1 / 39

PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011

PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011. Huzairy Hassan School of Bioprocess Engineering UniMAP. Reaction Equilibrium in Ideal Gas Mixtures. Introduction.

zorana
Télécharger la présentation

PHYSICAL CHEMISTRY ERT 108 Semester II 2010/2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. PHYSICAL CHEMISTRYERT 108Semester II 2010/2011 Huzairy Hassan School of Bioprocess Engineering UniMAP

  2. Reaction Equilibrium in Ideal Gas Mixtures

  3. Introduction Calculate the equilibrium composition for an ideal-gas reaction from the initial composition, the temperature and pressure, and . To apply the equilibrium condition to an ideal-gas reaction, we need to relate the chemical potential of a component of an ideal gas mixture to observable properties.

  4. Chemical Potentials in an Ideal Gas Mixture Chemical Potential of a Pure Ideal Gas, µ • µ for a pure gas depends on T and P only. • Since for reaction equilibrium  mostly studied at constant Twhile the partial pressure of the reacting gases vary.  variation of µ with pressure.

  5. The Gibbs equation for dG for a fixed amount of substance is: and division by the number of moles of the pure ideal gas gives; Since the chemical potential µ of a pure substance equals (Eq 4.86), for constant T, this equation becomes;

  6. If the gas undergoes an isothermal change of state from pressure P1 and P2, integration gives; )

  7. Figure 6.1 plots at fixed T. For a pure ideal gas; and Hm is independent of pressure. So, the pressure dependence of µ in the figure is due to the change of Sm with P. In the zero pressure, S becomes infinite, and µ goes to - .

  8. Chemical Potentials in an Ideal Gas Mixture Definition; - An ideal gas mixture is a gas mixture having the following properties: (1) the equation of state is obeyed for all temperatures, pressures, and compositions (ntot is the total number of moles of gas) (2) if the mixture is separated from pure gas i(i is any one of the mixture’s component) by a thermally conducting rigid membrane permeable to gas i only, then at equilibrium the partial pressure of gas i in the mixture is equal to the pressure of the pure- gas-i system.

  9. The standard state of component i of an ideal gas mixture at temperature T is defined to be pure ideal gas i at T and pressure P⁰ ≡ 1 bar. Let be the chemical potential of gas i in the mixture, and let be the chemical potential of the pure gas in equilibrium with the mixture through the membrane. For phase equilibrium, From condition (2), at equilibrium. Therefore for ideal gas mixture; (Eq. 6.3)

  10. From Equations 6.2 and 6.3; Where is the partial pressure of gas i in the mixture, and is the chemical potential of pure ideal gas iat the standard pressure of 1 bar and at the same temperature T as the mixture. Is the fundamental thermodynamic equation for an ideal gas mixture.

  11. Ideal-Gas Reaction Equilibrium Now, we specialize to the case where all reactants and products are ideal gasses. For the ideal-gas reaction:

  12. (Eq. 6.14) (Eq. 6.15) is the standard equilibrium constant (or the standard pressure equilibrium constant) for the ideal-gas reaction.

  13. For example, for the ideal-gas reaction; From Eq. 6.7; ⨳ (Eq. 6.18) The standard equilibrium constant is dimensionless.

  14. Example 6.1 - Finding and ΔGº from the equilibrium composition.

  15. Solution: Since 0.711 mmol of CS2 was formed, so, for H2 (the same); 4(0.711 mmol) = 2.84 mmol of H2 was formed. For CH4 (0.711 mmol reacted), 5.48 mmol – 1(0.711) mmol = 4.77 mmol CH4 present at equilibrium. For H2S, 11.02 mmol – 2(0.711) mmol = 9.60 mmol H2S present at equilibrium. To find , we need partial pressure . We have and P = 762 torr and xiare the mole fractions.

  16. At equilibrium; we have total moles = 9.60 + 4.77 + 2.84 + 0.711 = 17.92 and partial pressure,

  17. For the ;

  18. Temperature Dependence of the Equilibrium Constant Differentiation of with respect to T; Use of gives; (pressurefixed at 1 bar)

  19. From Equation 6.32 & 6.33; Where is the reaction’s standard entropy change, then; Since ΔGº = ΔHº - T ΔSº, then; van’t Hoff equation

  20. Multiplication of Eq. 6.36 by dT and integration from T1 to T2 gives; *

  21. Example 6.2 Change of with T Find at 600 K for • Using the approximation that ΔHº is independent of T; • Using the approximation that is independent of T

  22. Solution: • From Appendix data, for NO2(g) and N2O4(g); = 57.20 kJ/mol = 4730 J/mol From ΔG⁰= - RT ln = = e – ((4730 J/mol) / (- 8.314 J/mol K x 298 K)) = 0.148

  23. From Eq. 6.39;

  24. (b) is assumed independent of T, then; Appendix data gives , then ⨳

  25. Figure 6.6 • – plots ΔHº, ΔSº, ΔGº and RlnKºpvs. T • - plots lnKºpvs. 1/T

  26. Example 6.3 ΔH⁰ from K⁰Pversus T data Use Figure 6.6b to estimate ΔH⁰ for for temperatures in the range 300K to 500K. Solution: Since only an estimation, consider the line is straight. We have 2 points; T-1 = 0.0040 K-1 , ln Kºp= 20.0 T-1 = 0.0022 K-1 , ln Kºp= 0

  27. Hence, the slope is; (20 – 0) / (0.004 K-1 - 0.0022 K-1) = 1.1 x 104 K The slope of plot ln Kºpvs.K-1 is -ΔHº / R, so ΔH⁰ = -R X slope = -(1.987 cal/mol K)(1.1 x 104 K) = -22 kcal/mol (in agreement with Figure 6.6a) ⨳

  28. Ideal–gas Equilibrium Calculations Aims- find the equilibrium composition of an ideal-gas reaction mixture and • Equilibrium composition is related to the initial composition by a single variable, the equilibrium extent of reaction ; where ni,0 is the number of moles of substanceipresent at the start of reaction. - ξ measures how much reaction has occurred.

  29. The specific steps to find the equilibrium composition of an ideal-gas reaction mixture are as follows;

  30. Example 6.4 Equilibrium composition at fixed T and P Find the equilibrium composition.

  31. Solution: Step 1 Use Appendix data to get ; = [ 2 (NO2, g)] - [ (N2O4, g)] = 2(51.31) – 97.89 = 4.73 kJ/mol Step 2

  32. Step 3 Step 4

  33. Step 5

  34. Step 6

  35. Thank you

More Related