1 / 25

EAGLE

EAGLE. EAGLE. What is Eagle?. A software which provides the environment to create PCB data files. Total 10 data files called Gerbers. Each of which contains data of a specific layers. Eagle Basics. Schematic : Can create a rough design Can browse various components

uyen
Télécharger la présentation

EAGLE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EAGLE

  2. EAGLE

  3. What is Eagle? • A software which provides the environment to create PCB data files. • Total 10 data files called Gerbers. • Each of which contains data of a specific layers.

  4. Eagle Basics • Schematic : • Can create a rough design • Can browse various components • Can name them ,assign values and connect them • Board • Can adjust the position of component • Route wire lines(auto route or manual) • Create data files

  5. Basics

  6. Getting started • Add – adds various components to workspace • Name – names components(if you name two nets same then they get connected) • Value- assigns value to component • Net – makes electrical connections • Label- labels parts • Move – moves parts • Delete- deletes parts • Sheet –creates new sheet

  7. Add – adds various components to workspace

  8. Name – names components(if you name two nets same then they get connected)

  9. Nets

  10. Your choice

  11. Grid • Grid – 1. size –width of a grid 2.multiple- it shows every (multiple no)th line but you can still route nets according to size

  12. Grid Mil Inches Mic Mm Distance b/w two nearest holes in breadboard is 0.1 inch 1 inch = 2.54 mm 1 inch = 1000 mil 1 mm = 1000 mic

  13. Option • Assign – assigns shortcut keys for commands. • User interface-select background color ,mouse wheel zoom ,command icons etc.

  14. Board • Route- makes electrical connections (manual) • Auto - makes electrical connections (automatic) • Rip-up-deletes a electrical connection • Via – creates a pad to change layer • Erc –shows electrical errors • Errors – shows design errors • Drc- sets clearance of board

  15. Switching to board

  16. Route Select layer Options for pads and routing Select route

  17. Auto -Automatically routes electrical connections

  18. DRC-design rule check minimum clearance =12mil

  19. Minimum size of signal lines=24milpower lines=36mil

  20. Errors

  21. Creating gerber files • Click on cam job icon • Go to file>open>job • Select file named “sfe-gerb274x”(can be downloaded from sparkfun.com) • And then process job.

  22. Creating new components • In eagle control panel click File>new>library • Click on new device ,package ,symbol and write name of the component.

  23. Symbol

  24. Package

  25. Device • Finally go to device add package and symbol to workspace. • Connect pins and pads. • And save file to c c>program files>eagle>lbr • Go to control panel right click on libraries and click use all. • Now you can use your new device.

More Related