1 / 23

Assembly Guide

Assembly Guide. solder the Front camera, the rear camera and flashlight, LCD, Volume key; Tool : electric soldering iron ,350℃. Paste a MALAR. Paste a MALAR. Paste conductive foam. Assembly the TP. Install the receiver and the LCD into the housing-A.

woodrowfischer
Télécharger la présentation

Assembly Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Assembly Guide

  2. solder the Front camera, the rear camera and flashlight, LCD, Volume key; Tool : electric soldering iron ,350℃

  3. Paste a MALAR

  4. Paste a MALAR

  5. Paste conductive foam

  6. Assembly the TP

  7. Install the receiver and the LCD into the housing-A

  8. Make sure the LCD in the fixed position

  9. Assembly the Light-sensitive sensor shelf

  10. Assembly the PCBA (please take care of the FPC of TP )

  11. Screw of PCBA

  12. Assembly the FPC of TP : a, unlock the TP connector (up);b, insert the FPC of TP; c, lock the TP connector (down)

  13. Assembly the volume key (FPC)

  14. Assembly the MIC

  15. Paste a conductive fabric to cover the MIC line

  16. Assembly MIC

  17. Paste a conductive fabric on the grounding of LCD and PCBA

  18. Paste the antenna on the Housing -B

  19. Install the SPK

  20. Assembly the housing A, housing B

  21. Assembly the housing A, housing B;(please take care of the volume key )

  22. Screw of housing

More Related