1 / 15

Presentation 26:

Presentation 26:. HIP RAFTER LAYOUT. Hip Rafter Layout Lines. There are many layout lines on a hip rafter. Hip Rafter Layout Lines. These lines are added one line at a time. Hip Layout for Ridge. Draw ridge plumb line. This is not the cut line. Hip Layout for Ridge.

zev
Télécharger la présentation

Presentation 26:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Presentation 26: HIP RAFTER LAYOUT

  2. Hip Rafter Layout Lines • There are many layout lines on a hip rafter.

  3. Hip Rafter Layout Lines • These lines are added one line at a time.

  4. Hip Layout for Ridge • Draw ridge plumb line. • This is not the cut line.

  5. Hip Layout for Ridge • Rafter must be shortened for the ridge. Usually 1 1/16″ • Shortening = ½ the diagonal thickness of ridge. • Draw a square line on the top with a center mark.

  6. Hip Layout for Ridge • Side cuts are added for fit. • Side cut = ½ the thickness of hip. Usually 1 1/16″ Usually 3/4″ • Draw angled line over the top. • Red lines are the cut lines.

  7. Hip Rafter Length • Unit Length x Run = Rafter Length

  8. Hip Rafter Length • If the building span is 24′, then the run is _____. 12 • If the unit rise is 6″, the hip unit length is ______. 18″ • The hip rafter line length is … 12 units of run x 18″ = 216″

  9. Hip Rafter Length 216″ • Rafter Length = • Measured from first ridge plumb line.

  10. Bird’s Mouth Layout 216″ • Draw heel plumb line. • Measure down equal to common rafter bird’s mouth height. • Draw seat cut line.

  11. Bird’s Mouth Layout • Measure back along seat line ½ hip thickness. • Measure down plumb to the bottom edge of rafter. Usually 3/4″

  12. Same Bird’s Mouth Layout • Measure back along seat line ½ hip thickness. • Measure down plumb to the bottom edge of rafter. • Raise seat line this distance. Usually 3/4″ • Red lines are cut lines.

  13. Hip Tail Layout • Determine the location of hip fascia plumb line • Either measure the run • Or measure the length • Measure down the plumb line same as the common rafter • Draw level line • Square over the top with a center mark

  14. Same Usually 3/4″ Hip Tail Layout • Raise level line same as bird’s mouth seat line. • Measure back from plumb line ½ hip thickness. • Draw angled lines on top. Usually3/4″ • Red lines are cut lines.

  15. Conclusion • Hip layout lines are added one at a time.

More Related