1 / 18

I nvestigating the C omposition of E nceladus via

I nvestigating the C omposition of E nceladus via. P rimary L ander and U nderwater M icroorganism E xplorer. Alex Gonring, Capri Pearson, Sam Robinson, Jake Rohrig, & Tyler Van Fossen University of Wisconsin - Madison. ICEPLUME Mission Overview. Aeroshell.

ulric
Télécharger la présentation

I nvestigating the C omposition of E nceladus via

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. I nvestigatingtheC ompositionofE nceladusvia P rimaryL anderandU nderwaterM icroorganismE xplorer Alex Gonring, Capri Pearson, Sam Robinson, Jake Rohrig, & Tyler Van Fossen University of Wisconsin - Madison

  2. ICEPLUME Mission Overview Aeroshell Solar Electric Propulsion (SEP) Module Lander with Probe Inside Orbiter

  3. Saturn’s moon Enceladus shows unique characteristics. • Recent geological activity • Warm South Pole • Plume contributes to E-Ring • “Tiger Stripes” supply fresh ice • Fundamental needs for life • Water (Cassini measured 90%) • C H N O basic elements • Energy source • Astrobiology may exist on Enceladus 500 km

  4. Solar Electric Propulsion and Gravity Assists will provide the initial ΔV to Saturn. Ø 40 cm 8 m The 61.2 m2 solar arrays provide 27.6 kW to power the 5 NEXT thrusters. 2 m

  5. The Ultraflex solar panels provide power and xenon fuels the ion thrusters. AdvancedStirling Radioisotope Generators operate the instruments on the orbiter. Ultraflex solar panels 0.725 m Power processing unit ASRG Xenon tank

  6. An aeroshell is required for atmospheric entry during aero-gravity assist. Solar Electric Propulsion with aerocapture provides ~ 2.4x more mass delivered to final destination (~ 500 kg) Added complexities: 1) RCS thrusters for trajectory alignment 3) Payload configuration within volumetric constraint 2) Heat shield for thermal protection (~1500° C, 99% KE) MSL (Ø 4.5m) Orion heat shield (Ø 5m) ICEPLUME (Ø 5.0 m)

  7. Low-density materials are required to minimize aeroshell mass. Separation Plane Backshell • Structural Material: • graphite polycyanate composite • Aeroshell: 2.6 cm molded honeycomb • Framework: 1.6 cm isogrid • Face Sheets: 2 mm thick sheet 2.5 m Rib Longeron Thermal Protection Materials: ** 14-31% improvement on heritage aerial densities RCS Jets • PhenCarb-20 (500 W/cm2) • SRAM-20 (260 W/cm2) • SRAM-17 (210 W/cm2) • SRAM-14 (150 W/cm2) • Acusil II (100 W/cm2)

  8. 10X Separation Mechanism Ten separation mechanisms split the aeroshell and deploy the orbiter after aero-assist. • Requirements: • Permits rotation • Allows compression • Primarily Ti 6AI-4V Separation Nut Spherical Bearing Separation Bolt Separation Plane 3 m 6 in Compression Spring • ** Based on the Mars Science • Laboratory (MSL) design Bolt Extractor

  9. Multiple propulsion systems are needed to accomplish our mission. • System uses separate monopropellant and bipropellant propulsion modules • Monopropellant module will use 132 kg of hydrazine (N2H4) and 0.9 N thrusters for attitude control in conjunction with reaction wheels • Bipropellant module will use 3000 kg of monomethylhydrazine (MMH) for fuel and nitrogen tetroxide (NTO) for oxidizer

  10. The monopropellant system is used for attitude control and fine course corrections. Ø 0.128 m • Helium Recharge Tank • Used for a single-time recharge of the monopropellant system • Holds 0.4 kg of He 0.85 m • Monopropellant Tank • Purchased from Pressure Systems Inc. • Initial pressure 2.34 MPa (340 psi) • Holds 132 kg of Hydrazine • Thruster Clusters • 1 N thrusters purchased from Astrium • 8 clusters of 4 thrusters are placed on the top and bottom of the payload deck 270 mm 270 mm

  11. The bipropellant system is used for trajectory correction maneuvers. 0.96 m • Helium Pressurization Tank • Backfills He into oxidizer and bipropellant tanks to maintain pressure • Initial pressure 23.7 MPa Holds 8.6 kg of He 1.5 m • Oxidizer and Bipropellant Tanks • Pressurized to 689.4 kPa(100 psi) • Holds 1131 kg of fuel and 1869 kg of oxidizer • Booster Assembly • R-4D rocket engine by Aerojet • 490 N (110 lbf) nominal thrust • Gimbal up to 37° in all directions 0.9 m

  12. Science instruments similar to the Cassini mission will explore mission goals.

  13. The orbiter contains multiple communication systems. • Radio frequency subsystem with antennas provide communication for the orbiter to and from Earth. • High-gain Antenna (HGA) • Support communication with Earth while in orbit about Enceladus • S-band Probe/Lander communication • Two Low-gain Antennas (LGA) • Support communication with Earth during transit

  14. The orbiter’s structure is constructed primarily of a composite payload deck. 4.4 m 4.4 m 3.5 m 1.8 m 2.27 m 6.23 m 6.2 m 1.8 m • HGA Structural Material: • 6061-T6 aluminum I beams • 6061-T6 angle brackets • 7075-T73 aluminum sheet • Payload Deck Structural Material: • graphite polycyanate composite • Deck Panels: 2 cm isogrid • Face Sheets: 1.6 mm thick sheet 1.35m

  15. A majority of the total mass will be allotted towards payload delivery. Total Mass from LEO: 7559 kg

  16. The lander will be deployed from the back of the orbiter. • No aeroshell required • Heat flux value of (compared with ) • Lander held to orbiter with pyronuts • Deployed by expanding spring • Guided out on rails • 4X 22N descent thrusters • 16X 1N attitude thruster clusters • Radar 3.6m

  17. The main objective of the lander is to carry the probe to the surface. Science Instruments: Descent Camera Accelerometer Tiltmeter Seismometer Radar Low Gain Antenna 3.6 m Exploration Probe 12X 1N Attitude Thruster Clusters 12X 1N Attitude Thruster Clusters 22N Descent Thrusters Landing Feet Propellant Tanks (Monopropellant) Ø2.5 m

  18. Thank you! Questions?? The probe melts through 6.5 miles of ice in 1.5 years. IPPW-9 Staff & Student Organizing Committee University of Wisconsin Faculty and Staff Dr. Elder Prof. Hershkowitz Dr. Sandrik • Lander-probe separation mechanism (pyronuts) • Tether Bay houses tether for data relay • Science instruments (Chemical, mineral, thermal, magnetic, astrobiological measurements) • 2 GPHS-RTGs generate 100W electric power for instruments and 8600W thermal power to melt ice • Accelerometer, tiltmeter, water pump and jets 3.47 m

More Related