1 / 12

FSAE Engine Control Unit

Project Description. An Engine Control UnitReads several input sensors from the engineGenerates outputs for Injectors and CoilsOur Project entailsSelecting appropriate electronic devicesDesigning and assembling a custom PCBWriting assembly routines to handle all engine statesPlacing the elec

thad
Télécharger la présentation

FSAE Engine Control Unit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. FSAE Engine Control Unit Ben Shelton Philip Ethier George Rossin

    2. Project Description An Engine Control Unit Reads several input sensors from the engine Generates outputs for Injectors and Coils Our Project entails Selecting appropriate electronic devices Designing and assembling a custom PCB Writing assembly routines to handle all engine states Placing the electronics in a heat resistant box Mounting the box on the Duke Motorsports Car Going Fast!

    4. Courtesy of Andrew Amazing Waterman Circuit Design PCB Layout Able to design custom components with PCB footprints! Schematic Capture / Auto-route DXP Software

    5. Accomplishments for Week Schematics Ben Ignition Coil and Injector Drivers Cam and Crank Sensor Conditioning Phil Signal Conditioning for 5 sensors (Manifold Air Pressure, Exhaust Oxygen, Coolant Temperature, Intake Temperature, Throttle Position) George PIC Microcontroller Flash Memory Module

    6. Selected Schematics

    7. PIC Microcontroller

    8. Crank and Cam Position Sensors

    9. Problems Encountered Learning curve with DXP Software Doesnt work on Vista? Surprise Surprise PIC runs at 3.3 volts, logic runs at 5 volts No PIC programmer? Where is it?

    10. Old GANTT

    11. New GANTT

    12. For the next 7 wonderful ones Check over schematics Place order for remaining components Design Preliminary PCB

    13. Questions?

More Related