1 / 28

Colligative Properties

Colligative Properties. Vapour pressure Boiling point Freezing point Osmotic pressure. Physical vs Chemical. Mixing is physical process; chemical properties don’t change Properties of solutions are similar to those of the pure substances

tom
Télécharger la présentation

Colligative Properties

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Colligative Properties Vapour pressure Boiling point Freezing point Osmotic pressure

  2. Physical vs Chemical • Mixing is physical process; chemical properties don’t change • Properties of solutions are similar to those of the pure substances • Addition of a foreign substance to water alters the properties slightly

  3. Colligative: particles are particles • Colligative comes from colligate – to tie together • Colligative properties have common origin • Colligative properties depend on amount of solute but do not depend on its chemical identity • Solute particles exert their effect merely by being rather than doing • The effect is the same for all solutes

  4. Colligative properties for nonvolatile solutes: Take it to the bank • Vapour pressure is always lower • Boiling point is always higher • Freezing point is always lower • Osmotic pressure drives solvent from lower concentration to higher concentration

  5. Counting sheep (particles) • The influence of the solute depends only on the number of particles • Molecular and ionic compounds will produce different numbers of particles per mole of substance • 1 mole of a molecular solid → 1 mole of particles • 1 mole of NaCl → 2 moles of particles • 1 mole of CaCl2 → 3 moles of particles

  6. Solution Deviants • Like ideal gas law, Raoult’s Law works for an ideal solution • Real solutions deviate from the ideal • Concentration gets larger • Solute – solvent interactions are unequal • Solvent – solvent interactions are stronger than the solute – solvent: Pvap is higher • Solvent – solute interactions are stronger than solvent – solvent interactions: Pvap is lower

  7. CFU 1 • What does non volatile mean? • Which non volatile solute • NaCl or Glucose • Would have the have the most impact on vapor pressure? • Which would have the most impact on Boiling point? • If you add 1 mole of NaCl to 100g grams of water what is the Molality • What is the difference between molality and Molarity

  8. CFU 1 • If you add 1 mole of NaCl to 100g grams of water what is the Molality • What is the difference between molality and Molarity

  9. CFU 2 • What is a nonelectrolyte? • What is meant by aqueous? • What is the value of Kb for water? • What is the value of Kf for water?

  10. CFU 2 • What would be the boiling point and freezing point of a 0.625m aqueous solution of any nonvolatile, nonelectrolyte solute? • non electrolyte means VHF of 1 • ΔTf = VHF x m x Kf • = 1 x 0.625 x -1.86 • = -1.1625Freezing point = 0 -1.1625 • ΔTb = VHF x m x Kb • = 1 x 0.625 x +0.52 • = 0.325 Boiling point = 100 +0.325 = 100.325oC

  11. Liquid

  12. What is the molality of a solution with a boiling temperature of 101.56°C? (The Molal boiling point elevation constant for water is 0.52ºC•m – 1) A) 1m B) 2m C) 3m D) 4m E) 195m • ΔTb = VHF x m x Kb • 1.56 = 1 x m x +0.52 • m = 1.56 = 3 1 x 0.52

  13. Incomplete dissociation • Not all ionic substances dissociate completely • Van’t Hoff factor accounts for this Van’ t Hoff factor: i = moles of particles in soln/moles of solute dissolved

  14. Riding high on a deep depression • Blue curves are phase boundaries for pure solvent • Red curves are phase boundaries for solvent in solution • Freezing point depression • Pure solid separates out at freezing – negative ΔTf • Boiling point elevation • Vapour pressure in solution is lower, so higher temperature is required to reach atmospheric – positive ΔTb

  15. Magnitude of elevation • Depends on the number of particles present • Concentration is measured in molality (independent of T) • Kb is the molal boiling point elevation constant • Note: it is the number of particles

  16. Magnitude of depression • Analagous to boiling point, the freezing point depression is proportional to the molal concentration of solute particles • For solutes which are not completely dissociated, the van’t Hoff factor is applied to modify m:

  17. Osmosis: molecular discrimination • A semi-permeable membrane discriminates on the basis of molecular type • Solvent molecules pass through • Large molecules or ions are blocked • Solvent molecules will pass from a place of lower solute concentration to higher concentration to achieve equilibrium

  18. Osmotic pressure • Solvent passes into more conc solution increasing its volume • The passage of the solvent can be prevented by application of a pressure • The pressure to prevent transport is the osmotic pressure

  19. Calculating osmotic pressure • The ideal gas law states • But n/V = M and so • Where M is the molar concentration of particles and Π is the osmotic pressure • Note: molarity is used not molality

  20. Osmotic pressure and molecular mass • Molar mass can be computed from any of the colligative properties • Osmotic pressure provides the most accurate determination because of the magnitude of Π • 0.0200 M solution of glucose exerts an osmotic pressure of 374.2 mm Hg but a freezing point depression of only 0.02ºC

  21. Determining molar mass • A solution contains 20.0 mg insulin in 5.00 ml develops an osmotic pressure of 12.5 mm Hg at 300 K

  22. Moles insulin = MxV = 3.34x10-6 mol • Molar mass = mass of insulin/moles of insulin = 0.0200 g/3.34x10-6 mol = 5990 g/mol

  23. Volatile solute: two liquids • Total pressure is the sum of the pressures of the two components

  24. Ideal behaviour of liquid mixture • Total pressure in a mixture of toluene (b.p. = 110.6ºC) and benzene (b.p. = 80.1ºC) equals sum of vapor pressures of components

  25. Deviations from ideal • Real solutions can deviate from the ideal: • Positive (Pvap > ideal) solute-solvent interactions weaker • Negative (Pvap < ideal) solute-solvent interactions stronger

  26. Fractional distillation: separation of liquids with different boiling points • The vapour above a liquid is richer in the more volatile component • Boiling the mixture will give a distillate more concentrated in the volatile component • The residue will be richer in the less volatile component

  27. Purification in stages • A 50:50 mixture produces a vapour with a 71:29 composition • That mixture boiled produces a vapour with a 86:14 composition • That mixture boiled produces a vapour with a composition 94:6

  28. The practice of fractional distillation • In practice, it is not necessary to do the distillation in individual steps • The vapour rising up the column condenses and re-evaporates continuously, progressively becoming enriched in the volatile component higher up the tube • If the column is high enough, pure liquid will be collected in the receiver

More Related