1 / 22

Minimum Energy Mobile Wireless Networks

Minimum Energy Mobile Wireless Networks. IEEE JSAC 2001/10/18. Outline. Introduction Network layer requirements The power consumption model Minimum power networks Distributed network protocol Simulations Conclusion. Introduction.

telyn
Télécharger la présentation

Minimum Energy Mobile Wireless Networks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Minimum Energy Mobile Wireless Networks IEEE JSAC 2001/10/18

  2. Outline • Introduction • Network layer requirements • The power consumption model • Minimum power networks • Distributed network protocol • Simulations • Conclusion

  3. Introduction • This paper present a position-based algorithm to set up and maintain a minimum energy network between users that are randomly deployed over an area and are allowed to move with random velocities. • Each node has a low-power globe positioning system (GPS) receiver on board. • The protocol is self-reconfiguring in mobile scenarios.

  4. Network Layer Requirements • A network graph is said to be “strongly connected” if there exists a path from any node to any other node in the graph. • This paper take one of the nodes to be the information sink for all nodes in the network. They call this node the “master-site.”

  5. The Power Consumption Model • This model has three components • Small-scale variations • Large-scale variations • Path loss

  6. The Power Consumption Model • Small-scale variations • These are modeled by a Rayleigh distribution. • A wireless communication receiver is designed with diversity reception to combat small-scale variations. (Rake receiver) • In a rake receiver, a technique called maximum ratio combining (MRC) is used to optimally combine these independent stream.

  7. The Power Consumption Model • Large-scale variations • The received signal power averaged over small-scale variations. • A outage probability is specified for large-scale variations. The transmitter must adjust its transmit power to satisfy the specification.

  8. The Power Consumption Model • Path loss • The received signal power averaged over large-scale variations has been found to have a distance dependence which is well modeled by 1/d n. • The path loss may normally depend on the heights of the transmit antenna

  9. The Power Consumption Model • Directly transmit form A to C will consume more power than relay the message through node B.

  10. Minimum Power Networks • Consider three node i(transmitter), r(relay), and j(destination). The position of j is (x,y). • Definition 1- relay region: the relay region Ri→j of the transmit-relay node pair (i,j) is defined to be

  11. Minimum Power Networks • Definition 2-deployment region: any bounded set in R2 that has the position of the nodes in Ñ as a subset is said to be a deployment region. • Definition 3-enclosure and neighbor: the enclosure of a transmit node i is define as the nonempty solution εi to the set of the equations

  12. Minimum Power Networks

  13. Minimum Power Networks • Definition 4-enclosed node: a node i is said to be enclosed if it has communication links to each of its neighbors. • Definition 5-enclosure graph: the enclosure graph of a set of nodes Ñ is the graph whose vertex set is Ñ and whose edge set is where li→k is the directed communications link from i to k.

  14. Minimum Power Networks • Theorem 1-strong connectivity: fix the deployment region DÑ for a set of node Ñ.The enclosure graph of Ñ is strongly connected.

  15. Distributed Network Protocol • The main idea of this protocol is that a node does not need to consider all the nodes in the network to find the globe minimum power path to the master-site. • This protocol can divide into two parts: • Phase1: search for enclosure • Phase2: cost distribution

  16. Distributed Network Protocol • Phase1 : Search for Enclosure • Each node in the algorithm starts a search by sending out a beacon search signal that include the position information. • Every node runs exactly the same algorithm. Then it will concentrate on a particular node and call it the transmit node. • The transmit node listens for nearby nodes and calculates the relay region for them.

  17. Distributed Network Protocol • The transmit node must keep only those nodes that do not lie in the relay region of previously found nodes. • Each time new nodes are found, the transmit node must update it relay graph.

  18. Distributed Network Protocol • If a node found (call it k) falls in the relay region of some other found (call it j), then we mark k “dead”. We say that j “blocks” k. • If a node is not blocked by any other node found in this search, then we mark the node “alive”. • The set of alive nodes constitutes the set of neighbors for transmit node i when the search terminates.

  19. Distributed Network Protocol • Phase2 : Cost Distribution • The algorithm finds the optimal links on the enclosure graph. • The cost of a node i is defined as the minimum power necessary for i to establish a path to the master-site.

  20. Distributed Network Protocol • Each node calculates the minimum cost it can attain given the cost of its neighbors. Let nN(i). When i receives the information Cost(n), it computes: then i compute

  21. Simulations

  22. Conclusion • This paper present a routing protocol which find the minimum power topology for a stationary ad hoc network environment. • Brief and to the point, this paper modeled the ad hoc network as the spanning tree then find the minimum spanning tree.

More Related