The Best Solutions for your assembly goods!

1. Iron & Ductile Casting with finished process The Best Solutions for your assembly goods!

2. Iron & Ductile Casting Line (Automatic) or we can use V-Process Line for for the better surface finish. The best quality and the reasonable prices are waiting for your order!! Shot Blast Molding Casting

3. The Better Surface !! The Better Quality !! V-Process Line 1. Pattern Pattern Plate is placed on the suction box. Vent holes are made through pattern to the cavity of suction box. 2. Film Heating Thin(0.06-0.125mm) EVA film with high elongation and plastic deformation ability is heated and softened by heater. 3. Film Forming Softened plastic film is drawn tightly around the pattern by suction applied through vent holes. 4. Mold Washing Mold coating (refractory filler solvent) is sprayed on the film. 5. Flask Setting Flask is placed on to the film – covered pattern. Flask walls have suction chambers with suction filter pipes connected to them. Shot Blast 6. Sand Filling Flask is filled with fineness – controlled, dried and unbonded sand. Slight vibration compacts sand. Then back of the mold is scrapped. V-Processor 7. Film Sealing Back of the mold is covered with unheated thin (0.02~0.05mm) PE film 9. Pouring Cope and drag molds are assembled together. During pouring, the mold is kept under suction. 8. Pattern Striping Suction is applied into the flask. Then atmospheric pressure hardens the mold. When the mold is stripping from the pattern, suction is released by air-introducing into the chamber of suction box. 10. Releasing The molding sand flows away from the casting easily when suction is released. Return sand is cooled for reuse.

4. Various Experience in the field of Automobile • Customers : • Hyundai Motor Company • Kia Motors • Hyundai Heavy Industries & Machinery Co. Ltd. • Daewoo Heavy Industries & Machinery Ltd. • Halla Climate Control Corporation • LG Industrial System • GKN Automotive • Javico LTD. • The Victaulic Co., of Japan LTD.

5. Various Experience in the field of Forklift Kang Han Corporation is currently producing many kinds of parts including Axel Beams & Knuckles for Heavy Industry. We produce a variety of heavy equipment, which can weigh up to 5 tons.

6. Various Experience in the field of Robot Parts We meet the requirements of high quality cast-iron materials, which are needed in the high-tech robot industry. Thus, Kang Han’s goods have neat surface and precision, coordinating with the newly rising robot industry. Moreover, Kang Han fulfils the desire of customers in this area.

7. Various Experience in the field of Gas Control Industry Pneumatic, Gas, Oil, and Water Industry always concern the voids and porosities to avoid leak Problems. Kang Han Co. has a lot of experience to control the porosities & voids. Also to prevent the corrosion Kang Han has some good finished process as zinc phosphate, etc. To prevent invisible porosities Kang Han serves some good finished process as impregnation. For more service please do not hesitate to ask our facilities to solve the problems.

8. Just contact! The best is waiting for you! Just Feel The Better Quality with The Better Price. When you are competing, the prime cost & the quality can give you the better opportunity. Kang Han’s basic motto is ‘make our buyers be rich’! Just feel the differences that we have. Head Office (Seoul Office) Addr : 2F, 83-17, Hwakok-5Dong, Gangseo-Gu, Seoul, Korea Tel : +82 2 2691 1063 Fax : +82 2 2691 1068 Kimpo Machining Factory 1(named by Kang Han Precision Co.) – 100% owned by KH Kimpo Machining Factory 2(named by Uhram Precision Co.) – 100% owned by KH Inchon Iron Casting Factory (named by Shinwon Iron Co.) – half owned by KH Inchon Steel Investment (named by Sundo Metal Co.) – half owned by KH Other Kang Han’s Divisions : Please contact the Seoul Office