1 / 20

Final Assignment Air Car Chassis Design using Sketchup

Final Assignment Air Car Chassis Design using Sketchup. Directions: using the Chassis specifications sheet, design a chassis. Include: - dimensions (length, width, diameter of axle holes, distance from back and bottom of axle holes Color/render chassis in wood color

willis
Télécharger la présentation

Final Assignment Air Car Chassis Design using Sketchup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Final AssignmentAir Car Chassis Design using Sketchup

  2. Directions: using the Chassis specifications sheet, design a chassis. • Include:- dimensions (length, width, diameter of axle holes, distance from back and bottom of axle holes • Color/render chassis in wood color • Animation- include at least 5 “scenes” • File name: lastname_first_chassis_10a

  3. Scoring Rubric 10 -All of a 7 score plus the following:- dimensions (length, width, diameter of axle holes, distance from back and bottom of axle holes Color/render chassis in wood color Animation- include at least 5 “scenes” 7- rectangle dimensioned with axle holes File name: lastname_first_chassis_10a

  4. 1. Open blank sketchupdraw a rectangle from the origin to a size of 5 1/2” by 1 ½ “ by ¾” • First draw a rectangle to the size above5.5”,1.5” +enter • Then delete the person • Now click on ‘zoom extents’

  5. 2. Make rectangle ¾” high • Use ‘push/pull’ • Type in .75” +enter • Add dimensions

  6. 3. Add axle holes • Using ‘tape measurer’, begin at the bottom front right corner point- click and then move (not drag) the tape measurer along the vertical line until you reach ¼” • Click to create a reference point at ¼” • Then click and drag with the tape meas. across the front to the left edge

  7. 4. Create holes • Click with Tape M. and dragalong bottom to ¾”, make mark • Drag up with Tape M. to inter-sect • Use the circle tool – make a circle with diameter of 3/16” *TYPE IN .09375”

  8. 5. Label circle dimension and extrude the hole to the other side of the block • Delete the dashed construction lines using the eraser tool • Use the dimension tool to label the diameter of the circle

  9. 6. Extrude hole • Use the push/pull to extrude hole to the other side of the block • A-while holding inthe Push/Pull, typein 1.5” +enter

  10. 7. Repeat for the other axle hole!

  11. 8. Trim off/shape chassis • A- from the top view, shape wood (careful to keep your design “within specifications”) • Use the line tool- draw lines at the front and back to remove material- careful not to “cut” into the axle holes!

  12. 9. Modify chassis design • We will use the tape measurer to make construction lines. These lines will help us remove material from between the axles. • We want a thickness of ¾” from a size of 1 ½”. • So 1 ½” – ¾” = ¾” ¾ divided by 2 is 3/8. End result is that we want to remove 3/8” from each side of the rectangle

  13. Click and drag with the tape measurer from the edge of the chassis to 3/8”

  14. Do the same on the other edge

  15. Now use the line tool to draw on the chassis and use the construction (dashed lines) for reference

  16. Now use the push/pull tool to remove material

  17. Add a wood color

  18. Animation Rotate to a wide view of your design Go to ‘view’, ‘animation’, ‘add scene’ Then zoom in a bit and make another scene Add at least 5 scenes total As you work on this, click ‘play’ to See how your video looks

  19. Hand in the File! Lastname_first_chassis_classmod <<<(10a or 9b) Rename your file after you close the file “drag and drop” your file into our drop folder

More Related