1 / 12

Electron Deflection

Electron Deflection. How does a TV or computer monitor work? There are different technologies that can be employed, but one of the older ones is the use of a CRT (cathode ray tube).

jonny
Télécharger la présentation

Electron Deflection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electron Deflection How does a TV or computer monitor work? There are different technologies that can be employed, but one of the older ones is the use of a CRT (cathode ray tube). In a CRT, electrons are obtained by heating a wire, then accelerating these electrons up to a speed using a pair of charged plates, and then deflecting this electron beam by other charged plates.

  2. Diagram screen heater Vdeflecting + h AC d - - + L Vaccelerating

  3. Relations • To find vx, use conservation of energy:½ mvxi2 + qVacc-i = ½ mvxf2 + qVacc-f where vxi=0 and (Vacc-f – Vacc-i) = Vaccelerating so: (1/2)mvx2 = q*Vaccelerating . If we know m, q, and Vaccelerating, we can determine vx. • To find the height, h, we first realize that we have a constant electric field between the horizontal parallel plates that do the deflecting. If the Electric field is constant, so is force, and thus so is the acceleration (in the y direction).

  4. Relations • (1/2)mvx2 = q*Vaccelerating, or vx = [2*q*Va/m]1/2 • Vdeflecting = Ey * d , or Ey = Vdeflecting / d • Fy= q * Ey = q * Vdeflecting / d • Fy = m*ay , or ay = Fy / m = q*Ey/m = q*Vdeflecting / (m*d) = ay . • vx = constant, so vx = L/t, or t= L/vx . • ay = constant, so y = h = yo + vyot+ (1/2)ayt2, where yo = 0 and vyo = 0 , so h = (1/2)ayt2 .

  5. Review of relations • vx = [2*q*Vaccelerating/m]1/2 • ay = q*Vdeflecting / (m*d) • t= L/vx , or t2= L2/vx2 = L2 *m / [2*q*Vaccelerating] • h = (1/2)ayt2 We can put all four relations together to form one relation connecting h, q, Vdeflecting, m, d, L, and Vaccelerating. In the computer homework, we are given: h, q, m, d, and L. We are asked for Vdeflecting and Vaccelerating .

  6. Result Since we have one (final) relation and two unknowns, we can then choose (within limits) one of the unknowns (say, Vacc) and then solve for the other (Vdefl). Since we are dealing with electrons, remember that electrons are attracted to the positive plate. This fact determines which plates should be positive and which plates should be negative.

  7. Special case Please note that the equations we have developed will work for the case where the screen is right at the end of the deflecting plates. If the screen is placed a little further from the plates, we can determine the position of the beam at the screen by using the fact that the electron beam will go straight once it leaves the space between the deflecting plates. In the computer homework for this course, you are not required to do this extension.

  8. Series and ParallelPractice with identification How are the elements (labeled E – could be either capacitors or resistors) connected below? How do we determine this? Are E1 and E2 connected in series in both? Are E2 and E3 connected in parallel in both? E1 E2 E3 E2 E3 E1

  9. Series and ParallelPractice with identification In the circuit on the left, the current has to go through E1 (E1 is in series with whatever follows), but then the current has a choice of going through either E2 or E3 (so E2 and E3 are in parallel). E1 is not in series with E2, rather it is in series with the parallel combination of E2 & E3. E1 E2 E3 E2 E3 E1

  10. Series and ParallelPractice with identification In the circuit on the left with the E’s being resistors, if R1 = 8 Ω, R2 = 2 Ω, and R3 = 20 Ω, then the parallel combination R2 & R3 gives a resistance of 1/R23 = [(1/2Ω) + (1/20Ω)] = .55/ Ω, so R23 = 1.82 Ω, and the total resistance is Rtotal = 8 Ω + 1.82 Ω = 9.82 Ω. E1 E2 E3 E2 E3 E1

  11. Series and ParallelPractice with identification In the circuit on the right, the current has a choice to go through E2 or E3 (so parallel connection) but once it goes through E2 it must go through E1 (so E1 and E2 are in series). If it goes through E3, it does not have to go through E1. E3 is in parallel with the series combination of E2 and E1. E1 E2 E3 E2 E3 E1

  12. Series and ParallelPractice with identification In the circuit on the right, with the E’s being resistors, if R1 = 8 Ω, R2 = 2 Ω, and R3 = 20 Ω, then the series combination R1 & R2 gives a resistance of R12 = 8 Ω + 2 Ω = 10 Ω, and the total resistance is: 1/Rtotal = [(1/10Ω) + (1/20Ω)] = .15/Ω so Rtotal = 6.67 Ω. E1 E2 E3 E2 E3 E1

More Related