1 / 10

Avtec Industries - Pultrusion Flat Plate Demo

Witness the unmatched technology and exceptional performance of Avtec Industries with a live demo showcasing pultrusion of 2”x.¼” flat plates using Iso-Polyester Resin. The process initiates with a start flame torch reaching 2500°F in 40 secs, leading to resin flashing off the surface. Experience the reflective and emissive glow effect of the surface barrier after 45 secs, with no smoke observed for 3 min or 5 min. The test concludes at 5 min 30 sec, verifying the structure's durability and integrity. Visit www.avtecindustries.com for more information.

yoshi
Télécharger la présentation

Avtec Industries - Pultrusion Flat Plate Demo

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. UNEQUALED TECHNOLOGY UNSURPASSED PERFORMANCE 9 Kane Industrial Drive Hudson, MA 01749 Phone: 978 562-2300 FAX: 978 562-8900 WWW.AVTECINDUSTRIES.COM

  2. Pultrusion 2”x ¼” Flat Plate, Iso-Polyester Resin

  3. Start Flame w/ 2500°F Torch

  4. 40 sec- Highly saturated resin flashes off surface NOTE: no smoke

  5. 45 sec- reflective and emissive glow of surface barrier can be seen NOTE: no smoke

  6. 3 min- NOTE: no smoke

  7. 5 min No change No smoke

  8. Test Concluded at 5 min 30 sec Structure is fully intact

  9. Conclusion, close up

  10. Conclusion, close up

More Related