1 / 37

NEESR-SG-2005

NEESR-SG-2005. Seismic Simulation and Design of Bridge Columns under Combined Actions, and Implications on System Response. University of Nevada, Reno University of Missouri, Rolla University of Illinois, Champaign-Urbana University of California, Los Angeles Washington University, St. Louis.

vanig
Télécharger la présentation

NEESR-SG-2005

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NEESR-SG-2005 SeismicSimulation and Design of Bridge Columns under Combined Actions, and Implications on System Response University of Nevada, Reno University of Missouri, Rolla University of Illinois, Champaign-Urbana University of California, Los Angeles Washington University, St. Louis

  2. University of Missouri, Rolla Abdeldjelil “DJ” Belarbi (co-PI) Pedro Silva Ashraf Ayoub University of Illinois-Champaign-Urbana Amr Elnashai (co-PI) Reginald DesRoches (GaTech) University of California, Los Angeles Jian Zhang (co-PI) Washington University, St. Louis Shirley Dyke (co-PI) University of Mexico Sergio Alcocer ParticipantsUniversity of Nevada, RenoDavid Sanders (Project PI)

  3. Causes of Combined ActionsSystem to Component to System • Functional Constraints - curved or skewed bridges • Geometric Considerations - uneven spans or different column heights • Multi-directional Earthquake Motions -significant vertical motions input or near field fling impacts • Structural Constraints - stiff deck, movement joints, soil condition and foundations

  4. Significance of Vertical Motion • Effects of Vertical Motions on Structures • Direct Compressive Failure • Reduction of Shear and Moment Capacity • Increase in Shear and Moment Demand • Axial Force Response

  5. Significance of Torsion • Interaction of Shear-Torsion results in early cover spalling of non-circular/rectangular cross-sections due to circulatory shear stresses. • What are the effects of warping on the flexural and shear capacity of columns? • What is the impact of multiple loadings on thin-tube theory? • What are the effects on the curvature ductility and location of the plastic hinge?

  6. Bending-Shear Combination of Bending-Shear- Torsion M-V-T Interactions Shear- Torsion

  7. Parameters • Cross-section - Circle, Interlocking Spiral, Square • Column aspect ratio - moment/shear ratio • Torsion/shear ratio - high and low torsion • Level of axial loads • Level of detailing for high and moderate seismicity • Bidirectional bending moment - non-circular cross-sections • Type of Loading – Slow Cyclic, Pseudo-dynamic and shake table/dynamic

  8. Pre-test System Analysis • Perform seismic simulations of bridge systems under combined actions to study effects of various bridge components on global and local seismic response behavior of bridge system • Bridge superstructure • Columns (Piers) • Foundations and surrounding soil • Embankments • Nonlinear soil-foundation-structure interaction • Multi-directional motions

  9. Analysis • Selected 4 ground motion suites that incorporate the site-dependent probabilistic hazard analysis and ground motion disaggregation analysis. • Selected 2 bridge prototypes that are distinctive in terms of structural characteristics and dynamic properties. • Conducted time history analysis of prototype bridges subjected to multi-directional ground shakings and evaluate the effect of vertical motions on seismic demand. • Implemented nonlinear structural and foundation elements.

  10. Examples of Prototype Bridges

  11. Structural Response of Bridge #8 Force Demand Displacement Demand Tension Bottom of Column in Bent#3 Column in Bent#3 Top of Column in Bent#1 Column in Bent#1 Column in Bent#1 Bottom of Column in Bent#1 1986 N. Palm Springs Earthquake

  12. Pre-test Component Analysis • Perform pretest simulations of test specimens with realistic loading and boundary conditions • Provide guidance for tests conducted • Optimize number and parameters of test specimens • Identify realistic loading and boundary conditions • Integrate various analytical models into the framework of UI-Simcor for pseudo-dynamic hybrid testing

  13. Analytical Program • Development Inelastic Models for RC Sections under Combined Loading • Modeling of Specimens tested under Pseudo-Dynamic/Dynamic Conditions • Complex and Simplified Tools • Parametric Studies • Bridge System Analysis • Development of Seismic Design Criteria

  14. Development Inelastic Models for RC Sections under Combined Loading Deficiencies of Available Analytical Models: • Current Inelastic Frame software Packages (e.g. OpenSees, Zeus-NL, FedeasLab) focus on flexural behavior of RC members only. • The combined axial/shear/flexural/torsional behavior is not considered in current models.

  15. Experimental Program • Experimental investigation of columns under multi-directional loadings with varying levels of axial force and axial-flexure interaction ratios linked to analysis. • Slow cyclic tests at UMR. • Pseudo-dynamic tests at UIUC • Dynamic tests at UNR • Integrated bridge test managed by UMR, tested at UIUC

  16. UMR Test Setup

  17. Test Setup

  18. UMR Test Setup Position of (2) Horizontal Actuators. Actuators Position for S-Pattern loading Test Unit (Interlocking Spiral Column Setup for Bi-Axial Bending Shown)   Loading Frame Loading Frame Rotation Angle – Twist/Torsion Test Unit Offset Angle for Bi-Axial Bending

  19. Shape Ht. Scale Design Dire c tions Description Level 1axial - high shear - 108 - 24 M01 1:2 High U, A1 flexure(I01) (a) M02 108 1:2 High U, T, A1 M01 with torsion (e) - 24 M05 108 1:2 High U, T, A1 M02 with high to r sion (c) - 24 M06 150 1:2 High U, T, A1 high torsion (d) - 24 M07 150 1:2 Mo d . U, A1 M01 with moderate d e tails (b) - 24 M08 150 1:2 High T, A2 Level 2 axial - torsion (g) - 24 M09 150 1:2 High U, T, A2 Level 2 Axial (f) - 24 M10 150 1:2 High U (m) Level 1 axial - lo w shear - (b) - 24x48 M11 150 1:2 High U (M) M10 with bidirectional M (b) - 24x48 M12 150 1:2 High U, T (m) M10 with torsion (d) - 24x48 M13 150 1:2 High U, T (M) M11 with torsion (d) - 24x48 M14 108 1:2 High U Level 1 ax ial - high shear (a) - 24x24 M14 with high torsion and - 24x24 M15 108 1:2 Mo d . U, T moderate details (c) M15 with high torsion and - 24x24 M16 156 1:2 Mo d . U, T moderate details (d) 144 1:2 High - 24 Prototype bridge evaluation – M17 156 1:2 High - 24 Eart h quake DONE AT UIUC by UMR. - 24 108 1:2 High UMR Test Matrix Testing in June

  20. Column Fabrication

  21. Column Testing Specimen M07: Ductility 8

  22. Large Testing Facility, UIUC

  23. Large Testing Facility, UIUC • Three 6 DOF loading and boundary condition boxes of capacity 3000kN to 4500kN • Displacement capacity +/- 250 mm per box • Reaction wall ~15x9x8 meters • Three advanced high speed DAC systems • Video and J-Camera data capture • Simulation Coordinator UI-SIMCOR for multi-site hybrid simulation

  24. Small Scale Testing Facility, UIUC

  25. Test at UIUC Large Scale Test Small Scale Test Test with UMR NEES-R UIUC Experiment • MISST test (previous multi-site test at UIUC) will provide the test bed for the loading protocols • Tests of 3 large scale and 4 small scale bridge columns with different aspect ratios and seismic design details using MUST-SIM Facility • Column test with UMR under different loading conditions • Verify local and global analytical part of the hybrid simulation • Provide an opportunity for researchers outside of a NEES facility • Detailed design of UIUC and UNR experiments will be guided by bridge system analysis

  26. Small-Scale Testing • Current testing • Several 1/16 scaled piers are currently being tested • Used to evaluate system and material/pier design Test Setup After Test

  27. UNR Shake Table Facility • Previous Tests have Focused on Unidirectional Motion. • System of Decoupling the Vertical Load and Inertial Mass has been used. • Vertical Load was Held Constant. A system will now be used to decouple variable axial load from the inertial load with bi-directional lateral shaking.

  28. UNR Program

  29. Tested Structure UI-SIMCOR Disp. Disp. Force Force Structural Module (Zeus-NL) Soil & Foundation Module (OpenSees) UMR Test at UIUC

  30. International Cooperation • University of Mexico

  31. Educational Activities • UCIST shake tables incorporated for hands-on exercises and experiments • Existing K-12 outreach programs will be enhanced with additional modules • UNR: Summer camps and ME2L program • UIUC: Engineering Open House • UMR: High school engineering summer course • WU: GK-12 Program

  32. Educational Activities • Modules to be developed to enhance curriculum on undergraduate and graduate levels • Undergraduates involved in research through REU programs • Encourage students from underrepresented groups through Minority Engineering Program, GAMES, MERGE, and GetSet program • Online continuing education course to be developed at UMR for practicing Engineers

  33. UMR UMR as NEES-POP

  34. UMR as NEES-POP

  35. UMR as NEES-POP

  36. Questions??

More Related