1 / 19

Elastic Pressure Transducer

Elastic Pressure Transducer. WASEEM ZIA (2007-CHEM-15). Synopsis:. Types Pressure Sensors Summary Functional Uses Merits & Demerits References. Types:. Bellows Bourdon tube Diaphragm. Bellows.

yael
Télécharger la présentation

Elastic Pressure Transducer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Elastic Pressure Transducer WASEEM ZIA (2007-CHEM-15)

  2. Synopsis: • Types • Pressure Sensors Summary • Functional Uses • Merits & Demerits • References

  3. Types: • Bellows • Bourdon tube • Diaphragm

  4. Bellows The bellows is a one-piece, collapsible, seamless metallic unit that has deep folds formed from very thin-walled tubing.

  5. Bourdon tube The bourdon tube pressure instrument is one of the oldest pressure sensing instruments in use today. The bourdon tube (refer to Figure 3) consists of a thin-walled tube that is flattened diametrically on contrary sides to produce a cross-sectional area elliptical in form, having two long flat sides and two short round sides.

  6. Bourdon tubes are generally are of three types; • C-type • Helical type • Spiral type

  7. Diaphragm Diaphragm elements are made of circular metal discs or flexible elements such as rubber, plastic or leather.

  8. Pressure Sensors Summary In a bellows-type sensor: • System pressure is applied to the internal volume of a bellows and mechanical linkage assembly. • As pressure changes, the bellows and linkage assembly move to cause an electrical signal to be produced or to cause a gauge pointer to move.

  9. Contd… In a bourdon tube-type sensor: • System pressure is applied to the inside of a slightly flattened arc formd tube. As pressure increases, the tube tends to restore to its original round cross-section. This change in cross-section causes the tube to straighten. • Since the tube is permanently fastened at one end, the tip of the tube traces a curve that is the result of the change in angular position with respect to the center. The tip movement can then be used to position a pointer or to develop an electrical signal.

  10. Contd…. In Diaphragm pressure sensor: • They are used to measure gauge pressures over very low ranges. • They may be made up of Metallic diaphragms gauge (brass or bronze) Slack diaphragms gauge (Rubber).

  11. Functional Uses: • Pressure sensors perform the following basic functions: • Indication • Alarm • Control • If a pressure sensor becomes inoperative: • A spare sensor element may be used (if installed). • A local mechanical pressure gauge can be used (if available). • A precision pressure gauge may be installed in the system.

  12. Contd…. • Environmental concerns: • Atmospheric pressure • Ambient temperature • Humidity

  13. Merits & Demerits Merits of Flexible Pressure transducer • Flexible Pressure transducer cost is low. • Flexible Pressure transducer has easy structure • Flexible Pressure transducers have been time tested in application. • Flexible Pressure transducer allows high accuracy, spatially in relation to cost.

  14. Contd…. Demerits of Flexible Pressure transducer • Flexible Pressure transducer has a low spring pitch. • Flexible Pressure transducer is inclined to shock and throb. • Flexible Pressure transducer is inclined to hysteresis.

  15. References • http://controls.engin.umich.edu/wiki/index.php/PressureSensors retrieved at 11/10/2010 • Kirk, Franklin W. and Rimboi, Nicholas R., Instrumentation, Third Edition, American Technical Publishers, ISBN 0-8269-3422-6. • Wightman, E.J., Instrumentation in Process Control, CRC Press, Cleveland, Ohio. • Rhodes, T.J. and Carroll, G.C., Industrial Instruments for Measurement and Control, Second Edition, McGraw-Hill Book Company. • Process Measurement Fundamentals, Volume I, General Physics Corporation, ISBN 0-87683-001-7, 1981 • http://vpmt.com/transducer.htm retrieved at 11/10/2010

  16. THANKS

More Related