1 / 9

Modeling & Simulation National Center for Aerospace Leadership CCAT Engineer: Chris Pfeifer CCAT Presenter: Brian Ki

Modeling & Simulation National Center for Aerospace Leadership CCAT Engineer: Chris Pfeifer CCAT Presenter: Brian Kindilien. STEP Tools, Inc. Machining of Mold Demonstration Part May 14, 2009. Machining Demonstration. Mold – Aluminum-7075 CCAT Machining Applications Laboratory

wallis
Télécharger la présentation

Modeling & Simulation National Center for Aerospace Leadership CCAT Engineer: Chris Pfeifer CCAT Presenter: Brian Ki

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modeling & SimulationNational Center for Aerospace LeadershipCCAT Engineer: Chris PfeiferCCAT Presenter: Brian Kindilien STEP Tools, Inc. Machining of Mold Demonstration Part May 14, 2009

  2. Machining Demonstration Mold – Aluminum-7075 CCAT Machining Applications Laboratory DMG DMU 70 eVo Linear Siemens 840D Control Cutting Tools Helical Tools

  3. Machining Demonstration-Machine and Tools DMG DMU 70 eVo Linear 3-Axis Linear 2-Axis Rotary 18,000 RPM Spindle Special thanks to Helical tools involvement with the process

  4. Machining Process 10 Tools 6 End Mills/4 Hole Manufacturing Tools Helical Provided Tools 18, 4, 8, 5

  5. Code Export Export Code for Siemens 840D Siemens Traori Noted Absences Drilling and Reaming Cycles Home Commands Stock Origin Coordinates

  6. Steps to Running Code Export Siemens *.MPF code and loaded onto DMG to simulate Without alterations, the simulation ran Dry ran the part, where some limitations noted: No Home Commands between operations This causes a problem after the 5-axis moves, as there is no command to return the table to B0 C0 CCAT would like to see home commands to make sure tool and table are reset each time No Drilling Cycles This eliminates the possibility of clear Peck Drilling Cycles Ream Cycle is not available either

  7. Solutions Added Home commands at Tool changes by utilizing the Insert NC Function within Step Explorer “G0 SUPA Z0 SUPA X-28 Y-14 SUPA B0 C0” If selecting Return Home, only G0 Z0 is inserted Ignored Peck Cycles due to small depth Added Spindle Stop at bottom of Ream for a cleaner cycle With these additions, then set up the work offsets and ran the part Work offsets were found by Z – Touch Probe the Top Surface X,Y – Touch Probe Cycle to find center of Bolt Hole The latter would be made easier with the ability to determine position inside STEP Explorer Resorted to exporting the Stock Model to SolidWorks and using the Measure Function The Workpiece model did not export correctly

  8. Machining Process Improvement Through Helical’s James Graham’s recommendations, we were able to increase feeds and speeds of the highlighted tools. By doing this, we cut the cycle time by over 50%

  9. Conclusions • Overall, a very successful demonstration!

More Related