1 / 10

Lubrication

Lubrication. Oil. Purpose Cool Clean Lubricate Seal Properties Viscosity Pour point Service classification Types Mineral based Synthetic based. Viscosity Ratings. 10w-30 W stands for winter, NOT weight

wendi
Télécharger la présentation

Lubrication

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lubrication

  2. Oil • Purpose • Cool • Clean • Lubricate • Seal • Properties • Viscosity • Pour point • Service classification • Types • Mineral based • Synthetic based

  3. Viscosity Ratings • 10w-30 • W stands for winter, NOT weight • Passes the 10W viscosity test, meaning that it will flow easily enough at sub-zero temperature to provide adequate lubrication • Passes the 30 viscosity test, meaning that at 212 degrees F it has thinned out to what a straight 30 weight oil would have

  4. Pour Point • Five degrees above the temperature at which oil will no longer flow • For 5w oils the pour point is approx. –40 degrees Fahrenheit • Pumping point (point at which the oil will no longer allow sufficient flow through the engine) is generally about 25 degrees above the pour point.

  5. Service Classification • API (American petroleum institute) certifies oil based on the oil’s performance in various tests and the API seal will be on the bottle • SA - SL ratings are for gasoline engines • S stands for Service • CA - CI-4 ratings are for diesel engines • C stands for Commercial • The oil used in an engine must be the service classification called for by the manufacturer or more recent • API Service Classifications

  6. Types of Oil • Mineral based • Refined from crude oil • Molecules are not as Consistent as synthetics • Synthetic based • Polyalphaolefin (PAO) base stock • Hydroisomerized petroleum base stock • More consistent molecular structure

  7. Oil Performance Additives and Properties • Additives • Detergents • Dispersants • Friction modifiers • Anti-oxidants • Anti-acid • Anti-foaming • Properties • Shear strength • Flash point

  8. Lubrication System Components • Oil sump • Usually the oil pan • May be baffled • May use a windage tray to prevent oil from “roping” around the crankshaft • Oil pick-up – usually has a coarse screen

  9. Lubrication System Components • Oil pump • Two common types • Gear • Rotor • Oil pump creates flow, not pressure • Pressure is created when when the oil pump has a larger capacity that all of the “leaks” in the engine • Pressure regulator • Most located in the pump • Excessive oil pressure may rupture a pump, erode bearings, cause high oil temps, and increase the amount of power needed to run the oil pump (rule of thumb - 10 PSI per 1000 rpm)

  10. Lubrication System Components • Oil filter • All oil that leaves the pump goes directly to the filter • All filters contain a by-pass valve that allows oil to by-pass the filter if it becomes clogged • Many filters contain an anti-siphon check valve to prevent dry startups • Oil coolers • Oil passages • Oil pressure indicator

More Related