Brihaspathi Technologies- Fire Alarm System Suppliers in Hyderabad

1. Fire Alarms

2. Table of Content • Introduction • Types of Fire Alarms • Solutions We Provide • Our Fire Alarms Categories • Features • Applications • Conclusion

3. Introduction • Fire alarm is used to detect the smoke and fire. Fire alarm warns the people that they are in risk. Fire alarms are activated automatically from smoke detectors and heat detectors. • Alarms sounds like bells or horns and it can give the message of risk. • Fire alarm sounds can be set in different frequencies such as low medium and high depend upon devices. • Some of the fire alarms sound like a siren.

4. Types of Fire Alarms • Fire alarms are four types of fire detectors they are heat, ionization, photoelectric, and ionization/photoelectric • Heat Detector: Heat detector detect the heat and increase in temperature. These detectors have some false alarm. • Heat detector takes more time to find out fire compare to smoke detector • Smoke detectors may cause false alarms such as lot of moisture in the air, or in dusty areas

5. Ionization Detector: Ionization detector contains two metal plates with high voltage if an electron in this space bang due to the smoke entering the chamber then causes alarm to sound. • These detectors are very good and fast in detecting the burning fires.

6. Photoelectric Smoke Detector: In this alarm there is a light sensing chamber. In this chamber a led light shoots a beam of light in a straight light across the chamber. • The alarm detects the smoke enters the chamber it change the direction of the led light from the straight path into a photo sensor in a different block in a same chamber. • As soon as light beams hit the sensor alarms starts sound.

7. Ionization/Photoelectric Smoke Detector: A combination of smoke detectors is more secure to protect from fire. Combination of both detectors can identify different types of fire and smoke and it detects faster than the single detector.

8. Solutions We Provide • Brihaspathi Technologies deals in the sales and supply of trending and original fire alarm systems. • Each fire alarm system provides complete protection against fire accidents. • Brihaspathi Technologies' fire alarms offer advanced, intelligent and addressable fire control features. • Our experience with different clients across verticals tells us that, choosing the right fire protection solution means to guarantee complete protection for the facility. • We go a mile ahead in fire control systems, with supply of not only fire alarm systems but also supporting equipment that helps in emergency power shutdown management, and intrusion detection system.

9. Our Fire Alarms Categories • Network Fire Alarm Control Panel • Addressable Fire Alarm and Audio Network • Conventional Fire Alarms • Intelligent Fire Alarms • Suppression Control Units • Fire and Gas Network Fire Alarms • Voice Evacuation Systems • Annunciators • Detection and Input Devices • Signaling/Output Devices • Speakers • Power Supplies • Tools (Installation, Programming, Testing Tools and Equipment for fire alarm systems)

10. Features • Avoid Smoke Inhalation • Early Fire Detection • Decrease Risk of Fire Damage • 24/7 Monitoring • Low Maintenance • Low Power Consumption • Low Cost

11. Applications • Corporate Industries • Business Sector • Banks • Education • Hospitals • Hotels • Homes

12. Conclusion Fire alarms are important because they save lives. Maintain a fire alarm 6 to 12 inches distance from a wall. Fire alarms should be used in different organizations, homes, hospitals, education etc. Fire alarm works to alert people to evacuate a location in which a fire or smoke is present. Most fire alarms sounds like beep, bell, horn, siren noise is made. This sound is to allow notification to be heard. Hope with this PPT, we are able to help you in making the better decision for your business. If you have any queries you can mail us Email: seo@brihaspathi.com Contact us: 9581234499 Website: https://www.brihaspathi.com/fire-alarms.html

13. Thank You