1 / 32

FPGA CAD

FPGA CAD. 10-MAR-2003. Content. FPGA CAD design flow; Placement; Routing. (top ten hottest VLSI CAD problems). FPGA Design Flow. Designing with FPGAs is much like the ASICs technology.

yaron
Télécharger la présentation

FPGA CAD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FPGA CAD 10-MAR-2003

  2. Content • FPGA CAD design flow; • Placement; • Routing. • (top ten hottest VLSI CAD problems)

  3. FPGA Design Flow • Designing with FPGAs is much like the ASICs technology. • The Computer Aided Design (CAD) software provided by the FPGA vendor or third part is used to convert the given digital circuit (schematic or a high level description in VHDL or Verilog) into a stream of bits, which is then used to download to the FPGA.

  4. CAD Tools Max+Plus

  5. A Typical FPGA CAD Flow Design Entry Synthesis Logic Optimization Placement Packing LUTs to CLBs Mapping to k-LUT Routing Simulation Download to FPGA

  6. Placement – Find home for CLBs.

  7. Problem define • Assign position(X, Y) to modules; • Placement to minimize: • total wirelength; • critical path wirelength; • a combination of them. • Estimated model: • Circuit quality is determined by placement + routing; • Routing is a NP-hard problem. • NP-hard problem. (n!) • Time is a big issue. • Quality and time tradeoff.

  8. circuit before placement

  9. circuit after placement

  10. Heuristic method • Constructive methods: • Partitioning method: min-cut; • Clustering. • Iterative improvement: • Begin with a random or constructive placement; • Iterate to improve it; • Force directed method; • Simulated annealing. • Other method: • Genetic algorithm;

  11. Min-Cut Minimize cuts during partition

  12. Force directed method • Classical mechanics; • Using Hooke’s law; • Force vector computed on each module corresponding to all nets connections; • Solve a set of non-linear differential equations. force

  13. Simulated annealing • Generates best results; (industry standard) • Run time is a issue. • Model a physical annealing process. • VPR placer (placement tools available to us, developed in UoT).

  14. Physical Annealing • Take a metal and heat to high temperature until liquidized; • Allow it to cool slowly, metal is annealed to a low temperature; • Atoms in the metal are at transfer from high energy states to low energy states; • Can accept “bad” moves to get global minima. • Avoid getting trapped in local minima.

  15. Comparison

  16. Routing-Find the path • Maze routing; • Pathfinder.

  17. Routing Resource Connection Block Switch Block

  18. Typical Connection

  19. Maze router

  20. Pathfinder router • Based on maze router; • Shows very high quality results; • Negotiation-based router; • Each net negotiates the use of shared resources with other nets until none of the resources are shared; • Extra weights are added to shared resources. • VPR router;

  21. Comparison

  22. Questions

  23. Placement + Routing

  24. Design Entry • The description of a logic circuit can be entered by using a schematic capture program; • VHDL and Verilog interpreter.

  25. Synthesis • A circuit description such as VHDL, is first converted to a netlist of basic gates. This process called synthesis.

  26. Logic Optimization • technology independent; • Improve circuit, while keep functionality correct;

  27. Mapping to LUTs • The gates then are mapped into k-input lookup tables (LUT). (most basic brick of FPGA) • Chortle. (available to academic, developed in UoT)

  28. Packing LUTs into CLBs • Configurable Logic Block (CLB); • Grouping the LUTs into CLBs; • Simi liar to circuit clustering. • Vpack. (available to academic, developed in UoT)

  29. Placement • Placement is to determining the physical location of each CLBs on the FPGA;

  30. Routing • Realize connections among the CLBs by selecting routing resource. • wire segments and; • routing switches.

  31. Simulation • After placement and routing, the implemented design is simulated to ensure its functioning and to verify the timing issues. • Design errors can be found and corrected at this stage.

  32. Download bits file to FPGA • Once all the necessary steps are completed for implementing the design, the CAD system can download the result to the programming unit that is used to configure the FPGA; • After this stage, the programmable device is configured and ready for use.

More Related