1 / 9

CRS internal measurement checking gauge

CRS-23-03. CRS internal measurement checking gauge. Annex 19 . Erik Salters, Dorel Safety Research Department . EN1888 device. Origin not clear, EN1888 secretary does not know. Not intended to represent <1 yr old children.

tillie
Télécharger la présentation

CRS internal measurement checking gauge

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CRS-23-03 CRS internal measurement checking gauge Annex 19 Erik Salters, Dorel Safety Research Department

  2. EN1888 device • Origin not clear, EN1888 secretary does not know. Not intended to represent <1 yr old children. • Mass is 9 kg, so too heavy for children with a stature smaller then ~600 mm. • Width is 200mm, so too wide for children with a stature smaller then ~750 mm • Chosen to design our own device.

  3. Input • Where possible, body parts were made adjustable to represent children with a stature from 400-1500 mm • Where not possible, Q1,5 was used as reference (e.g. hip joint location) • Upr arm ball diameter 44 mm • Shoulder rotation point from backrest 50 mm • Hip joint height from seating plane 36 mm • Hip joint distance from backrest 60 mm • Buttock radius 45 mm • Thigh thickness 60 mm • 50 N spring force in hip and shoulder cups.

  4. Backrest length Shoulder width Hip Width

  5. Hip width device Top view Isometric view with shell

  6. Shoulder width device Top view Isometric view with shell

  7. Isometric view with half CRS shell

  8. Ranges400-1500 mm (0 to ~12yrs) Backrest height 400-800 mm Shoulder breadth 120-400 mm Hip breadth 150-400 mm Shoulder height 250-550 mm

  9. Open issues • Naked dummy; 5 mm compensation for clothing proposes (all directions). • Verification of shoulder height is OK; belt length check is not required. • Non sizable measures, might need adjustment for Q0 sized child • Leg diameter • Shoulder backrest distance • Diameter of hip + shoulder cups Is it really a problem? Legs are only a few mm’s too thick, shoulder a few mm’s too far from backrest. to represent a newborn. Hip + shoulder Ø are equal in Q dummies (realistic?)

More Related