1 / 6

Why CO2 is the Cooling Industry's Most Promising Refrigerant

Thar Process is the one-stop solution for you. CO2 serves as a natural working medium, which is a major direction for research on chlorofluorocarbons (CFCs). The fundamentals of CO2 refrigeration compressors, the distinctions between a CO2 compressor and other types of compressors, and the benefits of CO2 as a refrigerant will all be covered in this article. For more visit at: https://www.tharprocess.com/<br><br>

tharprocess
Télécharger la présentation

Why CO2 is the Cooling Industry's Most Promising Refrigerant

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Why CO2 is the Cooling Industry's Most Promising Refrigerant Water CO2 Equipment

  2. Low kinematic viscosity Low dynamic viscosity Small pressure ratio Small volume Large refrigerating capacity per unit volume High thermal conductivity High heat capacity at constant pressure Low surface tension The justification for CO2 use as a refrigerant

  3. High Efficiency Scroll compressor discharge and compression in this process are unidirectional and continuous. Due to the modest pressure difference between the two end-to-end chambers and the consequently reduced hazardous warming of suction gas, gas leakage is prevented.

  4. Minimum Vibration and Noise During the suction phase of a scroll compressor, the compression and exhaust are ongoing simultaneously. Since the pressure is rising gradually, the change in torque is quite minor; thus, vibration and noise are minimal. Scroll-type compressors rotate at a rate that is only one-tenth that of rotary compressors and returning compressors.

  5. Simple Structure and Small Volume The ratio of reciprocating compressors to CO2 scroll compressors in this process is 1:3:7. Additionally, scroll compressors' size was reduced by 40% in comparison to reacting compressors, and their weight was reduced by 15%. It uses regulators, has less brittle parts, has no suction, and is a flexible mechanism with adjustable axial. Additionally, a scroll compressor's radial clearance can stop many of the damages that the prospective liquid strike could cause.

  6. Contact Us www.tharprocess.com +1 (412) 968-0200

More Related