1 / 10

Cryogenics for FPP S. Masi

Cryogenics for FPP S. Masi. Two inter-related issues: Cryogenic chain for the focal plane (final temperature 0.1K) Thermal system to radiatively cool the telescope (final Temperature as low as possible, hopefully 30K).

tex
Télécharger la présentation

Cryogenics for FPP S. Masi

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cryogenics for FPPS. Masi • Two inter-related issues: • Cryogenic chain for the focal plane (final temperature 0.1K) • Thermal system to radiatively cool the telescope (final Temperature as low as possible, hopefully 30K)

  2. Possible Dry Cryogenic Chain for FPP focal plane (Replicate Planck, 2 years lifetime) Radiative cooling to <50K With V-grooves FLOWN RAL Sorption Cooler Grenoble dilution (open cycle) Planck JT cooler (10M€) FLOWN FLOWN (16M€) 20K -> 4.5K P.S. 70W @ 300K Load 300 mW @ 20K Heat lift 14mW @4.5K 4.5K -> 0.1K P.S. - Load 2 mW @ 4.5K Heat lift 0.1uW @0.1K FLOWN (??M€)

  3. Possible Dry Cryogenic Chain for FPP focal plane (2 years) Partial replication of Planck, but simpler 20K system RAL PULSE TUBE Air-Liquide + CEA/SBT + Thales Cryogenics BV Grenoble dilution (open cycle) Planck JT cooler (10M€) SPACE QUALIFIED (??M€) FLOWN FLOWN (16M€) http://www.dta.airliquide.com/en/our-offer/space/equipments/cryo-refroidisseurs-tube-a-gaz-pulse-10-k-80-k.html 300K -> 20K P.S. 200W @ 300K Heat lift 5W @ 80K Heat lift 300mW @20K 20K -> 4.5K P.S. 70W @ 300K Load 300 mW @ 20K Heat lift 14mW @4.5K 4.5K -> 0.1K P.S. - Load 2 mW @ 4.5K Heat lift 0.1uW @0.1K

  4. Alternative Dry Cryogenic Chain for FPP focal plane (>4 years) RAL PULSE TUBE Air-Liquide + CEA/SBT + Thales Cryogenics BV Planck JT cooler Continuous ADR 4 stage (NASA-GSFC) 8 kg SPACE QUALIFIED (??M€) FLOWN (16M€) http://www.dta.airliquide.com/en/our-offer/space/equipments/cryo-refroidisseurs-tube-a-gaz-pulse-10-k-80-k.html TRL2-3 (??M€) 20K -> 4.5K P.S. 70W @ 300K Load 300 mW @ 20K Heat lift 14mW out @1.6K 300K -> 20K P.S. 200W @ 300K Heat lift 5W @ 80K Heat lift 300mW @20K 6K -> 0.1K P.S. - Load 35 mW @ 4.5K Heat lift 30 uW @0.1K

  5. Alternative Dry Cryogenic Chain for FPP focal plane (>4 years) RAL PULSE TUBE Planck JT cooler Air-Liquide + CEA/SBT + Thales Cryogenics BV FLOWN Continuous Dilution (Grenoble) 20K -> 4.5K SPACE QUALIFIED http://www.dta.airliquide.com/en/our-offer/space/equipments/cryo-refroidisseurs-tube-a-gaz-pulse-10-k-80-k.html Lab Tests done: TRL2-3 Sorption or JT Cooler 4.5K -> 1.6K 300K -> 20K P.S. 200W @ 300K Heat lift 5W @ 80K Heat lift 300mW @20K 1.6K -> 0.1K P.S. - Load ? mW @ 1.6K Heat lift 1uW @0.05K FLOWN, to be modified

  6. Radiative cooling of telescope • Would the telescope be thermally disconnected from the spacecraft, it would cool down radiatively: • A mass of 400 Kg of Al with a 3m2 surface blackbody radiating to cold space would get to 4 K in 44 days (more or less the cruise to L2). • The key is then to limit the heat transfer from the spacecraft and from the sun, earth, etc. • Planck did it very well using V.grooves to limit radiation, low conductivity struts and pipes. • We might be able to do better with FPP: • Little power dissipation from detectors • Lower number of pipes / Waveguides • Use of Passive Orbital Disconnecting Struts (PODS) • Use of part of the 20K pulse tube cooling power (or a second, dedicated one) Telescope 30K or less Conductive heat transfer Radiative heat transfer Spacecraft 300K

  7. Spitzer: Gamma-alumina/epoxy composite struts (yellow) : Better than fiberglass (COBE) and Titanium struts.

  8. or gamma-alumina

  9. Mass Budget • TBD

  10. Heat Load Budget • On the 0.1K stage: • Superconduncting wiring for 200 (?) SQUIDs multiplexing 2000 detectors, + first stage SQUIDs dissipation (2 mW) • Supports for focal plane assembly (cold plate, horns, filters) • On the 4K stage: • Wiring for readout electronics • Support system to 20K stage • Load from 0.1K cooler • On the 20K stage • Load from support system to 30-40K radiatively cooled stage • Load from 4K cooler (300 mW) • On the 40K stage • Load from support system to 300K stage • Residual radiative load through V.grooves • Load from 20K cooler (partial)

More Related