1 / 50

WDSS-II Training Module I

WDSS-II Training Module I. An overview of the WDSS-II display. What is WDSS-II?. Infrastructure to support application development, data ingest and distribution, configuration, and output data formats. Real-time and off-line data integration of data from multiple radars and other sensors.

thobson
Télécharger la présentation

WDSS-II Training Module I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WDSS-II Training Module I An overview of the WDSS-II display

  2. What is WDSS-II? • Infrastructureto support application development, data ingest and distribution, configuration, and output data formats. • Real-time and off-line data integration of data from multiple radars and other sensors. • Interactive 4D Display designed specifically to effectively manage and provide rapid access to the most important information for decision-making • Multi-sensor Algorithms to detect, diagnose and predict severe weather events.

  3. The WDSS-II display • The display is essentially just a GUI-based algorithm • Any data that can be viewed in the display may be accessed by any other algorithm!

  4. The WDSS-II display • The aim of this module is to present the underlying concepts. • The version of the display you are using may be different. • The display is constantly evolving in response to user feedback and requirements • The knobology may be different • Try to perform the steps as you go through this presentation

  5. Operating systems • Red Hat Enterprise 3 and 4 • Windows XP (display only)

  6. Starting up rssd • “rssd” runs as a daemon that controls: • product notification (lets processes know that a new product is available to fetch) • Data transfer between machines • Step 1: configure .rssd.conf • Step 2: type “rssd” at command-prompt • It should run until you reboot the machine – no need to start it every time • Environment variable RMTPORT to set port • Set RMTPORT to 50000 within NSSL

  7. Starting up rssd Edit .rssd.conf (in your home directory) Client: 172.16.*.* Client: 172.18.*.* Path: /tmp Path: /data • “Client” tells which computers are allowed to connect to this one • “Path” tells which directories they are allowed to browse • No need to include subdirectories (.e.g. /data/may3) if their containing dir is in the path.

  8. rssd for multiple users • If you have multiple users on the same machine: • set RMTPORT to /tmp:50000 • Can use any directory that is world-writeable

  9. Starting up wg (the WDSS-II GUI) • % wg –c myConfigFileName • Starts the WDSSII GUI. Saves your session upon exit in myConfigFileName • Also, loads the old session from myConfigfileName on startup. • You can save multiple configurations (e.g. different settings for archived cases or real-time) • % wg • Starts the WDSSII GUI • Uses a default configuration file “.wgpref” • Add “--verbose” to the command line to help diagnose run-time errors.

  10. Wg Layout • Each tab (left) controls a different functionality: • Control loaded products • Controls for camera / readout / etc. • Maps • Connect to and manage data sources

  11. Connecting to a real-time data source • At NSSL, there are a number of real-time data sources that can be connected to very simply: • Click: “Sources” / “Add”

  12. Connecting to a real-time data source machine Path to the index • Click on the data source of interest • Set the history (next slide) • Click “add”

  13. Connecting to a real-time data source: setting the history • “History” is how many minutes (default = 30) that will be maintained in the index from the most recent time. • Having a long history (e.g. “All”) can slow down initial connection times and use more memory – use only for archived cases. • For real-time data, use an amount of time greater than the length of time you expect to loop.

  14. Connecting to a real-time data source: additional notes • An index of existing real-time data sources may be listed in an XML file and used as your default selections in the sources page (see tensor:rindex.xml) • May be changed in the “preferences” dialogue • Real-time system status page: • http://tensor/cgi-bin/rupdate/radarUpdate.pl?group=REALTIME • Or just visit the tensor web site and click on “WDSSII Real-time Radar Status”

  15. Connecting to an existing archive data source • Give the source a name • Enter the location of the index file • Select the protocol (next slide) • Set the history to “all”

  16. Data sources: index protocols Indices are lists of data products and where they are located (local or remote). WDSSII natively supports three index protocols: • xmllb – a “linear buffer” file • Allows for real-time notification of new products • Has a limited number of records (~ 32000) • xml – a text index file • orpg – an index of ORPG products • Additional types may be added as plug-ins.

  17. Sources: Loading a product • This is a product list for each source. • Single click on the product will open up “category” menu • Double click on product will load the product in the first category • Click on a time will load the product at that time

  18. Sources: Other notes • You can delete a source completely if you are finished with it. • If not using a source, disconnecting may speed things up on a slower computer or network. • If a real-time source stops updating, then try reconnecting. • Change the history time by clicking here.

  19. Viewing multiple products in one window • Two or more image products from the same source cannot be viewed in the same window – one will always be in front. This is configrable • Images from two different sources may be overlaid on each other: • Use hide / only to avoid confusion • The highlighted product in the product selection tab will always be in front

  20. Viewing multiple products in one window Notes on time: • If browsing backward in time, the highlighted product is considered most recent – newer data from other sources will not be displayed • In Auto Update mode, simulation time is the most recent product from any source

  21. Viewing multiple products in one window Controlling the product view: Don’t show the highlighted product Show only the highlighted product highlighted product

  22. Real-time: Auto update • Auto Update: listen for new products on an LB an automatically update to the latest one. • Stepping backward in time will turn off Auto Update • Can use auto-update when doing playback (w2simulator) also

  23. Looping products • Turn on a loop for the current window • Looping controls are found under Options / Preferences

  24. Color Key • Turns on the color bar for all products in this window • Can be edited (more on this in a later session)

  25. Navigating a multi-slice product Green = current volume scan Red = previous volume scan Step forward in time Step back in time Step to most recent time Browse up/down in “virtual volume” (most recent slices) – this is how most WDSS-II algorithms operate Browse up/down in current volume

  26. Multiple windows • Controlled by “view” in top menu bar • “New Window”: adds an empty new window • “Set Main Window”: choose which window is attached to the controls at the bottom • “Main Window” / “All windows”: turn on/off auto update, auto snapshot, and color key

  27. Multiple windows: View Tiled Tiled without controls Right side

  28. Navigation: mouse controls • Pan: left mouse, move in direction desired • Zoom: middle mouse, move up or down • Pop-up menu: right mouse

  29. Right mouse pop-up menu • Swap with main window: put this one in the main window spot and connect to controls • Set product / time / subtype / Auto update / Loop / Show Color Key / Show readout-- set these items for this window • Group: sync with other window • Rename: name this window • Take snapshot • Delete this window

  30. Sync Group • Put multiple windows in the same sync group” to make them pan / zoom / tilt / time match, etc. • Flexible, exact synchronization types are controlled under the preferences window

  31. Auto Snapshot • Take a snapshot each time a new product appears • Controlled by preferences • May be used to automatically generate static images, e.g. for putting on the web

  32. Options menu (top bar) • Data readout options: • Raw value • Lat / Lon • Azimuth / Range (polar only) • Height MSL and Above Radar Level • Preferences

  33. Options / Preferences / Windows • Each Sync group may be loosely or complexly coupled

  34. Options / Preferences / Snapshot • Filename naming convention: • %p = product name and subtype • %t = time • %c = count • Use as an alternative to %t • Simplifies scripts • Snapshots are what’s visible in window • Same size as window • Unless “custom size”

  35. Options / Preferences / Readout • Same as options menu • English / Metric – controls for data readout as well as tables, range rings, etc.

  36. Options / Preferences / Display • Font size for icons, text • Dynamic slice: increase value for higher resolution. This may slow down machines with limited graphic memory. • Level of Detail culling: keep only the most important icons as you zoom out.

  37. Options / Preferences / Cache • Cache: purely memory-dependent.  Products are not preloaded into the cache.  If you like lots of history or lots of products, use a bigger cache.  Check memory usage with "top" and compare to your machine's memory • Clear Color Maps if you edited one of them

  38. Options / Preferences / Paths • Path to real-time index location • This is where the list of sources for “Sources / Add” come from. • Can create similar file on your machine • Can collaborate with others in lab • machine:path-to-xml • Can have multiple • Separate using ;

  39. Options / Preferences / Loop • Set the looping parameters • The bar at the top gives a visual of how the loop will behave

  40. Dynamic cross section / CAPPI • To begin: choose “Create” / “Dynamic Slice or CAPPI” on the product navigation menu • Any 3D data field (polar or Lat/Lon) may be used as input

  41. Dynamic cross section / CAPPI • Click create again and draw a line with left mouse • Click “Reset” to start from scratch

  42. Dynamic cross section / CAPPI • Dynamically drag the small boxes to change the cross section: • Middle box: move cross section • 2nd / 4th boxes: rotate cross section • End boxes: move only this end, keeping the other fixed

  43. Dynamic cross section / CAPPI • Choose “CAPPI” and draw a box with left mouse for a constant-altitude plot • Middle blue bar or shift-middle controls altitude • Note altitude at top

  44. Dynamic cross section / CAPPI • Shift-left mouse controls tilt • Click “plan view” to go back to zenith viewing angle

  45. Dynamic cross section / CAPPI • Turn off interpolation to see original data field

  46. B-scan (table readout) • Check “table” in the navigation pane to bring up a table of raw data values

  47. Tables, Trends, and Icons point data (such as cell centroids, rain gauges, etc) are stored in tables.

  48. Tables, Trends, and Icons Two table types: • Pop-up window • Inview

  49. Tables, Trends, and Icons Features: • Past tracks • Icons (w/ height poles for 3D view) • Trends • Table sort

  50. End of WDSS-II Training Module I

More Related