview (continued):

  36. Relationships Overview (continued):

  37. Throughput and Bandwidth

  38. Throughput and Bandwidth • Overview: • Bandwidth – a difference between the highest and lowest frequencies that the medium can transmit (Hz) • Throughput – a number of bits transmitted per second (reflects a real communication data rate) • Bandwidth correlates with maximum achievable data rate while throughput measures the actual data rate • The two are not the same thing but get mixed up often

  39. Throughput and Bandwidth • Examples: • Bit per second – equivalent to 1 bit per second, abbreviated bps • Kilobit per second – equivalent to 1000 bits per second, abbreviated Kbps • Megabit per second – equivalent to 1,000,000 bits per second, abbreviated Mbps • Gigabit per second – equivalent to 1,000,000,000 bits per second, abbreviated Gbps

  40. Throughput and Bandwidth • Examples (continued): • Hertz – equivalent to 1 oscillation per second, abbreviated Hz • Kilohertz – equivalent to 1000 oscillations per second, abbreviated KHz • Megahertz – equivalent to 1,000,000 oscillations per second, abbreviated MHz • Gigahertz – equivalent to 1,000,000,000 oscillations per second, abbreviated GHz

  41. Throughput and Bandwidth • Examples (continued): • Residential cable and DSL connections provide throughput of up to 30 and 3 Mbps, respectively • Modern wired and wireless local area networks provide up to 10 Gbps and up to 1.3 Gbps, respectively

  42. Multiplexing

  43. Multiplexing • Overview: • Enables splitting the network medium into multiple data channels in order for multiple signals to travel at once • Effectively increases the amount of data transmitted over the medium available during a time frame • A multiplexer combines signals at the sending end – with a demultiplexer separating them at the receiving end to obtain the original separate data streams back • Type of multiplexing used depends on what the media, transmission, and reception equipment can handle, with several types used most commonly

  44. Multiplexing Overview (continued):

More Related