1 / 18

Physical principles of nanofiber production 1. Needle-less electrospinning

Physical principles of nanofiber production 1. Needle-less electrospinning. D. Lukáš 2010. 3.6. Self-organisation of electrospinning jets on free liquid surfaces. Needle electrospinning:

zenia-larson
Télécharger la présentation

Physical principles of nanofiber production 1. Needle-less electrospinning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Physical principles of nanofiber production1. Needle-less electrospinning D. Lukáš 2010

  2. 3.6. Self-organisation of electrospinning jets on free liquid surfaces

  3. Needle electrospinning: Self-organisation of the fluid in electrospinning is the underlying cause behind formation of the Taylor cone, the stable jet part, the whipping zone and evaporation of solvent. Now, it will be shown that the self-organising potential of electrospinning is even more forcerful since it has a power to organize : individual jets on free liquid surfaces without any need to use needless / capillaries to create them. This finding is enormously attractive regarding the recent effort to elevate electrospinning technology to industrial level because it opens a chance to design simple as well as highly productive lines for nanofibrous layer production.

  4. A rode instead of a needle E = Ec E = 0 + + + + + + + + + + + + + Stationary wave d=1cm 1 2 3 4 Epoxy resin E Ec F. Sanetrník no. 1 2 3 4 5 6 Sandra Torres 5 6

  5. Dynamic phenomenon: field strength increment can lead to unlimited growth of a wave amplitude. A. Sarkar Wave vector Amplitude Angular frequency Growth factor

  6. Stable amplitude Growing amplitude Dispersionlaw Lukas D Sarkar A Pokorny P,Self organization of jets in electrospinning from free liquid surface - a generalized approach, accepted for publication, Journal of Applied Physics, 103 (2008), 309-316. Electrospinning - X-rays

  7. D. Lukas, A. Sarkar, and P. Pokorny, Journal of Applied Physics, 103 (2008)

  8. Euler equation Velocity potential Elektrostatic forces gravitation Surface tension Equation of continuity dispersion law Prague 2007

  9. Tonks-Frenkelinstability E Various field strengths E Stable waves of various wave numbers and angular frequencies. Fastest forming instability The only wave Electrospinning - X-rays

  10. Capillary waves Electrospinning Relaxation time Growth factor

  11. Quadratic equation with the only solution Critical field strength

  12. capillary length

  13. Dimensionless electrospinning number

  14. Minimal and negative square values of the angular frequency correspond to the maximal growth factors, q’s, inherently connected with the self-organisation caused by the mechanism of the fastest forming instability. +

  15. dimensionless intra-jet distance

  16. L Electrospinning - X-rays

  17. b 32 kV 43 kV Linear clefts emit polymeric jets. Linear clefts in (a) and (b) emit polymeric (polyvinyl alcohol) jets at the voltages, 32 kV and 43 kV, respectively. The inter-jet distance / wavelength is l. The distance between the cleft and the collector was adjusted on 802 mm. Electrospinning - X-rays

  18. Technology Jirsák, O. Sanetrník, F. Lukáš, D. Kotek, V. Marinová, L. Chaloupek, J. (2005) WO2005024101 A Method of Nanofibres Production from A Polymer Solution Using Electrostatic Spinning and A Device for Carrying out The Method. www.elmarco.com Electrospinning - X-rays

More Related