1 / 59

TopSURV RTK

TopSURV RTK. Creating a new job for Radio RTK Survey with Hiper II. TopSURV – Start. Tap on. TopSURV - RTK. Tick this to use Bluetooth. Select the device to use. TopSURV – Main menu. Tap here.

tender
Télécharger la présentation

TopSURV RTK

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TopSURV RTK Creating a new job for Radio RTK Survey with Hiper II

  2. TopSURV – Start Tap on

  3. TopSURV - RTK Tick this to use Bluetooth Select the device to use

  4. TopSURV – Main menu Tap here Tips: Warning will appear when it is in demo mode. For user who have activation key this warning will not appear.

  5. TopSURV - RTK Only “default” job is available if you run TopSURV for the first time Select the device to use

  6. TopSURV - RTK Tap here Tap here

  7. TopSURV Tap here Enter name Tips: For controller without keyboard, the TopSURV will display an input keyboard once user taps in any empty columns. Tips: for controller with built-in keyboard, user can simply use it to enter name.

  8. TopSURV Tap here Tap here

  9. TopSURV – RTK Tap Tap Tips: You can create your own survey configurations by tapping on “Add”. Post Processing – Active post processing logging mode for backup

  10. TopSURV - RTK Tap here Select the base and rover manufacturer This will simulate GPS signal mostly used for training

  11. TopSURV - RTK To select multiport Tap here to continue Select RTK format to use Enter elevation mask Select receiver model Select antenna type and height

  12. TopSURV – RTK Base Tap Tap Note: If you are using external radio example TRL-35. Please select TRL-35 and port A

  13. TopSURV – RTK Base Tap Tap Remember the setting

  14. TopSURV – RTK Rover Tap Tap Tap Make sure the setting match what you set on base

  15. TopSURV – RTK Rover Tap • Solution Type:- • Fixed – Accuracy 10mm or less • Float and DGPS – Accuracy 0.5m or less • Autonomous – Accuracy more than 10m Auto accept allow user to chose whether accept the measurement by average or precision • Auto Topo method allow user to collect topo via :- • By Hz Dist – based on horizontal distance • By Slope Dist – based on slope distance • By Time – based on time

  16. TopSURV – RTK Tap Horizontal tolerance of you stake out point Reference direction for your stake out point Solution to use for stake out Auto accept allow user to chose whether accept the measurement by average or precision

  17. TopSURV – RTK Tap Tap

  18. TopSURV – RTK Tap Tap

  19. TopSURV – Coord System Tap Tap

  20. TopSURV – Coord System Tap Tap Enter the require information if you don’t know what to enter please check with your local authority

  21. TopSURV – Coord System Tap Tap Get those value from your local authority

  22. TopSURV – Coord System Tap Tap Tap Search for the projection you just created

  23. TopSURV – Geoid Tap Tap

  24. TopSURV – Geoid Tap Tap Note: gff can be created using Topcon Link using geoid file supply by your local authority

  25. TopSURV – Geoid Tap Tap

  26. TopSURV – Geoid Tap Select Tap

  27. TopSURV – Coord System Tap Tap Tap

  28. TopSURV – Change menu Tap

  29. TopSURV – Status Tap Tap

  30. TopSURV – Status Tap Tap

  31. TopSURV – Start Base Tap Tap Tap Tap Auto Pos: Only use auto pos when you do not know you base coordinate and will enter it when you post process you data on Topcon Tools. Please note you are unable to change the coordinate of the base once you use “Auto Pos”

  32. TopSURV – Start Base Tap Tap Tap

  33. TopSURV – Start Base Tap Tap Tap Select channel to use. To get more channel please request from TSPS workshop Select output power normally for base it is 1W however some time you might need to lower down this to get a better link Select protocol and modulation to use. Note: If modem setup fail you will require to configure the radio using ModemTPS. Please refer to ModemTPS presentation.

  34. TopSURV – Start Base Tap Tap Tap

  35. TopSURV – RTK Tap

  36. TopSURV - Rover Select the rover Tap here to activate Bluetooth dialog

  37. TopSURV – RTK Tap Tap

  38. TopSURV – RTK Topo Tap Tap Set the same setting as what you have done at the base

  39. TopSURV – RTK Topo Tap Tap Note: If modem setup fail you will require to configure the radio using ModemTPS. Please refer to ModemTPS presentation.

  40. TopSURV – RTK Topo Tap Tap Tips: You can check status without exiting Topo.

  41. TopSURV – RTK Topo Tap Tap

  42. TopSURV – RTK Topo Tap Tap Tips: Topo Point Name starts from 100 by default.

  43. TopSURV – RTK Topo Tap Tap Tips: Topo Point Name automatically increases by 1 after 1 measurement.

  44. TopSURV – RTK Topo Tap Tap

  45. TopSURV – RTK Topo Tap Tap Tips: Map view to select Start and End Pt.

  46. TopSURV – RTK Topo Tap Tap Tap Tips: Go to Point List view to select Start and End Pt.

  47. TopSURV – RTK Topo Tap Tap Tap 101

  48. TopSURV – RTK Topo Tap Tap 101 5000 Tips: Click on each button for reverse direction, e.g. Forward-> Backward, Right->Left, etc. Symbol changes as well.

  49. TopSURV – RTK Topo Tap Tap 1.000m 101 102 5000 Tips: Offset Point Name automatically increases by 1 after 1 measurement.

  50. TopSURV – RTK Topo Tap Tap

More Related