1 / 20

SEALING OF POROUS LOW- k DIELECTRIC WITH H 2 /He PLASMA CLEANING

SEALING OF POROUS LOW- k DIELECTRIC WITH H 2 /He PLASMA CLEANING Juline Shoeb a) and Mark J. Kushner b) a) Department of Electrical and Computer Engineering Iowa State University, Ames, IA 50011 jshoeb@eecs.umich.edu b) Department of Electrical Engineering and Computer Science

willa-dale
Télécharger la présentation

SEALING OF POROUS LOW- k DIELECTRIC WITH H 2 /He PLASMA CLEANING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SEALING OF POROUS LOW-k DIELECTRIC WITH H2/He PLASMA CLEANING Juline Shoeba) and Mark J. Kushnerb) a) Department of Electrical and Computer Engineering Iowa State University, Ames, IA 50011 jshoeb@eecs.umich.edu b) Department of Electrical Engineering and Computer Science University of Michigan Ann Arbor, Ann Arbor, MI 48109 mjkush@umich.edu http://uigelz.eecs.umich.edu June 2010 *Work supported by Semiconductor Research Corporation ICOPS10_01

  2. University of Michigan Institute for Plasma Science & Engr. AGENDA • Sealing of Low-k Dielectrics • Modeling Platforms • Generation of Hot H • Polymer Removal and PR Stripping In He/H2 Mixtures • Sealing Mechanism Using Ar/NH3 Plasma Treatment • Sealing Efficiency • Pore Radius and Aspect Ratio • Concluding Remarks ICOPS10_02

  3. University of Michigan Institute for Plasma Science & Engr. POROUS LOW-k DIELECTRICS • The capacitance of the insulator contributes to RC delays in interconnect wiring. • Low-k porous oxides, such as C doped SiO2 (CHn lining pores) reduce the RC delay. • Porosity  0.5, Interconnectivity  0.5. • Inter-connected pores open to plasma may degrade k-value by reactions with plasma species. • Desire to seal pores. Ref: http://www.necel.com/process/en/images/porous_low-k_e.gif ICOPS10_03

  4. University of Michigan Institute for Plasma Science & Engr. PORE PLASMA SEALING MECHANISM • Investigated 2-step process: • He/H2 plasma • He+ and photons break Si-O bonds • Hot H, He+ remove H from pore lining CHn groups, thereby activating sites. • Hot H strips off photo-resist. • NH3 plasma: Seals pores by forming C-N and Si-N bonds which bridges opening. • Reaction mechanisms and scaling laws for He/H2 and NH3 plasma sealing of porous SiCOH have been developed based on results from a computational investigation. Ref: A. M. Urbanowicz, M. R. Baklanov, J. Heijlen, Y. Travaly, and A. Cockburn, Electrochem. Solid-State Lett. 10, G76 (2007). ICOPS10_04

  5. University of Michigan Institute for Plasma Science & Engr. MODELING : LOW-k PORE SEALING He/H2 PLASMA Ar/NH3 PLASMAS Coils Energy and angular distributions for ions and neutrals Plasma Metal Porous Low-k Substrate Wafer • Plasma Chemistry Monte Carlo Module (PCMCM) • Hybrid Plasma Equipment Model (HPEM) • Monte Carlo Feature Profile Model (MCFPM) ICOPS10_05

  6. University of Michigan Institute for Plasma Science & Engr. MONTE CARLO FEATURE PROFILE MODEL (MCFPM) • The MCFPM resolves the surface topology on a 2D Cartesian mesh to predict etch profiles. • Each cell in the mesh has a material identity. (Cells are 4 x 4 ). • Gas phase species are represented by Monte Carlo pseuodoparticles. • Pseuodoparticles are launched towards the wafer with energies and angles sampled from the distributions obtained from the PCMCM. • Cells identities changed, removed, added for reactions, etching, and deposition. HPEM PCMCM Energy and angular distributions for ions and neutrals MCFPM Provides etch rate And predicts etch profile ICOPS10_06

  7. University of Michigan Institute for Plasma Science & Engr. INITIAL LOW-kPROCESS INTEGRATION • 80 nm thick porous SiCOH. • CH3 lines pores with Si-C bonding. • Ave pore radius: 0.8-1.1 nm • Process integration steps: • Ar/C4F8/O2 CCP: Etch 10:1 Trench • He/H2 ICP: Remove CFx polymer, PR; activate surface sites. • NH3 ICP: Seal Pores Hard Mask Porous Low-k SiCOH Si ICOPS10_07

  8. University of Michigan Institute for Plasma Science & Engr. SiOCH ETCHING IN Ar/C4F8/O2 PLASMAS • SiO2 Etching M+ + SiO2(s) SiO2*(s) + M CxFy+ SiO2*(s)  SiO2CxFy(s) M+ + SiO2CxFy(s)  SiFm + COn + M • CHn Group Etching M+ + CHn(s)  CHn-1(s) + H + M O + CHn(s)  CO + Hn • Polymer Deposition M+ + SiO2CxFy(s) SiO2CxFy*(s)+ M CxFy + SiO2CxFy*(s)  SiO2CxFy(s)+POLY(s) CxFy + CHn-1 CHn-1(s) + CxFy(s) M+ + CxFy(s)  CxFy*(s) + M CxFy* + CxFy (g)  CxFy(s) + POLY(s) ICOPS10_08

  9. He/H2 PLASMAS: POLYMER/PR ASHING AND SURFACE ACTIVATION University of Michigan Institute for Plasma Science & Engr. • Polymer Removal M++ POLY(s)  CF2 + M • H**+ POLY(s)  CHF2 • H**+ POLY(s)  CF + HF • H2**+ POLY(s)  CH2F2 • PR Etching M++ PR(s)  PR + M • H**+ PR(s)  CH4 • H2**+ PR(s)  CH4 • SiO2/CHn Activation M+ + CHn(s)  CHn-1(s) + H + M H** + CHn(s)  CHn-1(s) + H2 M+ + SiO2(s)  SiO(s) + O(s) + M hν+ SiO2(s)  SiO(s) + O(s) **Translationally hot ICOPS10_09

  10. University of Michigan Institute for Plasma Science & Engr. SEALING MECHANISM IN Ar/NH3 PLASMA • N/NHx species are adsorbed by activated sites forming Si-N and C-N bonds to seal pores. • Further Bond Breaking M+ + SiO2(s)  SiO(s) + O(s) + M M++ SiO(s)  Si(s) + O(s) + M • N/NHx Adsorption NHx + SiOn(s)  SiOnNHx(s) NHx + Si(s)  SiNHx(s) • NHx + CHn-1 (s)  CHn-1NHx(s) • NHx + P*(s)  P(s) + NHx(s) • SiNHx-NHy/CNHx-NHy compounds seal the pores where end N are bonded to Si or C by Si-C/Si-N NHy + SiNHx(s)  SiNHx-NHy(s) NHy + CHn-1NHx(s)  CHn-1NHx-NHy(s) ICOPS10_10

  11. University of Michigan Institute for Plasma Science & Engr. PORE-SEALING BY SUCCESSIVE He/H2 AND NH3/Ar TREATMENT • Surface pore sites are activated by 610s He/H2 plasma treatment. • Ar/NH3 plasma treatment seals the pores by forming bridging Si-N, N-N and Si-C bonds. • Initial Surface Pores • He/H2 Plasma Site Activation • Ar/NH3 Plasma Pore Sealing Animation Slide-GIF ICOPS10_11

  12. University of Michigan Institute for Plasma Science & Engr. TYPICAL PLASMA PROPERTIES: H2/He ICP • Total ion density (cm-3): 1.50 x 1011 • Neutral densities(cm-3): H9.0 x 1012 H27.0 x 1013 H2(v=1) 3.0 x 1011 H2(v=2)3.0 x 1011 H2(v=3)3.0 x 1011 H2(v=4)3.0 x 1011 H2(v=5)3.0 x 1011 • Major fluxes to the substrate (cm-2 s-1): H6.0 x 1017 H23.0 x 1018 H2(v=1)2.0 x 1016 H2(v=2)2.0 x 1016 H2(v=2) 2.0 x 1016 H+2.0 x 1015 H2+8.0 x 1013 • Conditions: H2/He = 25/75, 10 mTorr, 300 W ICP ICOPS10_12

  13. University of Michigan Institute for Plasma Science & Engr. HOT H GENERATION: He/H2 ICP • Vibrational Excitation e + H2(v=0) H2(v=1)+ e e + H2(v=n) H2(v=n+1)+ e • Hot H Generation e + H2(v=n) H** + H** + e • Charge Exchange Reactions H2(v=n) + H2+H2(v=n)** + H2+ H2(v=n) + H2+H** + H3+ H + H2+H2(v=0)** + H+ H2(v=n) + H+H** + H2+ H + H+H** + H+ • Conditions: H2/He = 25/75, 10 mTorr, 300 W ICP **Translationally hot ICOPS10_13

  14. University of Michigan Institute for Plasma Science & Engr. Ar/C4F8/O2 CCP TRENCH ETCH Photo-Resist • CCP for trench etch. • Ar/C4F8/O2 = 80/15/5 • 40 mTorr, 300 sccm • 10 MHz • 5 kW • CFx polymer deposited on the side-walls efficiently seal the open pores. CFx polymers are harmful to diffusion barrier metals such as Ti and Ta. • Polymer layers can be removed by one of the following: • He/H2 plasmas without surface damage. • O2 plasmas that etch the CH3 groups. Porous Low-k SiCOH Si Animation Slide-GIF ICOPS10_14

  15. University of Michigan Institute for Plasma Science & Engr. POLYMER REMOVAL AND PR STRIPPING PR • He/H2 plasma used for both polymer (P) removal and photoresist (PR) stripping. • Hot H, H2, H+ and H2+ remove polymers and masking PR layers as CH4, HF, and CxHyFz H**+ POLY(s)  CF + HF H**+ POLY(s)  CHF2 H2**+ POLY(s)  CH2F2 H**+ PR(s)  CH4 H2** + PR(s)  CH4. • CHn groups are also activated by H removal H**+ CHn(s)  CHn-1 + H2. Porous Low-k SiCOH Si Animation Slide-GIF **Translationally hot ICOPS10_15

  16. University of Michigan Institute for Plasma Science & Engr. POLYMER REMOVAL, CH3 DEPLETION • Ar/O2 plasma efficiently removes polymer. • Also removes CH3 groups in pores as O atoms diffuse into the porous network. • Net result is increase in pore size. • Pore openings can get too large to easily seal. • He/H2 plasma removes polymer without significantly depleting CH3. Low-k SiCOH Si ICOPS10_16

  17. University of Michigan Institute for Plasma Science & Engr. SEALING: WITH POLYMER REMOVAL AND PR STRIP He/H2 Activation Sealing • Ar/O2 Clean: additional He treatment is required for surface activation, followed by NH3 plasma sealing. • He/H2 Clean: can do both activation and cleaning in a single step. • Successive NH3 plasma exposure seals the surface pores forming Si-N and C-N bonds. He/H2 Activation Sealing Si Si Animation Slide-GIF ICOPS10_17

  18. SEALING EFFICIENCY: PORE RADIUS University of Michigan Institute for Plasma Science & Engr. • Ar/O2 Clean: sealing efficiency decreases with increasing pore size. • H2/He Clean: selective cleaning does not enlarge openings. Broad angular distribution of H improves surface activation and sealing. Ar/O2 Clean He/H2 Clean Good Sealing Poor Sealing Animation Slide-GIF ICOPS10_18

  19. University of Michigan Institute for Plasma Science & Engr. SEALING EFFICIENCY: ASPECT RATIO • O2 Clean: sealing efficiency on sidewalls decreases with increasing aspect ratio. • He/H2 Clean: sealing does not degrade with higher aspect ratio. • Hot H activates all of the surface sites due to its broad angular distribution. ICOPS10_19

  20. University of Michigan Institute for Plasma Science & Engr. CONCLUDING REMARKS • Integrated porous low-k material sealing was computationally investigated • Ar/C4F8/O2 Etch • H2/He Clean, PR Strip, and Surface Activation • Ar/NH3 Sealing • He/H2 plasmas clean polymer, strips off PR and activates surface sites in a single step. Higher activation and lower damage seal the surface better. • Si-N and C-N bonds formed by adsorption on active sites followed by one N-N bond linking C or Si atoms from opposite pore walls. • For Ar/O2 clean, sealing efficiency degrades when pore radius is >1 nm and aspect ratio >10. He/H2 clean enables sealing of larger pores and higher aspect ratio trenches. ICOPS10_20

More Related