1 / 22

Navigating REMI: Review of User Interface

Navigating REMI: Review of User Interface. Pam Perlich URBPL 5/6020. Examine the Baseline. Close the “REMI Start-up Options” Dialogue Box Click on “Standard Regional Control” Select “Results” tab of the “Standard Regional Control”. Close this dialogue box. Click on this. Click on this.

zaide
Télécharger la présentation

Navigating REMI: Review of User Interface

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Navigating REMI:Review of User Interface Pam Perlich URBPL 5/6020

  2. Examine the Baseline • Close the “REMI Start-up Options” Dialogue Box • Click on “Standard Regional Control” • Select “Results” tab of the “Standard Regional Control”

  3. Close this dialogue box

  4. Click on this

  5. Click on this

  6. Click on this

  7. Commuting Information

  8. Extreme hint for Project 5

  9. Dev Sight Displays Data

  10. New Regional Simulation • On the file menu, select “New Regional Simulations” • Go through each of the 4 tabs and make selections • Forecast selection • Policy variable selection • Policy variable values • Run Options

  11. Creating Inputs • Each input is specific to a variable and year • If the “shock” is permanent, it must be entered in each year for the variable • Otherwise, you have a one year shock that is gone in subsequent years.

  12. Firm vs. Industry (Sales or Employment) • Firm allows displacement due to competition in the local and nearby markets and the US market. In other words, "crowding out" effects may arise. • Industry does not account for any "crowding out" effects. Industry is equivalent to increasing exports to rest of world, and therefore does not compete with the nation or with the particular region. • Both firm and industry apply to sales or employment shocks. Source: REMI FAQ: http://www.remi.com/support/faq3.html#1

  13. Firm vs. Industry Shocks • Instead of comparing the effects of the two, determine which is the more relevant policy variable for your situation. • Use firm employment if the job loss/gain will be at least partially offset by rivals or new market entrants (e.g., service sectors). • Use industry employment if the job loss/gain probably will not be offset • This will be the case if the demand is more national or international than local (e.g., manufacturing). Source: REMI FAQ: http://www.remi.com/support/faq3.html#1

  14. Firm vs. Industry Shocks • If a portion of the increase will • be subject to competition • but a portion will be impervious to crowding-out effects • Create a "hybrid" simulation in which a portion of the employment is entered as firm and a portion as industry. http://www.remi.com/support/faq3.html#1

  15. Sales vs. Demand Variables • As a general rule, choose sales vs. demand based on whether the incremental output is to be produced • exclusively by local industry • or by some combination of firms internal and external to the region. http://www.remi.com/support/faq3.html#2

  16. Sales vs. Demand Variables, cont. • If all new output will be generated by that region's industry, increase Industry Sales or Firm Sales. • But if the output will be provided by a combination of internal and external producers, based on the Trade Shares accessible through the Options menu, increase Exogenous Final Demand. • Using demand variables is preferable when you don't know the source of the increased output. http://www.remi.com/support/faq3.html#2

  17. Interpretation of Output • All outputs are impacts • When you create a regional simulation, you are creating an alternative projection • The model outputs are the differences between your alternative scenario projection and the baseline projection into the future

More Related