1 / 19

Overview of FDA Device Regulations

Overview of FDA Device Regulations. Bob Assenzo Critical Path Institute bassenzo@c-path.org. Overview of FDA Device Regulations - Outline. Introduction Establishment Registration – 21 CFR 807 Medical Device Listing – 21 CFR 805 Premarket Notification 510(k) – 21 CFR 807 Subpart E

tolla
Télécharger la présentation

Overview of FDA Device Regulations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Overview of FDA Device Regulations Bob Assenzo Critical Path Institute bassenzo@c-path.org

  2. Overview of FDA Device Regulations - Outline • Introduction • Establishment Registration – 21 CFR 807 • Medical Device Listing – 21 CFR 805 • Premarket Notification 510(k) – 21 CFR 807 Subpart E • Premarket Approval (PMA) – 21 CFR 814

  3. Overview of FDA Device Regulations – Outline (cont.) • Investigational Device Exemption (IDE) – 21 CFR 812 • Quality System Regulation (QS)/Good Manufacturing Practices (GMP) – 21 CFR 820 • Labeling – 21 CFR 801 • Medical Device Reporting – 21 CFR 803

  4. Introduction to Device Regulations • FDA’s Center for Devices & Radiological Health (CDRH) is responsible for regulating firms that manufacture, repackage, relabel, and/or import medical devices sold in the US. • Additionally, CDRH regulates radiation-emitting electronic products (medical & non-medical) such as lasers, x-ray systems, ultrasound equipment, microwave ovens & color TVs

  5. Introduction to Device RegulationsClassifications • Medical devices are classified into Class I, II, and III. Regulatory control increases from Class I to III. • The device classification defines the regulatory requirements for a general device type.

  6. Introduction to Device RegulationsClassifications (cont.) • Most Class I devices are exempt from Premarket Notification 510(k) • Most Class II devices require Premarket Notification 510(k) • Most Class III devices require Premarket Approval • For classification determination see: www.fda.gov/cdrh/devadvice/313.html

  7. Device Classification Panels • Most medical devices can be found in 21 CFR 862 – 893 • FDA has classified and described over 1,700 distinct types and organized them into 16 medical specialty panels, e.g. 870 is cardiovascular; 886 is ophthalmic • The CFR gives a general description, use, class, and info about marketing requirements • www.fda.gov/cdrh/devadvice/3131.html

  8. Introduction to Device RegulationsBasic Requirements • Establishment registration • Medical Device Listing • Premarket Notification 510(k), unless exempt, or Premarket Approval (PMA) • Investigational Device Exemption (IDE) for clinical studies • Quality System (QS) regulation • Labeling requirements • Medical Device Reporting (MDR)

  9. Establishment Registration – 21 CFR Part 807 • Manufacturers, domestic & foreign, and initial distributors (importers) of medical devices must register their establishments with the FDA. • All establishment registrations must be submitted electronically, unless FDA grants a waiver • All registration information must be verified annually (Oct 1-Dec 31) • Foreign manufacturers also must designate a US agent • Most establishments are required to pay an establishment registration fee

  10. Medical Device Listing – 21 CFR Part 807 • Manufacturers must list their devices with the FDA. Establishments required to list: • Manufacturers • Contract manufacturers that commercially distribute the device • Repackagers and relabelers • Specification developers • Reprocessors single-use devices • Remanufacturer • Manufacturers of accessories and components sold directly to the end user • US manufacturers of “export only” devices

  11. Premarket Notification 510(k) –21 CFR Part 807 Subpart E • If device requires the submission of a Premarket Notification 510(k), it cannot be commercially distributed until an authorizing letter of substantial equivalence from FDA is received • A 510(k) must demonstrate that the device is substantially equivalent to one legally in commercial distribution in the US: (1) before May 28, 1976, or (2) to a device that has been determined by FDA to be substantially equivalent • www.fda.gov/cdrh/devadvice/314.html

  12. Premarket Notification 510(k) –21 CFR Part 807 Subpart E (cont) • The Medical Device User Fee and Modernization Act of 2002 authorizes FDA to charge a fee for medical device Premarket Notification 510(k) reviews. • Most Class I and some Class II devices are exempt from the Premarket Notification 510(k) submission. See • www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpcd/315.cfm

  13. Premarket Notification 510(k) –21 CFR Part 807 Subpart E (cont) • Review by Accredited Persons: • FDA has accredited 12 organizations to conduct a primary review of 670 types of devices. • FDA must issue a final determination within 30 days after receiving a recommendation from an Accredited Person • Accredited Person is exempt from any FDA fee; the third party may charge a fee for its review

  14. Premarket Approval (PMA) –21 CFR Part 814 • Products requiring PMAs are Class III devices that are high risk devices that pose a significant risk of illness or injury, or devices found not substantially equivalent to Class I & II predicate through the 510(k) process (Fee required) • The PMA process is more involved and includes the submission of clinical data to support claims made for the device • See www.fda.gov/cdrh/devadvice/pma/

  15. Investigational Device Exemption (IDE) – 21 CFR Part 812 • An IDE allows the investigational device to be used in a clinical study to collect safety & effectiveness data required to support a PMA application or a Premarket Notification 510(k) submission to FDA. • Clinical studies of devices with significant risk must be approved by FDA and an IRB before study can begin • Studies of devices of nonsignificant risk must be approved by the IRB before study can begin • See www.fda.gov/cdrh/devadvice/ide/index.shtml

  16. Quality System Regulation (QS)/Good Manufacturing Practices (GMP) – 21 CFR Part 820 • The quality system regulation includes requirements related to the methods used in and the facilities and controls used for: designing, purchasing, manufacturing, packaging, labeling, storing, installing and servicing of medical devices • Manufacturing facilities undergo FDA inspections to assure compliance with the QS requirements • See www.fda.gov/cdrh/devadvice/32.html

  17. Labeling – 21 CFR Part 801 • Labeling includes labels on the device as well as descriptive and informational literature that accompanies the device • www.fda.gov/cdrh/devadvice/33.html

  18. Medical Device Reporting –21 CFR Part 803 • Incidents in which a device may have caused or contributed to a death or serious injury must be reported to the FDA • Certain malfunctions also must be reported • The MDR regulation is a mechanism for identifying and monitoring significant Aes • www.fda.gov/cdrh/devadvice/351.html

  19. Guidance Documents • Good Guidance Practice (GGP) relate to: • The processing, content, and evaluation of regulatory submissions • The design, production, manufacturing, and testing of regulated products • The inspection and enforcement procedures • www.fda.gov/cdrh/guidance-about.html

More Related