Introducing. PremiSys - access control PremiSysID - security id badging Access control and badging capabilities are combined in a single software platform Users rights depend on licenses Hardware rights and badge-printing rights are licensed separately. Levels of PremiSys. PremiSys
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation
Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement.Téléchargez la présentation en cliquant sur ce lien.Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.
F I N
Plus de contenu associé
Transcription de la présentation
Introducing • PremiSys - access control PremiSysID - security id badging • Access control and badging capabilities are combined in a single software platform • Users rights depend on licenses • Hardware rights and badge-printing rights are licensed separately
Levels of PremiSys • PremiSys • Comes with 2 client licenses • PremiSysID is optional • Limited to 3 users and 40 readers • PremiSys Pro • Comes with 3 client licenses • PremiSysID is optional • no imposed restrictions of clients or readers See Coursebook, page 6, for feature comparison chart
PremiSys Licensing • No hardware keys (dongle) • License code is used to activate via online, fax, email or phone • Price is based on: • PremiSys or PremiSys Pro • with or without PremiSysID • Contact IDenticard to transfer a license registration to another PC, or to extend your 30-day trial period (Try Mode)
PremiSys Licensing • Go to Help > License: • to view system level & options • to add client licenses or upgrade to Pro • to view number of licenses remaining
PremiSys Licensing • PremiSys - allows hardware configuration, system monitoring, but no badge-printing • PremiSysID - allows tasks related to security ID badging, but no hardware configuration/monitoring Note: a single system user with full rights, including card printing, will occupy one seat of each.
Resources • Partner Website (IDenticard.com) latest news and technical documentation Web-to-case form to request support • Support Staff IDenticard Access Regional Managers (ARMs) Regional Manufacturer Representatives Technical Support 800-220-8096 Monday through Thursday, 8:30 am - 6 pm; Friday, 8:30 am - 5 pm; closed Sat/Sun • Training Opportunities Product certification, refresher, end-user training • Aaron Henderson, Product Manager Feature requests and road map
Competitive Take-Over • It may be possible to replace a competitor’s head-end software with PremiSys • Contact your Manufacture’s Rep or IDenticard Access Regional Sales Manager for more details
Software Demos • PremiSys Demo Simulator Recommended for Sales Demos View it online or download files for offline demos No installation of software is required IDenticard.com > Login > Training > Self-Study • “Try-Mode” Software installation Recommended for software setup and training Does not install with any sample data Download or obtain CD from Partner Request Form
Hardware Controllers communicate with server PC; hold local memory onboard • Two-Reader Controller • IP Controller • POE Controller SIO Boards downstream from controllers (via hardwire or IP*), provides inputs/outputs/readers • 2 Reader board • 1 Reader board • 16 Input board • 16 Output board • POE Reader board* • 9000 Panels • 9000 RIO boards PREM-CTLR-2RDR PREM-CTLR-IP PREM-CTLR-POE PREM-BRD-2RDR PREM-BRD-1RDR PREM-BRD-IN PREM-BRD-OUT PREM-BRD-POE*
PremiSys Controllers Similarities and differences between the PremiSys controllers: Two-Reader Controller PREM-CTLR2RDR IP Controller PREM-CTLRIP POE Controller PREM-CTLRPOE
Controller Communication Host Server Communication Ethernet PremiSys Server PC Ethernet | CAT 5 Cable
Controller Overview Host Server Communication PremiSys Server PC 232 4-wire RS-232 | 22 AWG | 50’ max
Controller Overview Host Server Communication PremiSys Server PC 485 RS-232 2-wire RS-485 | 22 AWG | 4000’ max
ControllerOverview Host Server Communication Redundancy 2-wire RS-485 | 22 AWG | 4000’ max
ControllerOverview Host Server Communication Redundancy 2-wire RS-485 | 22 AWG | 4000’ max
Controller Overview Wiring for power and verifying power and operation • Power supplies are sold separately (3 Amp or 10 Amp) • Observe polarity for all DC wiring • Locate power supply as close to the controller as possible • Use twisted pair, 18 AWG wire • LEDs indicate proper powering and response Controllers and I/O boards typically do not power auxiliary devices. Under certain circumstances, readers can be powered by the board. Under special circumstances, door strikes may be powered by POE equipment. Otherwise, use auxiliary power.
Controller Overview General Practices for Grounding • Don’t connect shields on data cables to signal-ground pins • Use dedicated wires for signal grounds • Connect the grounding lug in the enclosure to an earth ground • Connect cable shield to the grounded lug in the enclosure, but only at one end, usually the controller
Add I/O Boards Hardwire back to controllers: 2-wire RS 485 for I/O communications Ethernet back to controllers: only the POE Reader Board does this Recommended/Default baud speed is 38,400 If you have 9000 hardware downstream, baud speed must be set for 9600
I/O Communications PREM-CTLR-IP has two downstream I/O communication channels IP Controller IP • The IP controller has no onboard door control • A total of 64 I/O boards may be wired downstream (eight can be Series 9000) • Up to 32 boards on each of two downstream channels, addressed 0-31 • No more than 32 total reader boards total downstream for a total maximum of 64 readers. Other I/O boards would have to be the input-only or output-only boards
Add I/O Boards • The number of reader ports may not exceed 64: IP or 2RDR Controller • The number of reader ports may not exceed 17: POE Controller “Onboard I/O” • Include the readers on the “Onboard I/O Board” (2RDR & POE Controllers)
Two-Reader Board: 2 Reader Ports 6 Outputs 8 Inputs dedicated inputs for tamper and power For a 2RDR board, reader voltage is selectable: Choose either 12 VDC or pass-through voltage.
One-Reader Board: 1 Reader Port 2 Outputs 2 Inputs jumper J3 for tamper monitoring Boards are recommended to be powered with 12 VDC. For a 1RDR board, If 12 VDC is too great for its reader, step-down power to reader or use auxiliary power supply for reader.
Input Board: 0 Reader Ports 2 Outputs 16 Inputs dedicated inputs for tamper and power
Output Board: 0 Reader Ports 16 Outputs 0 Inputs dedicated inputs for tamper and power
POE-Reader Board: 2 Reader Ports* On-board RJ-45 2 Relays 4 Inputs *Supports one door only Communication to controller: Ethernet only, no hardwire option
I/O Communications All downstream I/Os must have a unique hardware address (per downstream channel) 9000 control panels and RIO boards will need to be re-addressed 0 - 31 Be sure to enter matching address and baud rate in the software setup
Door Components Wiring Inputs • use for door monitoring (contact & REX) or other input devices • Supports “1K normal, 2K active” and “2K normal, 1K active” or unsupervised (NO or NC) devices • requires one twisted pair per input • rated at 30 ohms (max)
Door Components Input Wiring Configuration Options • Supervised Alarm Input: • 1K normal, 2K active • 2K normal, 1K active
Fail-Safe Mag Lock Door Locks Use an IDenticard Suppressor Kit if the door lock does not have transient clamping. The kit should be located as close to the load as possible (within 12 inches). Fail-Secure Door Strike Suppressor Kit Make sure the lock equipment does not exceed relay contact ratings: 5A @ 28 VDC
