1 / 18

The Grainger Center for Electric Machinery and Electromechanics – Update, May 2002

The Grainger Center for Electric Machinery and Electromechanics – Update, May 2002. May 2002. P. T. Krein, Director Grainger Center for Electric Machinery and Electromechanics Dept. of Electrical and Computer Engineering. Purposes of the Grainger Center.

valeriaa
Télécharger la présentation

The Grainger Center for Electric Machinery and Electromechanics – Update, May 2002

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Grainger Center for Electric Machinery and Electromechanics – Update, May 2002 May 2002 P. T. Krein, Director Grainger Center for Electric Machinery and Electromechanics Dept. of Electrical and Computer Engineering

  2. Purposes of the Grainger Center • Establish leadership in electric machines and electromechanics. • Nurture a new generation of engineers for the electric machinery field. • Advance the technologies of machines and electromechanics. • Support student team programs in the field, such as the Future Energy Challenge.

  3. Purposes of the Grainger Center • Organize a national collaborative network for machines innovation. • California – Berkeley • Georgia Tech • Ohio State • Purdue • RPI • Wisconsin

  4. Purposes of the Grainger Center • Stimulate activity in the processing and use of electrical energy as it relates to expanding the scope and applications of machines and electromechanics. • Please see http://www.energychallenge.orgfor a view of the major topics for the 2003 Future Energy Challenge. • Sponsored by USDOE, USDOD, IEEE, and by the Grainger Center.

  5. About the Grainger Center • Started in 1999 with a $1.4 million grant from the Grainger Foundation. • This included extensive equipment support as well as operations. • Grant support will be renewed in 2002. • A new faculty member (Pat Chapman) was added and supported through the CEME.

  6. Project Overview • Fundamentals of machine design. • Best use of materials. • Point-by-point selection. • Field analysis for “optimization.” • MEMS work from the application and electromechanics viewpoints. • Motor control (from a systems perspective). • Power electronic devices to expand the application of drives.

  7. Project Overview • New energy sources such as miniature fuel cells. • Biomechanical research. • Ideas with the potential for revolutionary advances in machines and electromechanical devices.

  8. Sample Projects • Linear motor design for the teaching laboratory. • This provides a true “open-frame” arrangement for detailed classroom experiments.

  9. Sample Projects • Induction machine optimization for “dedicated inverter” operation. • Select among copper, aluminum, and steel at each point in the rotor, to maximize torque while minimizing losses. • Take advantage of an electronic drive to deliver the necessary frequency to provide high torque and low loss.

  10. Sample Projects • Battery equalization for improved battery management. • Keep battery voltagestightly matched duringcharge and dischargeto maintain performance. • A simple switched-capacitor approach provides precise matching while avoiding tolerance limitations.

  11. Sample Projects • Gallium-nitride device development for power electronics. • GaN is an important alternative to SiC. • Has the advantages of a high-bandgap material, plus it is in production for LEDs. • A very promising material for power semiconductors.

  12. Sample Projects • Efficiency-optimizing control for motor drives. • This is based on the ripple-correlation concept invented at Illinois. Motor flux is adjusted in real time to minimize power consumption. • Significantbenefits at light load.

  13. Sample Projects • High-fidelity pulse width modulation (PWM) for audio applications – with spin-offs for drives.

  14. Future Projects • Fast 3D magnetics for machine design and analysis. • Power processing for miniature fuel cells, and a possible “fuel cell center.” • Nonlinear controls for complicated motor-load combined systems. • Noise mitigation in machine applications. • Active filters to minimize drive EMI.

  15. Ac Motor Designs for 42 V Auto Systems Car motor usage is growing fast. It will soon rise to 200 electric motors per car. The 42 V system redesign is an opportunity. Source: Johnson Electric, 1999.

  16. Vehicle Applications • CEME has experience in electric and hybrid cars.

  17. Miniature Power Applications • A sample design challenge: • Efficient miniature power for communications, network nodes, and MEMS devices. • Supply just a few milliwatts, with very high efficiency. • Example: power on a chip.

  18. Conclusion • The Grainger CEME is being built up as the national leader in electric machines and electromechanics. • We intend to nurture a new generation of machine designers with broad systems expertise and a background in fundamental electromechanics. • We seek to pursue revolutionary concepts in the design, control, and use of all types of electromechanical devices.

More Related