1 / 10

TYPES OF POWER DISTURBANCES

TYPES OF POWER DISTURBANCES. 1.Transients 2. Interruptions 3. Sag / Undervoltage 4. Swell / Overvoltage 5. Waveform distortion 6. Voltage fluctuations 7. Frequency variatio ns.

vivien
Télécharger la présentation

TYPES OF POWER DISTURBANCES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TYPES OF POWER DISTURBANCES

  2. 1.Transients 2. Interruptions 3. Sag / Undervoltage 4. Swell / Overvoltage 5. Waveform distortion 6. Voltage fluctuations 7. Frequency variations

  3. Impulsive transients are sudden high peak events that raise the voltage and/or current levels in either a positive or a negative direction. An oscillatory transient is a sudden change in the steady-state condition of a signal's voltage,current, or both, at both the positive and negative signal limits, oscillating at the naturalsystemfrequency.

  4. 2.Interruptions An interruption is defined as the complete loss of supply voltage or load current.

  5. A sag is a reduction of AC voltage at a given frequency for the duration of 0.5 cycles to 1 minute’s time. Under voltages are the result of long-term problems that create sags.

  6. A swell is the reverse form of a sag, having an increase in AC voltage for a duration of 0.5 cycles to 1 minute’s time Overvoltage's can be the result of long-term problems that create swells

  7. Direct current (DC) can be induced into an AC distribution system, often due to failure of rectifiers within the many AC to DC conversion technologies Harmonic distortion is the corruption of the fundamental sine wave at frequencies that are multiples of the fundamental Interharmonicsare a type of waveform distortion that are usually the result of asignalimposed on the supply voltage by electrical equipment such as static frequency converters, induction motors and arcing devices. Notching is a periodic voltage disturbance caused by electronic devices, such as variable speed drives, light dimmers and arc welders under normal operation Noise is unwanted voltage or current superimposed on the power system voltage or current waveform

  8. A voltage fluctuation is a systematic variation of the voltage waveform

  9. Frequency variations may cause a motor to run faster or slower to match the frequency of the input power.

More Related