1 / 7

Progress report on APD

Progress report on APD. The schematics of Hamamatsu APD circuit. This doesn’t reflect internal elements of different pre-amps, for which output part and load must be modified slightly. Progress report on APD. This is a data from Gain measurements using the green LED.

uta-boyle
Télécharger la présentation

Progress report on APD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Progress report on APD • The schematics of Hamamatsu APD circuit. This doesn’t reflect internal elements of different pre-amps, for which output part and load must be modified slightly.

  2. Progress report on APD • This is a data from Gain measurements using the green LED. • The graph on the next slide shows the data obtained in NICADD and data provided by manufacturer.

  3. Progress report on APD

  4. Progress report on APD • This is a fit to the gain data, done in Origin 6.1 software. Points were fitted into formula:

  5. Progress report on APD • This is a crosstalk measurement between neighboring APD element. • For signal from LED< equivalent to 800 MIPs, crosstalk is less then 4%-3%, for a real-life signal with maximum of 100 MIPs this number is expected to decrease even further.

  6. Progress report on APD • Above are the results of the channel-by-channel test. Red areas indicate the APD elements that have characteristics much worse then the green and yellow ones.

  7. Progress report on APD Summary • APD connection circuit is realized and is working • Fast measurements of Gain of APD were performed • All elements of APD matrix were tested • No change in APD temperature was detected during tests • Work is ongoing on the second PC board for the second APD • Next, pre-amp will be connected and all channels tested • Also, there are plans to measure the Gain vs. temperature of APD

More Related