1 / 68

Training Agenda

Training Agenda. Features Review Hardware Overview Peripherals System Installation System Programming Remote Programming Hands-on. Features Review. Prime Product Review. Quick & easy device registration, each with a 16-character unique descriptor. 32 User codes

uri
Télécharger la présentation

Training Agenda

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Training Agenda • Features Review • Hardware Overview • Peripherals • System Installation • System Programming • Remote Programming • Hands-on

  2. Features Review

  3. Prime Product Review Quick & easy device registration, each with a 16-character unique descriptor • 32 User codes • 32 wireless and 1 hardwire zones • 19 Keyfobs • 4 Wireless keypads (1-way or 2-way) • 3 wired keypads • 1 Wireless siren (1-way or 2-way) • 4 Repeaters • 16 Smart keys • Arming Methods: Full, Part or Perimeter • Event Log: 256 event capacity

  4. Keypads Basic Functions

  5. Keypads Additional Functions

  6. Wireless Devices • Supervised wireless sensors send a supervision signal approximately one hour after their last transmission. • If the system does not receive supervision signals from a specific transmitter, the transmitter is regarded as inactive. • The amount of time after which a transmitter is considered inactive is called the Supervision Time. • From the Programming menu, select Devices, Superv. Time, General [9,1,6,1]. • Enter a supervision time between 04:00 and 23:59 hours. Supervision Time

  7. PC Connect Electronics line ‘Pc Connect’ module Connects the “Infinite prime” panel to a Pc using the ‘com’ port on the PC, and USB connector on the “Infinite Prime” panel. Allows easy firmware updates and local programming.

  8. Vocal Message Account Vocal Message Options • Feature that calls the user’s telephone number when specific events occur and plays pre-recorded messages. Programming these accounts’ phone numbers is done in menu [9,5,1]. Tip: This requires enabling which is done in menu [9,4,13]. • Additionally, in the event of an alarm, the user is able to establish a Two-Way Audio connection on receiving the vocal message in order to check the premises. Tip: This requires enabling which is also done in menu [9,5,1]. Home ID • The Home ID is a short message that is played at the beginning of a vocal message call in order to identify the system to the user. To record the message access menu [9,5,19,2]. • For example, “Adams House” shall be played before the event messages. To play the message access menu [9,5,19,1]. Message Center • The infinite prime Message Center is designed to allow the user to record a short message that may be played back later by another user. Play, Record and Delete menus [7,02,1]-[7,02,3].

  9. ExtraFeatures “No Arm” Indication • The “No Arm” indication is a feature designed to inform the central station that the system has not been armed for a specified period of time. From the Programming menu, select System Options, No Arm Ind. [9,4,09]. Select 1 Week, 2 Weeks, 3 Weeks, 4 Weeks or Disabled. RF Jamming • The system is able detect RF Jamming that is usually caused by an intruder attempting to compromise the security system. From the Programming menu, select System Options, Jamming Det. [9,4,10]. Select Enabled or Disabled. “No Motion” • The No Motion feature is designed to monitor the activity of disabled or elderly people. • If a sensor defined as “No Motion” has not detected within a pre-defined period of time, a No Motion event message is sent to the central station. From the Programming menu, select System Options, No Motion [9,4,11]. Select 6 Hours, 12 Hours, 24 Hours, 48 Hours, 72 Hours or Disabled.

  10. User Utilities - Two-Way Audio & Telecontrol Incoming Calls • Users may use this feature as a convenient way for contacting their family, operating their system or to check their home when they are away. Tip: For this feature to function, the Telecontrol User Code (#29) must be programmed. • Monitoring service can contact the user in the event of an emergency or use this feature for listen-in alarm verification. Tip: For this feature to function, the Central Station TWA User Code (#30) must be programmed. • For any of the incoming Telecontrol features to function, Telecontrol must be enabled in the Communication menu [9,5,4,10]. Outgoing Calls • The Service Call feature enables the user to establish a two-way audio connection with the central station operator. Tip: To program Service Call Phone Number access menu [9,5,3,1]. • In the event of Burglary, Fire and Medical alarms, the control panel is able to report the events and then stay on the line after ACK 2 is received. Tip: Two-Way Audio must be enabled for the specific account [9,5,1].

  11. User Utilities -Two-Way Audio & Telecontrol • Remote Arming/Disarming. • Cancel Siren Activation. • Infinite Interphone. An additional external microphone/speaker unit could be connected to the panel, with up to 60m cable.

  12. Telecontrol Call Procedure • Call the CP either using the double call method (PSTN) or directly (Cellular); when the control panel picks up, two DTMF tones are sounded. • Enter the Telecontrol code (Code 29) on your telephone within 15 seconds. • The following DTMF commands are available: • Press “2” for Two-Way Audio. If the TWA mode is defined as “Simplex” the audio channel opens in Listen mode (microphone active/speaker mute). To switch to Speak mode, press “1” on your telephone. To switch back to Listen mode, press “0” on your telephone. • Press “3” to fully arm the system. • Press “6” to disarm the system. • Press “9” to cancel the siren. • Ten seconds before the timeout expires, two short DTMF tones are sounded. To extend the call, press “7” on your telephone. This command restarts the timeout. • To disconnect before the end of the timeout, press “” then “#” on your telephone. Tip: The Central Station is not able to arm or disarm the panel using Telecontrol.

  13. User Utilities- SMS Commands • Remote Arming/Disarming via SMS • Each SMS command contains the following elements: • SMS Command Descriptor (up to 43 characters of free text) • # (delimiter – separates the descriptor from the actual command) • User Code (4 digits) • Command (120=Disarm, 121=Full Arm, 122=Part Arm, 123=Perimeter Arm, 124=Full + Perimeter Arm, 125=Part + Perimeter Arm, 200 = Arm Status) • The following example shows the format of an SMS command for arming the system. • On receiving an Arm Status request message, the system returns a status message to the sender. Tip: The SMS Command feature must be enabled in order for it to function. Menu [9,5,4,13,4]. Tip: The SMS Confirm feature must be enabled in order for the CP to reply. Menu [9,5,4,13,5].

  14. User Code Types Controlled/Non-controlled Codes When a controlled code used to Arm/Disarm the system the panel notifies the central station. The panel will send a message to the control station only if the code was used after an alarm occurrence. Limited Codes This feature enables the user to issue a code that is valid for 24hrs only. This code automatically expires 24hrs after it was issued. Duress Code Designed for situations when the user is being forced to operate the system. When the code is being used the panel sends a Duress event message to the central station.

  15. System Initialization Options • The Initialization function clears the entire system and resets factory defaults. Init All [9,7,1]. • For firmware versions that include multi-default and/or multi-language support, select the set of programming defaults and/or the required interface language that you want to load. • Loading the system’s default program enables you to restore the factory-set programming defaults. Load Defaults [9,7,2]. • Clear User Codes deletes all programmed user codes and restores the default Master and Installer codes. Clear Users [9,7,3]. • The Clear Wireless Transmitters function enables you to delete all registered transmitters at once. Clear Wireless [9,7,4]. • The Find Modules function runs a diagnostic test that identifies the modules and keypads that are connected to the system bus, enabling supervision for those modules. Find Modules [9,7,5].

  16. Home Automation Control – X10 Modules Control home appliance over existing wiring through system panel, keyfob, wireless remote control/keypad, or via SMS command. Control Entrance Lights Control Electric Stove Control Garage Door Control Electric Heater

  17. Home Automation X10 Control Modules

  18. Home Automation • Smart House control via SMS • Each SMS command contains the following elements: • SMS Command Descriptor (up to 43 characters of free text) • # (delimiter – separates the descriptor from the actual command) • User Code (4 digits) • Command (0=Off, 1=On) • Device Number (HA Units: 01-16) • The following example shows the format of an SMS command to switch on a water boiler controlled by HA unit 8. • The following example shows the confirmation message the sender receives. SMS Commands Tip: The SMS Command feature must be enabled in order for it to function. Menu [9,5,4,13,4]. Tip: The SMS Confirm feature must be enabled in order for the CP to reply. Menu [9,5,4,13,5].

  19. Home Automation The EL-2614 includes two buttons (B1 and B2) that you can program The default functions are as follows: B1:Part arming B2:Perimeter arming Select the HA unit you want the button to control (01-16) or enter 00 to program the button’s default function. Menu [912]. • The EL-2640 is a Remote Control keypad. Apart from the Arming/Disarming function it can be used to turn HA units on and off. To do so press on/off button and HA number. HA Off HA On

  20. Hardware Overview

  21. Prime - Hardware Layout • Main Board • PSTN dialer module • Home Automation module • GSM module • Backup Battery Pack (7.2V,1.5/1.8/2.5/3.0AH) • USB type Connector 2 3 6 4 1 5

  22. Prime Modules Main Module Tamper Switch Transmitter Holes Main CPU GSM Connector DC Converter AC Supply and fuse HA Connectors USB Connector PSTN Connector

  23. Prime Modules GSM Module GSM Engine SIM Card GSM Antenna Flat cable to main board

  24. Prime Modules PSTN Module Telephone and Line In connection Flat cable to main board

  25. Prime Modules GSM Module Data Connector AC Input

  26. Installing Hardwire LCD Keypads • The system supports up to three hardwire LCD keypads that may be installed up to 300m from the control panel. Flash Programming Connector LCD Contrast Potentiometer Terminal Block Tamper Switch Set the keypad address as follows: • Make certain the keypad’s tamper switch is open. • On the keypad, press keys 1, 3 and 5 simultaneously. • Use the arrow keys (/) to select the keypad address. • Press V. • After installing hardwire keypads, perform the Find Modules function.

  27. Peripherals Review

  28. Intrusion Detection PIR technologies incorporating signal processing to provide the utmost in intrusion detection. PIR technologies incorporating signal processing to provide the utmost in intrusion detection. PIR technologies incorporating signal processing to provide the utmost in intrusion detection. PIR technologies incorporating signal processing to provide the utmost in intrusion detection. PIR technologies incorporating signal processing to provide the utmost in intrusion detection. PIR technologies incorporating signal processing to provide the utmost in intrusion detection. PIR technologies incorporating signal processing to provide the utmost in intrusion detection. EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2645/PI Wireless Motion Detector Detector Intelligent, digital full area vision pet immunity distinguishes between the signals received from a human and those received from an animal, for animal immunity of up to 45 kg/100 lb EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg EL-2600/PI Wireless Motion Detector Microcontroller based signal processing, With optional pet immunity up to 25Kg

  29. Intrusion Detection EL-2652/IP Wireless External Pet Immune Detector External detector incorporating two PIRs for the utmost in false alarm protection. Also available in pet immunity version • EL2601/2602 • EL-2601 Wireless Magnetic Switch • EL-2602 Universal Transmitter • Detects intruder entry from doors and windows EL-2650XL Wireless Directional Curtain Detector Quad element directional solid curtain detector for perimeter protection. Narrow beam curtain allows free movement within protected premises.

  30. Intrusion Detection and Event Notification EL-2606 Glass break detector Acoustic glass break detector with superior detection performance EL-2626 Wireless Siren Sounder and strobe available as fully wireless (EL-2626WL) and AC powered (EL-2626AC) EL-2635 Wireless Repeater Extends the range between the control panel and wireless detectors, eliminates problematic reception areas

  31. Keyfobs EL-2640 Remote Control Enables arming and disarming of the system, panic signal activation and control of home automation devices EL-2640 Remote Control Enables arming and disarming of the system, panic signal activation and control of home automation devices EL-2614 Wireless Multi-function Keyfob Keychain option controls system functions like full/part/perimeter arm, disarm, home automation and panic EL-2614 Wireless Multi-function Keyfob Keychain option controls system functions like full/part/perimeter arm, disarm, home automation and panic EL 2611 Wireless Panic Button Wireless Panic Button Water resistant, wireless panic button with Pendant/Keychain option, for 24/7monitoring EL 2611 Wireless Panic Button Wireless Panic Button Water resistant, wireless panic button with Pendant/Keychain option, for 24/7monitoring

  32. Additional Keypads and Keyfobs EL-2620 Wireless Keypad Controls 16 home automation devices and enables one-touch full/part/ perimeter arm/disarm of system EL-2622 Wireless Smart key Reader Easy to use smart key reader for arming and disarming the system EL-2621 Two-way Wireless Keypad Indicates current system status, controls 16 home automation devices and enables one-touch full/part/perimeter arm/disarm of system

  33. Wired Items Infinite Interphone External microphone/speaker unit for two way communication in case of emergency and alarm verification Wired Keypad – KPD/L Enables all system controlling and programming options. An ideal solution for installations where the control system is hidden from view

  34. Environmental Safety EL-2661 Wireless Water Leak Detector Provides early warning of water leaks used in basement or near air conditioners and sinks EL-2603EN Wireless Smoke Detector Photoelectric smoke detector, provides early warning of the presence of smoke. EN-54-7 approved EL-2603 Wireless Smoke Detector Photoelectric smoke detector, provides early warning of the presence of smoke

  35. Environmental Safety EL-2662 Wireless Gas Detector Detects leaks of household heating or cooking gas- methane, propane and butane EL-2664 Wireless Gas CO Detector Detects and warns of carbon monoxide leaks EL-2663 Wireless LowTemperature Detector Detects low temperature (5°C-41°F) to warn before winter freezes which may cause pipes to burst and other damage

  36. System Installation

  37. InstallationProcedure • STEP 1: Opening the housing. • STEP 2: Temporarily powering up the system. • STEP 3: Registering the transmitters. • STEP 4: Testing the chosen mounting location. • STEP 5: Permanently installing the control panel and transmitters. • STEP 6: Installing hardwire LCD keypads

  38. Installation Procedure – Step1 Step1: Opening the Housing • Remove the housing screw located at the bottom of the front cover. • Using a screwdriver carefully press the release tabs as shown in Figure 1 • Lift the front cover away from the back of the housing.

  39. Installation Procedure – Step2 Step2: Temporarily powering up the system • In order to register and test transmitters, it is necessary to temporarily power up the system before installing the control panel. At this stage, do not connect the backup battery. • Thread the power cable through the wiring hole on the back cover and connect the cable to the AC power input on the Main board. • Note: At this stage, ignore any trouble conditions that may appear on the LCD display (e.g. Low Battery). Wiring hole AC power input

  40. Installation Procedure – Step3 Step3: Registering transmitters • Press  + installer code • Enter menu Programming devices [9,1] • Select the type of device (Zones, Keypads etc…) • Select the device number (Zone1, Zone2 etc…) • Trigger two transmissions from the device • The message “Save?” indicates the two transmissions have been successfully received. • Press  to valid or  to cancel the registration. • After validating the validation, the display switches automatically to parameter settings for the current device (Zone Type, Descriptor etc…) – See next slide. • Tip:To check if a device number has already been registered, repeat steps 1 to 4. If a device has been registered previously, the system skips the registration function and switches automatically to parameter settings for the current device (Zone Type, Descriptor etc…)

  41. Installation Procedure – Step3 1-Full 2-Part 3-Perimeter Step3: Registering transmitters – Setting the zone parameters • Press  to enter the zone type setting and use the arrow keys (▲/▼) to select the zone type. Normal (PIR), 24Hr (PIR/magnetic), Entry/Exit (Entrance magnetic), Gas (Gas sensor), Follower (Entrance PIR), Flood (Flood sensor) • Panic (Panic button), Environmental (Universal TX), Medical (medical button), No Motion (PIR), Fire (Smoke sensor), Not Used • Press  to valid your choice, the display • switches to Arm set setting. Set the arm • set for this zone by pressing 1, 2 or 3. • Press  to valid your choice, set the bell option for this zone • Press  to valid your choice, set the chime option for this zone • Press  to valid your choice, set the force arm option for this zone • Press  to valid your choice, Press on  several times to return to • the main menu

  42. Installation Procedure – Step4 ? ? Step4: Testing the chosen mounting location • Press  + installer code • Enter menu TX TEST [7,07,2] • The system waits for transmissions. Activate the transmitter you wish to test; the transmitter’s signal strength is displayed and one to four tones are sounded accordingly. • If the signal strength is inferior to 6, move the transmitter to a better location as suggested below or use the EL-2635 repeater ZONE#1 S=9 OK Metal Reduce the number of obstacle Consider the obstacle thickness Consider path angles Consider the wall material

  43. Installation Procedure – Step5 Step5: Installing the Control System and Transmitters • Disconnect AC power • Open the housing • Remove the backup battery pack • Install wall anchors in the appropriate positions. • Thread any required cables through the wiring hole on the back cover and make any necessary wiring connections: AC Power, Telephone, Wired keypad. • Apply AC power • Connect the battery pack • Tip:To check if a device number has already been registered, repeat steps 1 to 4. If a device has been registered previously, the system skips the registration function and switches automatically to parameter settings for the current device (Zone Type, Descriptor etc…)

  44. Installation Procedure – Step6 The system supports up to three hardwire LCD keypads that may be installed up to 300m from the control panel. Flash Programming Connector LCD Contrast Potentiometer Terminal Block Tamper Switch • Set the keypad address as follows: • Make certain the keypad’s tamper switch is open. • On the keypad, press keys 1, 3 and 5 simultaneously. • Use the arrow keys (/) to select the keypad address. • Press . • After installing hardwire keypads, perform the Find Modules function.

  45. Installation Procedure – Step7 Step7: Basic programming • Set the communication parameters via menu ACCOUNTS [9,5,1] • Telephone number • Account number • Communication protocol (Contact ID, Twa Follow me) • Communication interface (GSM, PSTN) • Call attempts • Two way audio

  46. Repeater – EL2635 • Extends the range between control panel and wireless detectors. • Ideal for problematic reception areas like attics, basements and cellars.

  47. Repeater – EL2635 • Up to 4 repeaters for one CP. • 32 Transmitters registered to each repeater. • Registration & tests performed using a programming keypad.

  48. Repeater Installation Repeater CP • The repeater should be installed on the midway between the CP and the transmitter.

  49. Repeater Installation Minimize the number of RF obstacles. The Repeater should be at least 1.50m above the floor and 1m below the ceiling. Apply all rules as for transmitters and receivers. 1m 1.5m

More Related