1 / 25

“Good” Safety Practices and “Bad” Laboratory Practices

“Good” Safety Practices and “Bad” Laboratory Practices. Buddy System. Be Safe! Don’t be alone when working with hazardous materials or in dangerous work conditions. Your life can depend on it!!. Buddy System. When performing potentially hazardous/dangerous operations always:

kirtana
Télécharger la présentation

“Good” Safety Practices and “Bad” Laboratory Practices

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. “Good” Safety Practices and “Bad” Laboratory Practices

  2. Buddy System Be Safe! Don’t be alone when working with hazardous materials or in dangerous work conditions. Your life can depend on it!!

  3. Buddy System • When performing potentially hazardous/dangerous operations always: • Make sure someone is in the laboratory with you or • Notify someone that you are in the lab and what time you will check with them when you complete your work. • Check-in with that person if you exceed your time estimate or if you leave.

  4. A Clean Lab is a Happy Lab

  5. A Cluttered Lab is a Dangerous Lab! Keep your lab clean!

  6. Housekeeping!! The Results of Poor housekeeping: • Accidents • Cluttered counter tops are a good source of spills. • Poorly maintained equipment or apparatus can break spilling its contents, damage other equipment or flying debris can cause injury. • Containers and equipment on the floor are a trip and spill hazard.

  7. Housekeeping!! The Results of Poor housekeeping: • Costs you money • Overstocking or reordering of chemicals due to uncontrolled or unmanaged inventory. • Replacing spilled chemicals or damaged equipment.

  8. Housekeeping!! The Results of Poor housekeeping: • Contaminates your research • Poorly washed containers or equipment can lead to cross contamination. • Poorly labeled storage containers can lead to the use of a wrong reagent.

  9. Housekeeping!! Poor housekeeping: • Causes accidents: • Costs you money • Contaminates your research • Sets up bad habits for students entering a more regulated industrial setting.

  10. Don’t Block Access to Electrical Panels, Safety Showers and Eye Wash Stations

  11. Unattended Bunsen burner causes bench fire. Never leave lit Bunsen burners unattended or use flammable solvents near them.

  12. Old Equipment Can Be Dangerous Rusty water-bath with exposed wires

  13. Improper Chemical Storage • Ether was stored in this domestic style refrigerator. Either the thermostat or the interior light was the ignition source that caused the explosion.

  14. Lack of Attention to Details Heater/stir plate being used to stir only accidentally was also turned on as hot plate also!

  15. Incomplete reaction placed in refrigerator – BANG! See the glass imbedded In the door? Reaction container was placed into the refrigerator before the reaction had been completely quenched. The bottle over pressurized and exploded.

  16. Do Not Store Consumables with Chemicals!

  17. Proper Equipment Usage • There needs to be a written Standard Operating Procedure for all equipment. • Everyone should be properly trained before using any equipment. • Improperly used or maintained equipment can be dangerous to your health or can result in expensive damages. • Fires are common result with inappropriate equipment usage.

  18. Centrifuges- An Example of Improper Usage and Maintenance

  19. Hazards • Mechanical failure of rotating parts (often violent). • Contact with rotating parts. • Sample leaks causing aerosols, stress corrosion, contamination. • Sample imbalance causing machine movement / walking (or stress failure of component parts). • Fire or explosion. • Health (contact with contaminated components / vapors). • Ergonomics/lifting

  20. Rotor Failure

  21. Rotor Failure

  22. Rotor Failure

  23. Contained Rotor Failure

  24. Dancing Centrifuge This can be caused by an improperly balanced rotor.

  25. The End

More Related